Unknown Printer

Experienced technical support provide their insights in answering this question :
If you switch off toner control, you should keep an eye on your prints, and we aware of ink quality, so filling colours as they’re emptying. Nevertheless, it’s an small disturb for the a,ount of money you’re saving ¿isn’t it?

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

You stick the chip on to the drum when the printer is turned off, then you turn on the power, wait a few minutes for the printer to calibrate and it`s ready! Your drum will be reset.
To do this: 1 Press and release SEL (1) to take the printer off-line. The SEL light goes out. 2 Press and hold SHIFT (2), then press the RESET/CHARACTER PITCH key.
“DRUM LIFE” or “REPLACE DRUM” is a rough indicator that the image drum cartridge has reached the end of its life. If there are no problems with print quality even if this message appears, continue to use until there is no toner left. When out of toner, replace the image drum cartridge and toner cartridge together.
You can set when to display the “Image Drum Near Life” message. Press [Device Settings] > [Admin Setup] > [User Install] > [Drum Near Life Timing] on the touch panel to change the setting. Available values are from 500 to 3,000 (in 500 increments).
Press the tiny reset button located beside the chip and hold for 10 seconds. Depending on the brand and model of the cartridge, you may not need to hold the button for 10 seconds, but it won`t harm the cartridge so do it anyway just to be safe. Done.
What is the drum unit? The drum unit transfers the toner to the paper. The laser printer puts the toner on the roller called “The photosensitive drum” inside the drum unit, and then prints letters and images by fixing toner to the paper by heat and pressure.
You can set when to display the “Image Drum Near Life” message. Press [Device Settings] > [Admin Setup] > [User Install] > [Drum Near Life Timing] on the touch panel to change the setting. Available values are from 500 to 3,000 (in 500 increments).
Power down the printer and then unplug the power cord from the printer and the wall. Wait for a minute, then plug the printer back in. The printer will reset and turn on.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

oki c511 drum reset, toner reset, turkey chip reset
ANSWER : If you switch off toner control, you should keep an eye on your prints, and we aware of ink quality, so filling colours as they’re emptying. Nevertheless, it’s an small disturb for the a,ount of money you’re saving ¿isn’t it?

Read Full Q/A … :
Unknown Printer

reset toners and image drum life
ANSWER : They both have chips that need to be replaced. There are videos on YouTube that show how to refill the toners and how to replace the chips.

Read Full Q/A … :
Unknown Printer

Drum reset
ANSWER : This forum thread covers the reset procedure

Read Full Q/A … :
Unknown Printer

RESET OKIDATA TONER DRUM
ANSWER : Hi guys

Read Full Q/A … :
Unknown Printer

RESET OKIDATA TONER DRUM
ANSWER : HI there, oki image drums contain a fuse. You can reset them if they are working/printing ok by replacing the fuse. Hope this helps. The fuse is located inside the unit so is a bit fiddly.

Read Full Q/A … :
Unknown Printer

Resetting of chip for hp toner Q6000A
ANSWER : HP Color Laser Jet 1600 – Thanks for all the above information. Even though the 1600 is a different printer, I followed the above: “…go to “System Configuration”; then to “Print Quality”; I then get a choice of “Replace Supplies” and then “Overide Out”…” Selecting “Overide Out” got my 1600 back to printing, although I did have do perform the steps TWICE before it seemed to take affect. Not sure what was going on, but I’m happy that people put the information out there for the rest of us to have.

Read Full Q/A … :
Unknown Printer

reset counter without chips for samung SL-M2070 W
ANSWER : http://fix-bay.com/fix-proshivka-sl-m2070-sl-m2070w-samsung-xpress-skachat-v-08-16-20/

Read Full Q/A … :
Unknown Printer

image drum message
ANSWER : You don’t have to replace it until it wears enough to affect the print quality. You’ll get spots or stripes. Here you go on a free reset. If you read the thread, someone says the procedure also works on your model. http://www.fixyourownprinter.com/posts/33634

Read Full Q/A … :
Unknown Printer