HP DesignJet 30
Experienced technical support provide their insights in answering this question :
How do I hold down the # and the 6 at the same time? The “#” requires holding the shift key and the “6” doesn’t. Maybe you all have a different type of keyboard. My printer is HP 1220C.
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Master Reset: Unplug the printer, then pressing the help and ok buttons simultaneously plug it back in.
If your printer is turned on, disconnect the power cord from the printer. Keep the power plug unplugged for 60 seconds, reconnect the power cord to the wall, and turn on the printer. If the error persists, remove the cartridge from the printer, clean the cartridge contacts with a cloth, and reinstall the cartridges.
Answer. On HP printers, a “cold reset” causes the printer to return to its factory default settings, which among other things, causes it to try and retrieve its configuration information from a BOOTP server.
Turn the printer off then back on. If the issue persists, turn the printer off, unplug the power cord and then wait at least three minutes before plugging the power cord back in and turning the printer back on. If the issue persists, ensure the product is running the latest firmware available from HP.com.
Power down the printer and then unplug the power cord from the printer and the wall. Wait for a minute, then plug the printer back in. The printer will reset and turn on.
Make sure the printer is on and connected to your computer. Go to HP Software and Driver Downloads, and then enter your printer model. Select Firmware from the list of drivers, click Download next to the update, and then follow the instructions.
To remove all data from your phone, you can reset your phone to factory settings. Factory resets are also called “formatting” or “hard resets.”
Turn on the laptop and immediately press the F11 key repeatedly until System Recovery starts. On the Choose an option screen, click “Troubleshoot.” Click “Reset this PC.”
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
HP C6180 Hard Reset procedure
ANSWER : How do I hold down the # and the 6 at the same time? The “#” requires holding the shift key and the “6” doesn’t. Maybe you all have a different type of keyboard. My printer is HP 1220C.
Read Full Q/A … :
HP DesignJet 30
Reset HP Color Laserjet 4700 transfer kit
ANSWER : How about the situation when resistor does not reset the transfer belt count and even new transfer belt out of the box is not doing it. Do you have any idea how to solve this problem? I did reset transfer belts and fusing units on several HL 4700 printers with no problem but also I came across few which were not possible to reset even with oryginal parts.
Read Full Q/A … :
HP DesignJet 30
Reseting the ink levels for hp c7280,
ANSWER : I held the # and 6 down long enough to start a complete re-set of the printer But the Black ink level still shows as depleted when it is actually still half full.
Read Full Q/A … :
HP DesignJet 30
HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr
Read Full Q/A … :
HP DesignJet 30
HP 4101MFP Hard Drive Question
ANSWER : To initialize: turn off – Press start and hold down while turning on, release after all three light light, you should see initialize disk hit check, and allow to boot.
Read Full Q/A … :
HP DesignJet 30
Resetting of chip for hp toner Q6000A
ANSWER : HP Color Laser Jet 1600 – Thanks for all the above information. Even though the 1600 is a different printer, I followed the above: “…go to “System Configuration”; then to “Print Quality”; I then get a choice of “Replace Supplies” and then “Overide Out”…” Selecting “Overide Out” got my 1600 back to printing, although I did have do perform the steps TWICE before it seemed to take affect. Not sure what was going on, but I’m happy that people put the information out there for the rest of us to have.
Read Full Q/A … :
HP DesignJet 30
oki c511 drum reset, toner reset, turkey chip reset
ANSWER : If you switch off toner control, you should keep an eye on your prints, and we aware of ink quality, so filling colours as they’re emptying. Nevertheless, it’s an small disturb for the a,ount of money you’re saving ¿isn’t it?
Read Full Q/A … :
HP DesignJet 30
HP Photosmart C6180 Ink System Failure
ANSWER : This has been a life saver for us. Thank you very much for your help.
Read Full Q/A … :
HP DesignJet 30