Unknown Printer
Experienced technical support provide their insights in answering this question :
when i run the service tool then open a new window i click on main button then this window is not responding (this window is hang) no response from this service tool plz tell me what i do.
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
When you see P07 error code on your Canon printer, then you should know that it`s due to ink overflow issues. However, there is nothing to worry because your printer already has a system which you can use to clean the excess ink.
Canon MP270 – Error P07 / Error 5B00 / Error E08
This error is shown when the waste ink absorber is full in the printer. Every time the printer runs a head cleaning routine, it flushes some ink through the print heads to keep them clean and clear. That ink runs in to the waste ink absorber.
Canon MP280 – Error P07 / Error 5B00 / Error E08
This error is shown when the waste ink absorber is full in the printer. Every time the printer runs a head cleaning routine, it flushes some ink through the print heads to keep them clean and clear. That ink runs in to the waste ink absorber.
Canon MG3150 – Error P07 / Error 5B00 / Error E08
This error is shown when the waste ink absorber is full in the printer. Every time the printer runs a head cleaning routine, it flushes some ink through the print heads to keep them clean and clear. That ink runs in to the waste ink absorber.
Error P, 0, 3 or 6000 Appears
Paper may have jammed in the printer. Click here for instructions to remove a paper jam. There is an obstruction in the printer. Click here for instructions to check for an obstruction and remove it. The printer`s timing strip may be dirty.
The P02 error occurs when the printer cable is too short to reach the left side of the printer, where the ink tank is located. To resolve this error, you need to move the cable to the right, making it shorter on the left.
Error P07 – The waste ink absorber is full.
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings. In the Reset settings menu, select the desired area you want to set back to the factory defaults.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
MP287 Problems witch code P07-canon printer
ANSWER : when i run the service tool then open a new window i click on main button then this window is not responding (this window is hang) no response from this service tool plz tell me what i do.
Can printer cause WiFi problems?
ANSWER : It really doesn’t sound possible. Have you tried disconnecting the printer and seeing if that restores your wifi? I’ve had problems with my Internet service provider before. I found that I knew more than their techs did. The last problem I had was due to the router. They gave me a new one, but it had the same issues. I went out and bought a decent one and that fixed my problem.
epson printer problems
ANSWER : My Printer Has A Internal Erro
newly installed printer…can scan but cant be set as a default printer???
ANSWER : ITS AN EPSON L210…
Overcome the problem of the printer repair
ANSWER : The English is so bad, there is no way anyone can help.
PRINTER MX 320 CANON ALL IN ONE PRINTER
ANSWER : Probably a worn feed roller. You can try cleaning it with a damp rag as it might just be covered with paper dust.
Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.
Lexmark Printer Problems
ANSWER : just put them in a dark room together. they’ll make out eventually.