Printer Canon i560 Service Error?

Canon Color Bubblejet (BJC) 5100

Experienced technical support provide their insights in answering this question :

1 Turn off the printer.

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

An ink cartridge isn`t seated properly.

Check the following: Make sure print head (cartridge) holder motion is not impeded by stabilizer, jammed paper, etc. Remove any impediment. Make sure the print heads (cartridges) are properly installed.

Make sure the ink cartridges are properly installed. Push up the ink cartridge lock lever until it clicks. Make sure that the ink cartridge holder motion is not impeded by stabilizer, jammed paper, etc. Remove any impediment.

Error 5100 is a general error from the Microsoft . NET installer that can have a number of meanings: . NET has already been installed and target computer needs to be rebooted.

Check the following: Make sure print head (cartridge) holder motion is not impeded by stabilizer, jammed paper, etc. Remove any impediment. Make sure the print heads (cartridges) are properly installed.

Paper is jammed or there is an object inside the printer. The printer needs to be reset.

An ink tank(s) is not seated properly. Paper is jammed or there is an object inside the printer. The printer needs to be reset. The encoder film/strip may need to be cleaned.

Confirm that there are no materials (e.g. jammed paper) that is preventing the print head holder from moving. If any, remove the materials. Confirm that The print head lock lever is locked securely. Push the right and left tabs of the print head lock lever until each clicks into place.

When the message “5100 / 5110 Printer error has occurred. Turn off power then back on again. If problem persists, see the manual.” is displayed, the behavior of the print head holder has interrupted.

What ink cartridges does the Canon Pixma TS5100 take? The Pixma TS5100 accepts Canon PG-540 and CL-541 ink cartridges in standard and XL sizes.

If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.

The password is set at the time of purchase. The password is the printer serial number. The printer serial number is printed on the sticker attached on the printer. It consists of 9 alphanumeric characters (four alphabets followed by five numbers).

The Maintenance tab allows you to perform printer maintenance or change the settings of the printer. Performs print head cleaning. Print head cleaning removes any blockage in the print head nozzles.

Press [Function Settings] → [Printer] → [Printer Settings].

Support Code=5500, 5501

Ink tank has not been properly recognized. Contact the service center.

The error code 0x0000002C, 0x00000000 typically occurs in systems where multiple AC feeds are powered on sequentially rather than simultaneously. An Onboard Administrator firmware update should remedy this problem.

0x is te prefix used to represent numbers in hexadecimal notation. In this case, 0x00000000 is the value used to represent null memory adresses (equivalent to the keyword null for high level languages like Java, C# and many others).

The Canon Printer error code 5011 is a common error and you can clear this error message within a few minutes. This error code appears when the ink cartridge holder is stuck, or a piece of paper is stuck on the cartridge holder. It may also happen due to a misplaced cartridge.

While the printer is on, unplug the power cord from the printer. While the power is off, press the power button 5 times. After 60 seconds plug the power cord back in and power on the printer. If the reset does not resolve the error, the printer will require service.

E, 1, 6 (LED display)

The ink has run out. Replace the ink cartridge and close the paper output cover. If printing is in progress and you want to continue printing, press the machine`s Stop/Reset button for at least 5 seconds with the ink cartridge installed. Then printing can continue under the ink out condition.

The Canon 5200 error is often related to the ink levels present in printer cartridges. Turning your printer off and on again can reset the printer`s mechanism for reading ink levels and get you back to printing in no time.

This Canon Pixma HOME TS5160 printer utilises quality PG640 and CL641 ink cartridges.