What is the best approach to maintain my Epsons?

Press these down, hold… and then, press and hold the Power/On button as well. Hold for about 10 seconds and then release. Now turn the printer off, wait until the lights go out and then turn the printer back on and you should now find the waste counter has been reset.

You can use a Bluetooth®-enabled PDA, phone, computer, or other device to send images to your printer wirelessly with an optional Bluetooth photo print adapter.

There is a Windows 10 driver available for this model of printer but according to the manufacturer`s website this should be installed automatically.

When the red H ink light flashes, one or more ink cartridges are low on ink. When the red H ink light stays on, you need to replace the cartridge(s). When you print, you`ll also see a message on your screen telling you which cartridge is low or empty.

Hey, you can reset Epson ink cartridge without resetter! As shown above, you can reset Epson chips by pressing and holding the button above the chip with a bent paper clip for 10 seconds.

Why is my Epson printer skipping lines when printing? Apart from a clogged printhead, one other potential culprit is the electronic connection of your cartridges with your printer. Try removing your cartridges from your printer, and then shutting your printer down.

REPLACED BY THE NEW EPSON SURECOLOR P 9000 PRINTER!

You can print your documents and photos on an Epson printer connected to a wireless (Wi-Fi) network from your smartphone or tablet (iOS/Android). You can even scan and save files on your device to send them as an email, or upload to an online storage service such as Evernote, Google Docs, Dropbox, and Box.

If a Windows 11 driver is not available from Epson, you can install the simple drivers that come with Windows 11. They will automatically install when your product is connected to the same network as your Windows 11 computer or connected to your Windows 11 computer with a USB cable.

If you just replaced an ink cartridge and the power light is still flashing after 3 minutes, the cartridge may be installed incorrectly. Reinstall the ink cartridge. Paper is jammed in the product. Remove the jammed paper, and press the B&W copy button or the color copy button to clear the error.

If your printouts are faint or have gaps, try these solutions: Clean the print head. The ink cartridges may be old or low on ink, and you may need to replace them. Make sure the paper type setting matches the type of paper you loaded.

To find out which ink cartridge is empty, check EPSON Status Monitor 3 (for Windows) or EPSON StatusMonitor (for Macintosh). You can also tell which cartridge is empty by checking the speed at which the error light flashes when the print head moves to the ink cartridge replacement position.

Press the left or right arrow button to select Maintenance > Reset Ink Level. Press the start button, the OK button twice, and then the start button again. Press the right or left arrow button to highlight the ink tank you refilled and press the OK button to select it. Repeat for each ink tank color you refilled.

Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.