Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Laser Phaser Printers

They generate static electricity which draws toner onto the page, creating highly detailed text and images. Every single pixel gets the same amount of light, providing a crisp finish.

It means there is an incorrect parameter in the paper size. This happens mostly with the wrong print driver in use, or when an application overrides the driver. So make sure it is the right print driver, and make sure that the Application is not set to an odd size.
This error is displayed because the right side door is open. Close the door.
024-747 The specified combination of parameters (stored file size, paper size, paper tray, duplex command, output tray) cannot be executed or continued. Load Paper in Trays 1-4. Make sure that the paper size, paper tray, duplex settings, and output tray settings are correct for the job.
Turn the printer off, wait 20 seconds and turn it back on again. Both USB and Wi-Fi connected printers require the correct and current printer driver is installed on the computer you`re printing from. Go to Xerox support, search for your printer and download the latest driver for your printer model.
Printer status spooling essentially means another document is printing, and yours is waiting for its place in the queue. The reason for this is that printers don`t have anywhere near as much memory as computers, and need an intermediary program to conduct and wave the print jobs to home plate.
The printer does not support the personalization being requested for the card. The card will be canceled.
The HTTP 100 Continue informational status response code indicates that everything so far is OK and that the client should continue with the request or ignore it if it is already finished.
Fault Code 099-395: Fuser Motor Current Failure.
When there is a Error or Warning message, press the [Information] button on the Control Panel to obtain the associated Fault Code.
Verify the user has write access to the storage destination on the SMB server. For details, refer to Configure Network Authentication for Security. Verify a firewall is not blocking communication ports.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
Phasers filters signals by creating a series of peaks and splits the sound into at least two paths, whereas flanger doubles your input signal and plays both back together.
Phaser is a popular effect for guitars, synths, and more, as it can add character, texture, and sweeping and whooshing to your channels.
Phasers filters signals by creating a series of peaks and splits the sound into at least two paths, whereas flanger doubles your input signal and plays both back together.
Thermal printers can print on various materials such as paper, plastic, nylon, polyester, vinyl, and other composite materials. These printers are great for businesses that need to print labels for products that will be exposed to sunlight or other elements that can cause the label to fade.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

xerox phaser 6100
ANSWER : This post is from nearly a decade ago, so don’t know if the thread is still active. I have this printer in my rural WV classroom and am searching for a fuser unit for the Phaser 6100. Anybody know where I can still purchase one ?

Read Full Q/A … :
Unknown Printer

How to reset page counter on Xerox Phaser 3160N
ANSWER : http://apexmic.info/how-to-reset-chip-xerox-phaser-3160.html

Read Full Q/A … :
Unknown Printer

Xerox Phaser 7750 – FUSER delima
ANSWER : Thanks! On my printer, one of the magnets did dislodge and was stuck on the other side. I finally figured out what it was from your advice. The magnet was not broken and popped right back in to place. Keeping my fingers crossed that was the only issue.

Read Full Q/A … :
Unknown Printer

Xerox 7760 Wrong paper size error when trying to print to A4
ANSWER : At first you could try to print using the Multifunction/Bypass Tray on the left side of your printer.

Read Full Q/A … :
Unknown Printer

Xerox Phaser 3250 solid red light with no apparent reason
ANSWER : I found the problem to be a fuser. For $150 you can fix this issue. Cheaper to buy a new unit.

Read Full Q/A … :
Unknown Printer

error code :91,720,00:60960
ANSWER : Xerox 8570 Error Code 91720

Read Full Q/A … :
Unknown Printer

Printhead Tilt Fault Error, Xerox 8870 Colorqube
ANSWER : The 8870 I had which had a 97,721.00 error ended up being a split\cracked gear on the shaft that engages the maintenance kit, the :9875 is the printer page count. You can try to rehome the process drive but I would check and see if there is a split gear (where it mounts on shaft) first because the shaft will spin but the gear won’t engage if it’s cracked or split so it throws an error.

Read Full Q/A … :
Unknown Printer

Phaser Jams every time code: 0,006.74
ANSWER : http://www.support.xerox.com/support/phaser-8560mfp/support/enus.html

Read Full Q/A … :
Unknown Printer