Unknown Printer
When you select print machine starts but paper does not move from tray into machine .Alarm is activatedpaper jam there is no paper in machine at all

Experienced technical support provide their insights in answering this question :
Probably a worn feed roller. You can try cleaning it with a damp rag as it might just be covered with paper dust.

How to Identify and Fix Common printer Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Check1 Make sure that the printer is turned on. Check2 Make sure that the Wi-Fi lamp is lit on the front side of the printer. If the Wi-Fi lamp is off, Wireless LAN is inactive. To activate Wireless LAN, press and hold the RESUME/CANCEL button, then release the button when the POWER lamp flashes white 10 times.
ANSWER. This error indicates that the fuser unit is not properly installed to the printer.
– The printer driver may not be installed correctly. Uninstall and re-install the printer driver. – Make sure that there is a direct connection between the printer and USB port of the computer. Reboot the computer with the printer`s USB cable unattached and reconnect the cable once the computer has restarted.
Instructions to change the machine back to its default settings. Press the <Menu> button repeatedly to display [DEVICE SETTINGS]. Press the left or right arrow to select [RESTORE DEFAULT], then press the <OK> button.
Check cables or wireless connection

Make sure that the printer`s USB cable is properly connected from the printer to your PC. If your USB isn`t recognized, see Automatically diagnose and fix Windows USB problems. Check the wireless connection (for wireless printers).

Check all cable connections (including the power cord) on the printer side. If the printer does have power and you`ve properly connected the communication cable, but the printer is still not recognized, try switching to a different USB port on the PC.
That is the error code for a power supply failure or the printer not receiving enough power to heat the fusilier to print. This can be due to an power outage or not enough electricity flowing into the machine.
RESET THE PRINTER

Switch the printer on and unplug the cable completely, both the USB connection on the device and the plug to the power socket. Wait for at least a minute. c. Reconnect the cable and plug it to the power source.

Simply plug the USB cable from your printer into an available USB port on your PC, and turn the printer on. On the taskbar, select the Search icon, type Printers in the search bar, and then select Printers & scanners from the search results to open the Printers & scanners system setting.
Open the printer`s web page and Sign in as Administrator. On the General tab select Reset Factory Settings in the menu.
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
Printer error has occurred

If the ink cartridge is empty, replace the ink cartridge. The ink cartidge is defective. Replace the ink cartridge with a new one.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

PRINTER MX 320 CANON ALL IN ONE PRINTER
ANSWER : Probably a worn feed roller. You can try cleaning it with a damp rag as it might just be covered with paper dust.

Read Full Q/A … :
Unknown Printer

Canon MP140 – Disable printer, use scanner only?
ANSWER : Dude, God bless ya. I was crazy trying to find a method to use the MP140 as scanner only. Thank you so much!!!!!

Read Full Q/A … :
Unknown Printer

Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.

Read Full Q/A … :
Unknown Printer

Canon Printer reset tool for MP100 MP400 series
ANSWER : Thanks a million for this. I have just managed to get my MP460 Ink levels reset having tried lots of other sites and failed.

Read Full Q/A … :
Unknown Printer

Canon Pixma Pro 9000 Mark II ink dried in printer head.
ANSWER : This video shows how to remove the heads. Ignore his methods of cleaning them as they are really stupid. Best way to clean the heads is to run hot tap water into the screens and then flip it over and run the hot water on the heads. Repeat a few times until the water runs clear. Then dry it thoroughly with a paper towel and reinstall.

Read Full Q/A … :
Unknown Printer

canon printer error
ANSWER : Here are the procedure to fix Canon smartbase MP730 printer error ##334

Read Full Q/A … :
Unknown Printer

Canon MX922 printer with B200 service code
ANSWER : Try green copy button and red triangle in a circle together while releasing the power button upon restarting printer.

Read Full Q/A … :
Unknown Printer

Canon MG6450 printer stopped brinting black colour
ANSWER : Hi there

Read Full Q/A … :
Unknown Printer