HP LaserJet 4350
Experienced technical support provide their insights in answering this question :
I can’t believe, pieces of paper was under the registration flap, now my 4250N is working.
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Tray 2 lift error can be caused by a damaged, dislodged cartridge contact in the body of the printer, which would explain why multiple cartridges do not solve the problem. Open the cartridge door, remove the cartridge and inspect the contacts on the left side, they should look the same as the picture below.
This issue is caused when the pickup roller is dislodged or not installed correctly. The error message occurs due to the interference between the pickup roller and the lift plate in the paper input unit.
Under Hardware and Sound, click Printer. Right-click your product, and then select Printing Preferences. From the Printing Preferences menu, select Paper/Quality. From the Paper Source drop-down menu, select Tray 2.
The flag located right of the pick-up roller has a fixed position. If the flag becomes stuck or broken, it will produce a 60.02 tray lift error or a “LOAD PAPER” message.
Bend your hips and knees to squat down to your load, keep it close to your body, and straighten your legs to lift. Never lift a heavy object above shoulder level. Avoid turning or twisting your body while lifting or holding a heavy object.
Tray 2 holds up to 250 sheets of 75 g/m2 paper.
The 60.02 error indicates a possible fault with the paper tray lifter motor (RM1-1750). The . 02 points to the tray that is experiencing the issue.
A 13. B2. FF paper jam error appears on the control panel when paper is jammed in the top of the printer. Check the printer for jammed paper and clear the jam, if needed.
The bypass tray, also known as the multi-purpose tray or general-purpose tray, is a tray on your copier that can be used to print jobs on media that cannot be run from the main trays of your device. Use it for OHP transparencies, adhesive labels, translucent paper, and paper that cannot be loaded in the paper trays.
HP Printer Paper Tray Lock A Paper tray lock is used to prevent the tray from accidental use. The lock is used in printers that contain multiple trays. It is mainly used in printers while inserting special papers into the input tray.
An Er/02 error message indicates that the toner cartridge door is open or not closed completely. To resolve the error, open the toner cartridge door, and then close it completely.
Quick fix. Error code e02 occurs due to overheating of the printhead or when the paper is not correctly placed into the input tray and therefore the paper feed rollers are unable to pick up the paper from the paper tray.
The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.
Paper jams can occur for a variety of reasons, such as overloading the paper tray, loading different thicknesses of paper in the tray, or using paper that isn`t appropriate for your particular printer. False paper jams can also occur.
This error is primarily caused by a transfer alienation failure in which the ITB is stuck and unable to rotate, the SR9 sensor (the primary transfer roller disengagement sensor) has gone bad or the fuser drive assembly has failed.
The 59.40 is a “fuser rotational error“. Meaning the fuser was unable to rotate causing this error.
23 or 30.03. 45 Scanner Errors. The resolution for either error is to, if preferred to send a firmware update, then replace the flatbed scanner assembly. It has been found that it is in most cases the internal lamp that has failed, but is not available through HP as a replaceable part.
This system error indicates that printer is out of memory and this error appears in the Designjet 500 series printers with HP-GL/2 card installed. Follow these steps to fix the system error: Install the latest printer driver and firmware.
HP Printer Color Laser Jet Pro MFP M477fnw 60-02 error. A 60.2 error is a tray lift error for tray 2. This can be caused by an issue with tray 2 lift mechanism, a broken tray 2 or something jammed that is preventing the tray from lifting properly.
When a 99.09. 66 error is displayed on the control panel, it indicates one of the following: a hard disk drive or solid state memory drive is not installed. a hard disk drive or solid state memory drive is not connected properly.
Open the Printers and Faxes window, right click on the printer, and choose “Properties.” There should be a “Printing Preferences” option there. Anything you set there becomes the default for all future printing.
Another way to solve this issue is to make another copy of the printer under devices and printer and call the printer letterhead P3015. Now go into preference and change tray to be used from automatically select to Tray 2. Set the type to any which should be the type you have set at the printer and it should work.
The bypass tray is intended primarily for small-quantity jobs using special media. The bypass tray is on the left side of the printer.
To specify a tray within MS Word the user must: Click File and then Print. In the Print Dialogue click Page Setup. In the Page Setup window click on the Paper tab.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
HP LJ 4350 – Tray 2 not lifting, no motors turn.
ANSWER : I can’t believe, pieces of paper was under the registration flap, now my 4250N is working.
Read Full Q/A … :
HP LaserJet 4350
HP Laser Jet 4250 13.01.00 Jam in Tray 2
ANSWER : did you check if there’s multiple feeding while pulling papers
Read Full Q/A … :
HP LaserJet 4350
My Printer Hp 2200 scanner motor beep sound not worked iam purchage motor please available motor site send my email : [email protected]
ANSWER : Hp Printer Technical Help 1855 777 1707 Toll Free Helpline.
Read Full Q/A … :
HP LaserJet 4350
Paper jam in tray 2 (but no paper pulled from tray) also M476DN models
ANSWER : Isopropyl alcohol is not recommended for rubber rollers. It dries out the rubber and hasten it’s cracking and breaking. It will do nothing to restore the grip. Those rollers are really hard to replace. It would be easy if that dumbass secondary menu really worked. None of the techs I’ve spoke to ever got into it. Everyone I know sends a print job and listens for the roller to rotate into position where you can pull it off.
Read Full Q/A … :
HP LaserJet 4350
HP Laserjet 2200, Tray 2 Pickup Problem, Gears Clicking
ANSWER : Definitely not a solenoid problem. I’ve worked on tens of thousands of printers and never replaced a single solenoid. You probably knocked something loose when you installed the pickup roller. Maybe something to do with the gear on the end of the pickup roller shaft. You’ll need to take the gear assembly off to be able to see it.
Read Full Q/A … :
HP LaserJet 4350
HP 2200 – blinking attention light and tray 2
ANSWER : Nice day. (QUALITY IS OUR CULTURE)
Read Full Q/A … :
HP LaserJet 4350
Laserjet M603DN tray 2 not lifting
ANSWER : I had a similar issue with a M602, though it’s the previous generation machine they are close in design. This one kept saying tray 2 lifting but there was not a sound of the motor even trying. My first thoughts were replace the lift motor then DC controller but it was replacing the formatter that fixed it after other parts made no difference.
Read Full Q/A … :
HP LaserJet 4350
error 59.99 turn off then turn on
ANSWER : Read this forum thread http://www.fixyourownprinter.com/posts/51164
Read Full Q/A … :
HP LaserJet 4350