HP PSC – Printer / Scanner / Copier 2410
Please I need your help.
Experienced technical support provide their insights in answering this question :
Could be ink buildup jamming it. Try squirting Window cleaner around the ramp. That will dissolve the ink.
How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Why the Printer Cartridge won`t Move. A paper jam is usually the reason why an HP printer cartridge gets stuck on the right side. Pushing the paper excessively into the printer, on the other hand, is the most common cause of a paper jam. You should only push the paper until the first resistance.
Get a flat something to use as a pry bar. I would suggest the back of a spoon handle, or a dull table knife. Insert the pry bar between the top of the cartridge and the underside of the carriage slot. Slide it forward and then gently lift the pry bar slightly, just enough to allow the cartridge to be pulled free.
There are a number of reasons why ink is not flowing through the cartridge, despite there being plenty of ink in the cartridge. The most common cause for this is infrequent usage. If your printer is not used on a regular basis, at least once a week, the cartridge can dry up and then become clogged as a result.
If ink is not coming out when you perform printing for the first time, it is possible that ink is not flowing into the printer properly. Make sure each ink tank is filled with ink to its upper limit and perform ink flush. If the problem is not resolved yet, the print head may be damaged.
If your printer won`t print, a print job has stopped unexpectedly, or you received a “carriage jam” error, your printer carriage is likely jammed. These jams occur when the carriage holding the ink cartridges stalls in the printer. Carriage jams sometimes occur after a paper jam.
Improper placement or installation of the print cartridges can cause a carriage stall error condition. Follow these instructions to remove the print cartridges. Make sure the printer is turned on. Open the print cartridge access door, and then wait until the print carriage is idle and silent.
Improper placement or installation of the print cartridges can cause a carriage stall error condition. Follow these instructions to remove the print cartridges. Make sure the printer is turned on. Open the print cartridge access door, and then wait until the print carriage is idle and silent.
Improper placement or installation of the print cartridges can cause a carriage stall error condition. Follow these instructions to remove the print cartridges. Make sure the printer is turned on. Open the print cartridge access door, and then wait until the print carriage is idle and silent.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
After thr carriage stop moving the ramp will not lower to load or unload the ink cartridge.
ANSWER : Could be ink buildup jamming it. Try squirting Window cleaner around the ramp. That will dissolve the ink.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 2410
Expired Ink Cartridges – Any way to move paper with old cartridges?
ANSWER : You could try disconnecting the printer from the computer. Then change the date on the panel to prior to the expiration date. That should fool it.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 2410
cannot recognise new ink cartridge
ANSWER : I followed all the online hints I could find and none worked. So I got to looking at the cartridge ink window and noticed it had a little float inside that was stuck to the bottom. I gently turned it upside down several times to let the float move to the top of the ink tank. It took several try’s but it eventually stayed up about half way. I installed the cartridge again, making sure cartridge clicked in and printer began working.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 2410
ink cartridge leaked
ANSWER : I usually use a spray bottle of window cleaner and a paper towel.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 2410
Why can't I use compatible 220 Ink Cartridges?
ANSWER : All cartridges have tiny chips on the exterior. The chips have to be replaced or reset for the compatibles to work correctly.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 2410
incompatible ink cartridge message
ANSWER : Pretty much nothing else you can do except try another new cartridge. I had 2 identical HP printers once in the shop. One of them didn’t like one of the cartridges. I swapped it over with the other printers cartridge and it was happy. So was the other printer. Swapped the cartridges back and it didn’t like it again. How do you explain that? You don’t.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 2410
run with empty ink cartridge
ANSWER : The only way is to buy a chip resetter and reset the chip on the cartridge. You can find them online for about $5. You just hold it against the cartridge until the light turns green. You do run the risk of damaging the printhead due to overheating because of no ink in it.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 2410
Epson 7880 ink pump sucking ink
ANSWER : Not ink pump, but air pump, to put the ink feed under pressure.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 2410