Canon FC 2
Experienced technical support provide their insights in answering this question :
Have same problem what the fix
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The 5C00 error indicates that there may be problem inside of the printer; if resetting the printer did not resolve the error, the printer will require servicing. Please call or email us at one of the methods on the Contact Us page to obtain your servicing options. Did this answer your question?
Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you`re trying to print. The loading bay for your paper might have become lodged with paper or you`re using the wrong type of paper.
While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button. 2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
Canon printer error: “Error e02”
Error code e02 occurs due to overheating of the printhead or when the paper is not correctly placed into the input tray and therefore the paper feed rollers are unable to pick up the paper from the paper tray.
The Canon 5200 error is often related to the ink levels present in printer cartridges. Turning your printer off and on again can reset the printer`s mechanism for reading ink levels and get you back to printing in no time.
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Canon iP90 Service Error Message 5C00
Have same problem what the fix
Printer Canon i560 Service Error?
1 Turn off the printer.
Canon Pixma MX870, Error 6000 and Service Manual
Brand new MX922. Printed a couple of pics and now the 6000 error. Can’t see any obstruction. Could you provide the manual for dismantling the unit further? Or pointers for getting further into the box than just looking through the little folding inkwell door?
Canon BJC-70 error message F 12
I am having the same problem, not only with my BJC-70, but also the equivalent problem with my BJC-80. Typically I am working at my computer, and the printer is powered up, but idle. All of a sudden for no apparent reason, it emits a series of beeps and returns the print head to the central position. The BJC-70 display Error F12. With the BJC80 you have to count the beeps. The problem seems to be caused by some sort of premature failure of the print head, due to an electronic fault. Sometimes, if the printer is powered down for a few minutes or longer, it will work normally for a short time after power is re-applied, but typically the problem recurs within 30 minutes, and this period of trouble free operation gradually reduces, until the print head will not work at all. The only solution is to replace the offending print head. You should, however, retain the failed head, in order to salvage any un-used ink remaining in the tanks. The new print head comes with full ink tanks. As soon as one of these fails, I replace it with an ink tank retrieved from the failed head. I don’t discard the failed head until both ink tanks have been retrieved.
canon MP 700 error message
It would be ideal if you take after the progressions beneath:
ERROR On New Canon iR Advance C2030
Error E020-060 was solved by changing the new memory chip with an old one. It worked very well.
Search it on google
Canon MP530 – Head Alignment Error
Hi Trigger, can you please let me know how this was resolved as I have a similar problem.