Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Checking the connection from a PC

Press «5» on the [Configuration] screen. Check that [Network Setup] is selected, and press «OK». Press ▼ to select [Wired(LAN1) Information], and press «OK». Press ▼ several times to select [IPv4 Address], and press «OK».

Check that the same IP address is set for the machine and the machine`s port setting on the computer. Check that the IP address is not duplicated by another device. Check that the correct IP address, subnet mask, and gateway address are set. If using OKI LPR Utility, check the IP address setting with OKI LPR Utility.
Select the Start button, then select Settings > Devices > Printers & scanners. Under Add printers & scanners, select Add a printer or scanner. Choose the printer you want, and then select Add Device. If you don`t see the printer you want, select The printer that I want isn`t listed.
Place the printer near the network router. Make sure paper is loaded in the main tray, and then turn on the printer. From the Wireless or Setup menu, select Network setup or Settings, and then select Restore Network Settings. Get the network name and password.
Start the Network Card Setup Utility. Select this machine from the list. Select [IP Address] from the [Actions] menu. Specify the settings as necessary, and click [Config].
Every printer contains an IP address that allows it to seamlessly connect to your computer (or other devices) through your Wi-Fi network. Here`s everything you need to know about finding your printer IP address—as well as some information about how printer IP addresses work.
To change your printer IP address, type its current IP address into the address bar of a web browser. Then go to the Settings or Network page and change your printer`s network to a static/manual IP address. Finally, type in the new IP address.
Printers are configured in the Printers section of the Windows Control Panel. Printer Settings: Displays the printer settings window associated with the selected printer. The desired paper size, among other settings, can be selected in the printer settings window.
The fastest way to open the console is to launch Run by pressing Windows key + R, then type printmanagement. msc and hit Enter. Next, right-click on the printer you want to manage and choose Properties… This will open the Printer Properties dialog with lots of options to configure.
Many computer connectivity issues are caused by something as simple as a loose cable. Make sure all of the cables connecting your computer to your printer are fully in place and completely fastened at both ends. If your printer is not turning on, the power cord could also be an issue.
If you`re using a wired printer, make sure that the printer cable is properly connected from the printer to your PC. For wireless printers, check the wireless connection. Make sure the printer`s wireless option is turned on and available.
If you`re using a wired printer, make sure that the printer cable is properly connected from the printer to your PC. For wireless printers, check the wireless connection. Make sure the printer`s wireless option is turned on and available.
The factory default password is “123456”. To change settings of the machine on the Web page, you must log in as the administrator of the machine.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

oki C830 Network menu
ANSWER : You need MuWin and your NIC firmware to upload to the host, but both things are keep under cover by OKI… Find attached old (and probably useless for you) files; check and say.. (https://mega.nz/#F!oEkA3JKZ)By the way, you should specify what firmware do you need ¿isn’t it? I don’t know yet what firmware uses my c511dn nor what NIC host it mounts… :~(

Read Full Q/A … :
Unknown Printer

Fix for network menu OKI C5XXXX series
ANSWER : And it’s still hard to find…..

Read Full Q/A … :
Unknown Printer

Oki C5300 problem : network menu disappeared.
ANSWER : You need MuWin and your NIC firmware to upload to the host, but both things are keep under cover by OKI… Find attached old (and probably useless for you) files; check and say.. (https://mega.nz/#F!oEkA3JKZ)By the way, you should specify what firmware do you need ¿isn’t it? I don’t know yet what firmware uses my c511dn nor what NIC host it mounts… :~(

Read Full Q/A … :
Unknown Printer

After flash format OKI C301dn… network losted 🙁
ANSWER : You need MuWin and your NIC firmware to upload to the host, but both things are keep under cover by OKI… Find attached old (and probably useless for you) files; check and say…(https://mega.nz/#F!oEkA3JKZ)By the way, you should specify what firmware do you need ¿isn’t it? I don’t know yet what firmware uses my c511dn nor what NIC host it mounts… :~(

Read Full Q/A … :
Unknown Printer

Which NIC and NIC F/W download and where find it OKI C511dn
ANSWER : Sorry, the right address: https://mega.nz/#F!oEkA3JKZ!YiWuhQTBl5ym-ilNRPYTaw

Read Full Q/A … :
Unknown Printer

Firmware(EEPROM) Oki C9650n.
ANSWER : Try the stuff I’ve find searching my OKI C511dn net card (still searching)

Read Full Q/A … :
Unknown Printer

Oki C5800 Lost Network settings/menu
ANSWER : Did this ever work for you?

Read Full Q/A … :
Unknown Printer

Epson Artisan 800 Blinking Menu
ANSWER : I actually managed to fix the error, and I literally have found ZERO websites that have the answer.

Read Full Q/A … :
Unknown Printer