Lexmark Optra S

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Lexmark inks have an approximate shelf life of two years and six months out of packaging. Panasonic has a couple of inkjet printers that use pigment-based ink. Like other ink cartridges, Panasonic ink has a two-year shelf life and will last approximately six months when in use.
Press the tiny reset button located beside the chip and hold for 10 seconds. Depending on the brand and model of the cartridge, you may not need to hold the button for 10 seconds, but it won`t harm the cartridge so do it anyway just to be safe. Done.
It is usually situated above the metal contacts, right in the center. Please note that the button is very small and almost unnoticeable, so don`t miss it! Use the end of a paper clip to press the button, hold it for about 10 minutes, and voila — you have just reset an Epson ink cartridge with a paper clip like a pro!
If you disable your printer`s memory chip from collecting your printer usage information, you can continue using your printer even if the toner or ink is finished. So you want to inspect your printer`s ink level at interval by removing it to avoid your ink running out!
If your printer is turned on, disconnect the power cord from the printer. Keep the power plug unplugged for 60 seconds, reconnect the power cord to the wall, and turn on the printer. If the error persists, remove the cartridge from the printer, clean the cartridge contacts with a cloth, and reinstall the cartridges.
What Are Toner Cartridges With No Chips? If a toner cartridge lacks a chip, it just means that the cartridge will be unable to communicate with the rest of the printer directly. Generally speaking, only third-party manufacturers make toner cartridges that lack a sensor chip.
Lexmark devices are intentionally designed to last seven years or more.
The shelf life for an original printer cartridge is 24 months and the shelf life for a compatible cartridge is 36 months. Over time, ink dries out and settles inside the cartridge, which can cause your printer to clog.
Cartridges sealed in the original packaging and stored in a cool, dry place should last up to two years. However the cartridges must be sufficiently protected while in storage, because even a small pin-prick in the packaging will break the seal and the ink will start to dry out.
If you don`t, the printer will stop working. But users can empty and reuse the maintenance cartridge, making a new cartridge unnecessary. The problem is that the cartridge has a built-in “counter” chip, which will tell the printer that the cartridge is full — even if the user emptied it.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

info on refilling lexmark 16 cartridges?
ANSWER : Our proven track record includes 20 million cartridges sold since 2004, saving $180 million for our customers who would have otherwise bought new cartridges. Unlike many discount cartridge resellers, Inkplicity is a manufacturer, instead of only a distributor mail order firm. By eliminating the wholesaler and maintaining complete control of our cartridges from product design and development to your doorstep, Inkplicity continuously delivers extraordinary savings and quality to you. For more info -Refilled Cartridges

Read Full Q/A … :

Lexmark Optra S

Lexmark Reset ink cartridge
ANSWER : Lexmark X7170Cartridge #33 – 18C0033 On front of the Cartridge, where all the contacts are,mine has a small white label with a barcode printed it. I ordered re-filled cartridges and noticed they put what looks like black tape (feels like duct tape) over the white barcode. So I removed the black tape from an empty cartridge, tried it on a new re-filled cartridge and so far, it seems to work.

Read Full Q/A … :

Lexmark Optra S

Expired Ink Cartridges – Any way to move paper with old cartridges?
ANSWER : You could try disconnecting the printer from the computer. Then change the date on the panel to prior to the expiration date. That should fool it.

Read Full Q/A … :

Lexmark Optra S

Lexmark X466 empty tray
ANSWER : The “Load Tray 1 with A4 paper” means the printer is looking for A4 size paper in Tray 1 and that is not what it is detecting. You need to make sure that the paper size that is in the tray matches what the printer is expecting so it understands that it should be looking for a specific size of paper. If you are printing on regular Letter size paper – set the printer tray to Letter instead of A4 and message should go away.

Read Full Q/A … :

Lexmark Optra S

Lexmark Printer Problems
ANSWER : lexmark printers can be fixed . just follow the steps . uninstall the printer and drivers and install the printer driver and setup again from lexmark and than make sure you internet password and you are all set to go for more visit http://lexmark.technical-care.com/ and i hope this will help you . thanks

Read Full Q/A … :

Lexmark Optra S

Restore settings Lexmark x466
ANSWER : Try this:

Read Full Q/A … :

Lexmark Optra S

Lexmark Using Inkjet Cartridge Chips AND Spyware?
ANSWER : In binary possibilities trading depends on simply how much you know the techniques and what broker you are working! I for myself leafing through lots of tactics but the best strategies came with the publication http://bestoptionstrategies.net guide to use. Broblemy with brokers is not uncommon, and they should get established only. It had been there that obtained tested. Thank you for your interest, I really hope to simply help in your problem)))

Read Full Q/A … :

Lexmark Optra S

Lexmark paper feed problems
ANSWER : On my X204n Lexmark laser printer, it was doing the same thing you described – basically sounded like it was trying to pick up the paper from the tray and then failing after several seconds. When you’d open the paper tray, the paper looked like it had been partially taken up with some black scuff marks on the paper that lined up with the rollers that take up the paper. I inspected the rollers and although they looked a bit smooth and worn, didn’t seem like they should be a problem. However, this particular model has just a rubber tire almost like a car tire – the rubber can come off the hard plastic wheel on the inner portion. So I popped off the two rubber “tires”, turned them inside out and put them back on. When turned inside out, the rubber looked nice and … rubbery and had a lot more grippy feeling to them. The very first printing attempt after that and the paper sucked up perfectly with no problems. I think the problem is solved! So if you have similar “tires” that take up the paper, try flipping them and see if it works for you too.

Read Full Q/A … :

Lexmark Optra S