HP LaserJet 4M
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
On HP inkjet printers, the printer roller is not on the paper tray; it is on the area inside of the printer where the paper tray slides into the unit. Remove the paper tray and sit your HP inkjet printer upright, so the paper tray area is facing upward, and then look for the printer roller.
Pick up the front of the tray, pull it out slightly, and lower the tray back down so it is level. Pull the right side of paper tray out. Move the paper tray to the right and take the tray out of the machine.
Clean each roller using a clean lint-free cloth lightly moistened with water (distilled water preferred). Rotate the rollers to clean the entire surface.
A printer transfer roll is a component in your office`s laser printers that transfers images onto paper. The component also collects any excess toner and routes it to a waste reservoir so the ink doesn`t collect inside of your printer.
roller printing, also called direct printing, method of applying a coloured pattern to cloth, invented by Thomas Bell of Scotland in 1783. A separate dye paste for each colour is applied to the fabric from a metal roller that is intaglio engraved according to the design.
For cleaning, HP recommends using HP Equipment Cleaning Wipes, but you can use an HP-approved lint-free wipe and deionized or distilled water. Note: If dark spots appear on back side of prints, clean drum screen. Note: If minilab prints more than 2000 prints each day, clean drum screen up to twice daily.
pickup roller. in a printer, the roller that picks up pieces of paper from the paper tray. It usually has a soft, rubbery surface. The pickup roller should be cleaned or replaced if the printer is suffering frequent paper jams from the inability to pick up a piece of paper.
Rollerball ink is a water-based liquid, where ballpoint ink is an oil-based liquid. Water-based inks are thinner, or lower viscosity. They flow faster. Oil-based inks are thicker, or higher viscosity.
You don`t have to “safely” remove a printer. The Safely Remove Hardware option exists mainly for hard drives, flash drives/cards, etc. The idea is to stop any read/write options that may be in progress to prevent data corruption.
Dust, paper fiber, and other debris might accumulate on the pick rollers and cause paper feed issues. To help prevent paper feed issues, clean the rollers inside the printer and in the duplexer (if equipped). If the other steps in this document fail to resolve the issue, then reset the printer.
Remove the roller cover inside the printer. Pull up on the tabs, then slide the rollers to the left to remove them. Insert the replacement rollers and slide them to the right until they click into place. Replace the roller cover and press down on it until it clicks into place.
The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.
Read Full Q/A … :
HP LaserJet 4M
Printer jams paper from both trays even after replacing pick up roller
ANSWER : Update: I have the duplex model, and when the paper seems to reach the point where it jams, the printer squeals like two rubber parts are rubbing together when they’re not supposed to.
Read Full Q/A … :
HP LaserJet 4M
Error message to load paper and push OK, but not out of paper
ANSWER : I assist the binary options for a long time, and only half this past year I decided to alter the strategy for a better, she called for help Bing and he gave me this web site http://bestoptionstrategies.net .Now I focus on the suitable technique for themselves, and things gone up. I think everybody else faced with this particular problem. I believe my estimation will soon be helpful to you.
Read Full Q/A … :
HP LaserJet 4M
paper drive wont accept paper
ANSWER : There is probably a small scrap of paper stuck at the left edge of the paper path. The paper hits it and skews to the left. The smaller size bypasses it. You need to shove something stiff, like a piece of file folder, down the paper path and attempt to dislodge it.
Read Full Q/A … :
HP LaserJet 4M
Canon mx410 Paper jam message, but no paper jam?!
ANSWER : I have exactly the same problem, no answers 😳
Read Full Q/A … :
HP LaserJet 4M
Canon Pixma Printer Paper Does Not Feed Properly/"No Paper" Error Occurs?
ANSWER : Pretty much useless advice. I also have serious doubts about someone who is obviously not fluent in the English language.
Read Full Q/A … :
HP LaserJet 4M
Error Message "Paper out" when paper loaded
ANSWER : Check your paper tray settings as printer may be looking for paper from the manual feed tray on top of printer.
Read Full Q/A … :
HP LaserJet 4M
bits of paper stuck in rollers, how do i remove cover?
ANSWER : every model of printer is different so without knowing what type of printer it is nobody can tell you how to remove the cover without sounding like a smarty. Some sap on and others have multiple screws.
Read Full Q/A … :
HP LaserJet 4M