HP Color LaserJet 2500
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
There`s a trick to printing in color: You must select the color printer in the print menu AND make sure the document is set to print in color under “Printer Properties.” (Most of the time, the color printers default to “color” as the output).
Printing on 10% = 240 pages. Printing on 20% = 120 pages. Printing on 40% = 60 pages. Printing on 80% = 30 pages.
A typical ink cartridge will yield 250 to 300 pages depending on the color density of the prints. The yield of a typical toner cartridge in a laser printer is between 2,500 and 3,000 pages. Some larger laser printers can even have toners that will yield up to 30,000 pages!
Print speed and capacity
They can print up to 20 to 25 pages per minute (ppm). A workgroup printer is needed if an average of 1,000 pages per week is needed.
Click Start, point to Settings, and the click Printers. Right-click the appropriate printer, and then click Properties. Click the Paper tab, and then click the paper size you want to use in the Paper Size box.
Open Start > Settings > Devices > Printers & scanners.
Press your printer`s Setup button. Go to System Setup. Choose Print Quality and then Calibrate Color. Choose Calibrate Now and press OK.
HP EasyColor scans documents and automatically adjusts photographic images in . JPEG or . PNG format. Rather than dividing an image into several pieces, HP EasyColor technology enhances the entire image at one time, which results in improved color consistency, sharper details, and faster printing.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Clean the printheads: Sometimes the issue why you are unable to print in color is because our printheads are clogged with ink. Clean the printheads and then print a document to check if color printing works. Some printers also have in-built programs that can clean themselves so remember to check for that.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
HP Color Laserjet 3800 problem when printing color
ANSWER : Do a cold reset
Read Full Q/A … :
HP Color LaserJet 2500
My 2550n Color LaserJet does not want to print in color
ANSWER : That model had issues with the carousel solenoid sticking. That might explain why it works after you let it sit for 10 minutes. The solenoid gets hotter with use which causes the deteriorated foam on it to become sticky and hold down the release plate instead of letting it go. This allows the carousel to spin when it is supposed to stop for each color. The solenoid is located on the right side of the printer. If you open the lid, it is just behind the opening at the top right. You need to remove the top of the printer and scrape off the goo on top of the solenoid body. I put a piece of thin sticky backed felt to replace it. Other people use electrical tape.
Read Full Q/A … :
HP Color LaserJet 2500
HP Color Laserjet 2840 spitting out blanks
ANSWER : Moe- You are the man!
Read Full Q/A … :
HP Color LaserJet 2500
Reset HP Color Laserjet 4700 transfer kit
ANSWER : How about the situation when resistor does not reset the transfer belt count and even new transfer belt out of the box is not doing it. Do you have any idea how to solve this problem? I did reset transfer belts and fusing units on several HL 4700 printers with no problem but also I came across few which were not possible to reset even with oryginal parts.
Read Full Q/A … :
HP Color LaserJet 2500
HP Color LaserJet 4550 Streaking
ANSWER : hello,
Read Full Q/A … :
HP Color LaserJet 2500
HP Color LaserJet 4700
ANSWER : Saludos Amigo le Que le Pasa a tu Impresora Es Que Tienes rota El Sistema de sierre de la puerta con el Cierre de los tóner es Por Esa Razon Que No Cierra los tóner Si Quieres repararla Ponte en Contacto Madrid Seis Cinco Cinco Tres Cuarenta dos cuarenta y uno Reparación en el Momento saludos
Read Full Q/A … :
HP Color LaserJet 2500
HP Color Laserjet blank pages – only jetdirect page
ANSWER : What about the engine test? To do that, drop down the front tray. Feel around on the left side at the top and you’ll feel a little plastic dongle. If you lift up on that it will initiate an engine test page. That will be a page containing lines of each color.
Read Full Q/A … :
HP Color LaserJet 2500
HELP! HP Color Laserjet 5500dn (formatter prob??)
ANSWER : Italiano:
Read Full Q/A … :
HP Color LaserJet 2500