Unknown Printer

Experienced technical support provide their insights in answering this question :
It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If the ink level is sufficient, but the printer still does not print black ink, you may need to run a cleaning cycle. A cleaning cycle is a process that cleans the printer heads and removes any clogged or dried ink.
If you don`t see a Print on Both Sides pane, then your selected printer doesn`t support duplex printing. Or, the feature is turned off (see Verify that printer features are turned on). Click OK, and then click OK again to print.
A common cause of faded, faint printouts from your inkjet printer is dried ink particles causing a blockage in your printer. The printheads on an ink cartridge can be become blocked if the printer is not used for a period of time, so it is recommended to print a few pages each month to maintain the print quality.
Ink cartridges can dry out over time. If they are sitting in your machine for an extended period, they will eventually dry up and become unusable. The simplest way to combat this problem is by printing more frequently or running regular cleans and ink tests to ensure the nozzles remain clean.
Reverse printing, also known as negative printing, is where only the background is printed. The natural colour of the tape is left exposed to form text and graphics. For example, in the above image (top left), a naturally white packing tape has been blanketed with black ink.
If you place the paper guide in the wrong position or do not align the edges of the paper before you load it, the printed images may be misaligned on every page. * Paper Guide. Position in which image is printed is misaligned because the paper guide is in the wrong position.
Print head alignment corrects the installation positions of the print head and improves deviated colors and lines. This machine supports two head alignment methods: automatic head alignment and manual head alignment.
Single sided printers are ideal for ID cards that are being manually checked and do not require a magnetic stripe to be swiped through a reader. Whereas, if you`re looking to print more complex cards, with information and text spreading onto both sides, a dual-sided printer would be best.
Print on both sides of the paper (Windows)

Open the document, and then click File > Print. Select your printer, and then click Printer Properties, Preferences, or Printer Setup. From the print settings, select the option for a two-sided print job. Menu options vary by printer model.

Click File > Print. In the Printer list, select the printer you want to use. In Settings, choose Print on Both Sides – Flip sheets on long edge or Print on Both Sides – Flip sheets on long edge.
Put the side to be printed on face up with the leading edge (top) of the paper in first. To print on the second side, put the paper face down, with the leading edge (top) of the paper in first. If letterhead paper is used, put it in with the heading face down and in first.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Read Full Q/A … :
Unknown Printer

Prints blank pages, won't print from computer
ANSWER : Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.

Read Full Q/A … :
Unknown Printer

Paper jam in front of print head. HELP URGENT Please
ANSWER : I am 99% sure you don’t have a problem with a sensor. Having no idea what you do in the cleaning process, and not being able to look at the printer, there is no way to help or advise you.

Read Full Q/A … :
Unknown Printer

PGBK Ink not printing well
ANSWER : hey, check this post fixyourownprinter .com/posts/68247

Read Full Q/A … :
Unknown Printer

Front panel under front door (holds developer & toner installation area)
ANSWER : Not familiar with that model, but all doors have a peg on each side that go into holes in the frame. Did you try putting one peg in and then flexing the door to get the other one in. Without seeing it, that’s the best I can offer.

Read Full Q/A … :
Unknown Printer

Print file sent but no printing occurs
ANSWER : Been working on these since they first were released. Never seen a problem like yours. If it happens again, try doing an engine test, as it bypasses the formatter board. The engine test is located at the right side of the manual tray opening. Look for a hole in the side wall. Stick something like a paper clip into it to actuate the test button. It will then print a lined test page. If it does that, then it points to the formatter board as the cause of your problem.

Read Full Q/A … :
Unknown Printer

Help the cover on the back of my printer is lost and my printer keeps on shooting out paper from the back end with no writing on it?
ANSWER : There are no parts available, therefore no solution to your problem.

Read Full Q/A … :
Unknown Printer

My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.

Read Full Q/A … :
Unknown Printer