Read this for solutions http://www.mytechtime.com/2011/10/canon-error-5100-how-to-fix.html
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Solution. There are several reasons for Error 5100 to appear, including a paper jam, an improperly seated ink tank, and more. Encoder (Timing) Strip on the printer needs cleaning. Manual cleaning can be done on some models.
Check the following: Make sure print head (cartridge) holder motion is not impeded by stabilizer, jammed paper, etc. Remove any impediment. Make sure the print heads (cartridges) are properly installed.
Make sure the ink cartridges are properly installed. Push up the ink cartridge lock lever until it clicks. Make sure that the ink cartridge holder motion is not impeded by stabilizer, jammed paper, etc. Remove any impediment.
Error 5100 is a general error from the Microsoft . NET installer that can have a number of meanings: . NET has already been installed and target computer needs to be rebooted.
Check the following: Make sure print head (cartridge) holder motion is not impeded by stabilizer, jammed paper, etc. Remove any impediment. Make sure the print heads (cartridges) are properly installed.
Check the following: Make sure print head holder motion is not impeded by protective material and tape for securing the print head holder, jammed paper, etc. Remove any impediment.
Check the following: Make sure print head holder motion is not impeded by tapes for securing the print head holderduring transportation, jammed paper, etc. Remove any impediment. Make sure the ink tanks are properly installed.
The code 5100 suggests that the PC doesn`t meet the requirements to install the . NET Framework. Maybe there`s not enough space in your disk or your Windows version is too old. Windows 7 SP1 at minimum is required.
Error code 0x00000000 is another of those Microsoft Store issues commonly reported on support forums. This error occurs when users try to install new UWP apps or update ones already installed. The error 0x00000000 messages say, “Something unexpected happened” or “Try that again.”
What ink cartridges does the Canon Pixma TS5100 take? The Pixma TS5100 accepts Canon PG-540 and CL-541 ink cartridges in standard and XL sizes.
Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you`re trying to print. The loading bay for your paper might have become lodged with paper or you`re using the wrong type of paper.
Check the following: Make sure print head (cartridge) holder motion is not impeded by stabilizer, jammed paper, etc. Remove any impediment. Make sure the print heads (cartridges) are properly installed.
If your printer displays a displays a B200 or related (B201, B202, etc.) error, this means that the print head built into one or both of the ink cartridges has overheated. You can attempt to replace the ink cartridges in your printer to resolve this.
Restoring Network Settings to Factory Default
Press and hold the [RESUME/CANCEL ] button until the POWER lamp flashes 9 times. 2. Release the [RESUME/CANCEL ] button. The network settings are initialised.
An ink tank(s) is not seated properly.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
Check the following: Make sure FINE cartridge holder motion is not impeded by stabilizer, jammed paper, etc. Remove any impediment. Make sure the FINE cartridges are properly installed.
The Canon Printer error code 5011 is a common error and you can clear this error message within a few minutes. This error code appears when the ink cartridge holder is stuck, or a piece of paper is stuck on the cartridge holder. It may also happen due to a misplaced cartridge.
The P02 error occurs when the printer cable is too short to reach the left side of the printer, where the ink tank is located. To resolve this error, you need to move the cable to the right, making it shorter on the left. This will allow the printer to properly detect the ink tank and eliminate the P02 error.
Support Code=5500, 5501
Ink tank has not been properly recognized. Contact the service center.
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.
Using the reset feature is a common need to clear a jam, clear a queue or to work through a different set of troubleshooting issues. Not all models have a reset button, but they all have a process to reset the printer.
Go to Control Panel > Programs > Turn Windows features on or off, verify if . NET Framework 3.5 checkbox is selected and then proceed with the software installation. If the error persits, we will have to force the installation with the Windows command prompt (CMD).
Detect .NET Framework 4.5 and later versions. The version of .NET Framework (4.5 and later) installed on a machine is listed in the registry at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full. If the Full subkey is missing, then .NET Framework 4.5 or above isn`t installed.