Error E020-060 was solved by changing the new memory chip with an old one. It worked very well.
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
#099. The job was cancelled. Perform the job again. An error occurred because the main power switch was turned OFF while executing a job.
If you encounter the E02 or E03 error, this is because the printer cable is too tight and the printer door cannot be properly closed.
“Error 99” means your robot was not able to orient itself based on known landmarks, such as walls or furniture.
The default user name for the administrator is “Administrator” and the default password is “7654321”.
The hard reset helps you restore your Canon printer back to its default factory configuration. Here`s how to perform a hard reset: Step 1: Press and hold the “Stop” button on your Canon printer until you hear the alarm ringing. Step 2: Release the “Start” button only after the alarm flashes or rings at least 19 times.
Disconnect the printer cable from the printer, turn the printer off, and then unplug the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact your Canon service representative.
Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you`re trying to print. The loading bay for your paper might have become lodged with paper or you`re using the wrong type of paper.
The machine is unable to drain the water away Should the error code E3 appears it is warning that the machine is not draining. You can easily fix this problem by removing any blockages from the drain pump situated at the front of the machine for easy access.
Error Codes
The led screen on the printer will flash a letter E and will then be followed by two numbers: E02 – The printer is out of paper or will not feed. E03 – The printer lid is open, or there is a paper jam. E04 – The printer cartridge is not installed properly.
The customer`s card issuer cannot be found for routing. This response code is often returned when the customer is using a test credit card number. The customer should attempt to process this transaction again.
Issuer or Switch Inoperative Error Code
If you find yourself in a situation where you see error code 91, it means issuer or switch inoperative. In simpler terms, this means that the card issuer was unavailable. For some reason, the credit card terminal you`re using could not contact the issuing bank.
Users can log in using the control panel of the machine or from the Remote UI. The default user name for the Administrator of Local Device Authentication is `Administrator` and the default password is `7654321` (case sensitive).
For security reasons, you cannot log in to the Remote UI using the default password (7654321) for the Administrator user.
For example, if the aperture assembly on your lens is broken and needs to be replaced, the camera will tell your lens to change the aperture, the lens can`t because the aperture assembly is not functioning, and so the camera will not have any confirmation that the lens obeyed it`s command. The result? Error 99.
For example, if the aperture assembly on your lens is broken and needs to be replaced, the camera will tell your lens to change the aperture, the lens can`t because the aperture assembly is not functioning, and so the camera will not have any confirmation that the lens obeyed it`s command. The result? Error 99.
#099. Printing, sending, or receiving was canceled. When you cancel an operation, this error code is displayed, but this is not abnormal. Print, send, or receive documents again as necessary.