HP Color LaserJet 4700
Experienced technical support provide their insights in answering this question :
How about the situation when resistor does not reset the transfer belt count and even new transfer belt out of the box is not doing it. Do you have any idea how to solve this problem? I did reset transfer belts and fusing units on several HL 4700 printers with no problem but also I came across few which were not possible to reset even with oryginal parts.
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
4700 Fuser Reset Procedure To clear the Replace Fuser message on an HP 4700 reset, remove old fuser with power on and install replacement fuser. Allow printer to return to Ready state. There are no user resets or fuser count resets to perform on this printer.
Now you can reset the New Transfer Kit setting … At the control Panel, press the Home button. Open the “Administration” menu, then choose “Manage Supplies”. Select the “Rest Supplies” option, and then choose “New Transfer Kit.” Use the Down Arrow button to highlight the word “Yes”, and then press Ok to select it.
Turn the printer on, and immediately put your fingers on the return (u-turn) button, home button, and one in the lower right corner of the screen (next to the question mark button). Wait until the screen said Permanent Storage Init. You`re good after that, it will reset. Thank you…
Touchscreen control panels: From the Home screen on the printer control panel, touch the Setup button. Open the Service menu. Select the Restore Defaults option, and then press or touch the OK button. The printer automatically restarts.
Regardless of which you choose, all of your applications will be deleted and any settings will be returned to their default. 9. If you choose “Remove everything,” you will also have to decide whether you want a completely clean drive or if you would like to keep the laptop and you aren`t planning on giving it away.
From the control panel go to : setup menu>printer maintenance and then select either cold reset or factory reset. cold reset: Resets printer to out-of-box condition, startup questions like self or IT managed will appear are initial prompts again.
To Access the Factory Reset: On the Control Panel, touch the Settings Gear. The product will give you a warning about resetting all passwords (ews and otherwise), then restart automatically. When it reboots, it will be back to factory settings.
Go to Settings menu | Printer Maintenance | Restore . Press Restore Factory Defaults. Follow on-screen instructions.
Go to Settings menu | Printer Maintenance | Restore . Press Restore Factory Defaults. Follow on-screen instructions.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Reset HP Color Laserjet 4700 transfer kit
ANSWER : How about the situation when resistor does not reset the transfer belt count and even new transfer belt out of the box is not doing it. Do you have any idea how to solve this problem? I did reset transfer belts and fusing units on several HL 4700 printers with no problem but also I came across few which were not possible to reset even with oryginal parts.
Read Full Q/A … :
HP Color LaserJet 4700
Transfer belt doesn't reset the counter HP 4700
ANSWER : It is not possible to reset the counter of HP CLJ 4700. for further please check http://www.tinylinks.co/xyjX
Read Full Q/A … :
HP Color LaserJet 4700
HP Color LaserJet 4700
ANSWER : Saludos Amigo le Que le Pasa a tu Impresora Es Que Tienes rota El Sistema de sierre de la puerta con el Cierre de los tóner es Por Esa Razon Que No Cierra los tóner Si Quieres repararla Ponte en Contacto Madrid Seis Cinco Cinco Tres Cuarenta dos cuarenta y uno Reparación en el Momento saludos
Read Full Q/A … :
HP Color LaserJet 4700
HP 4700 Color alignment
ANSWER : Thanks much, this method worked for me.
Read Full Q/A … :
HP Color LaserJet 4700
HP Color Laserjet 3800 problem when printing color
ANSWER : Do a cold reset
Read Full Q/A … :
HP Color LaserJet 4700
HELP! HP Color Laserjet 5500dn (formatter prob??)
ANSWER : Italiano:
Read Full Q/A … :
HP Color LaserJet 4700
HP Color Laserjet blank pages – only jetdirect page
ANSWER : What about the engine test? To do that, drop down the front tray. Feel around on the left side at the top and you’ll feel a little plastic dongle. If you lift up on that it will initiate an engine test page. That will be a page containing lines of each color.
Read Full Q/A … :
HP Color LaserJet 4700
HP Color LaserJet 4550 Streaking
ANSWER : hello,
Read Full Q/A … :
HP Color LaserJet 4700