Brand new MX922. Printed a couple of pics and now the 6000 error. Can’t see any obstruction. Could you provide the manual for dismantling the unit further? Or pointers for getting further into the box than just looking through the little folding inkwell door?
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
What to Do. Turn off the machine and unplug it. Plug in the machine again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
E, 1, 6 (LED display)
The ink has run out. Replace the ink cartridge and close the paper output cover.
Solution. There are several reasons for Error 6000 to appear, including a paper jam, an improperly seated ink tank, and more. Paper is jammed or there is an object inside the printer. The printer needs to be reset.
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.
To clear the error manually push the UP, DOWN and PUMP buttons simultaneously, ensure the display clears before showing the temperature or error code again. If the display does not clear the reset was not executed correctly.
An E5 or E6 error occurs when the scanner or printer is in an error state. Reset the printer. With the printer on, disconnect the power cord from the printer. Unplug the power cord from the power source.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
Support Code 6900 means that there is a problem with the wireless network adapter in the printer and that service maybe required.
What is QuickBooks Error -6000 -80 and how does it occur? This error is a common QuickBooks data file error that occurs when the software is unable to open a company file. It can occur due to various reasons such as damaged or corrupt company files, incorrect file permission settings, or network issues.
The reset key is a single use key and once used cannot be used again. All EPSON printers have inbuilt counters that count up the number of pages a printer produces, the number of head cleans executed and various other attributes. Once a critical level is reached the printer will enter its service mode.
Reset. Resetting the printer stops printing and clears the current print job received from the active interface. You may want to reset the printer when there is a problem with the print job itself and the printer cannot print successfully.
1. On the printer display home screen, select the “set up” button (it looks like a gear). 2. Select “settings” > “device settings” > “reset settings” > “reset all” > “OK” and then “Yes.”
Restart your computer – this often will recover any lost connections with wireless devices. Power off and on the printer, and even the access point or wireless router your printer connects to. Check your printer configuration – you may not be assigned to the correct port for the printer.
This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
E, 1, 6. Ink has run out. Replace the ink cartridge and close the Scanning Unit (Cover). If printing is in progress and you want to continue printing, press the machine`s Stop (Reset) button for at least 5 seconds with the ink cartridge installed.
While sending MT-SMS, I found error code 6 which means, the subscriber didn`t respond to the MSC paging and MSC reverted with error code “absentSubscriberSM”. This might be due to low signal strength, or device is in an idle state or powered off.
An application has requested more GPU memory than is available in the system. That application will now be closed.
However, there may be times when your Canon printer is not working optimally for whatever reason. At such times, you should try doing a Canon printer reset. This can resolve technical issues such as your printer being slow, printing blank pages, or being unresponsive.
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
Clean Fixing Assembly (Reduce Paper Back Side Stain)
Select <Adjustment/Maintenance> <Maintenance>. Select <Clean Fixing Assembly (Reduce Paper Back Side Stain)>. Check that the size and type of paper displayed on the screen is loaded in the machine, and select <OK>. Select <Start>.
I recommend performing a reset of the printer. While the printer is on, unplug the power cord from the printer and let it sit for 60 seconds. While the power is off, press the power button 5 times. After 60 seconds plug the power cord back in and power on the printer.
What to Do. Turn off printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, service is required.
If something is in front of the paper feed tray, the paper feed tray may not open even after you command a print job. As a result, the 6000 error shall occur. In such a case, remove any physical objects that prevent the tray from opening and turn OFF the printer. Then, turn ON the printer and command printing again.
Turn the printer and camera power off, then turn on again. If the error message does not clear, contact a Canon Customer Support center for assistance. Close the cartridge cover. If the error message does not clear, turn the power off and on again.