Epson Stylus Color 1520
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The Cause of Clogs
Printheads clog because nozzles get blocked by either air or ink. Clogs usually happen when: You keep printing with depleted ink cartridges. Using empty ink cartridges can result in air bubbles that can clog your cartridge and/or printhead.
Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. The ink cartridges may be old or low on ink, and you may need to replace them. Your printed colors can never exactly match your on-screen colors.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Open the Applications folder, open the EPSON Printer Utility3, select your Epson printer, and click OK. Then select Head Cleaning. 3. Follow the on-screen instructions to start the cleaning cycle, which lasts around 1 minute.
The sponge end of a blocked printer head can be cleaned with only one liquid other than water. This liquid is isopropyl alcohol. Isopropyl alcohol isn`t strong enough to melt the sponge but is still strong enough to dissolve the ink inside the blocked printer head.
Print head cleaning uses both color and black ink. To avoid wasting ink, clean the print head only if print quality declines (for example, if the printout is blurry or the color is incorrect or missing).
The ink levels may be low and you may need to refill the ink. Visually check the ink levels. Also make sure you filled the tanks with the correct colors of ink. After you print, the colors in your printout need time to set as the ink dries.
When designing for a printed format, the best color profile to use is CMYK, which uses the base colors of Cyan, Magenta, Yellow, and Key (or Black). These colors are usually expressed as percentages of each base color, for example a deep plum color would be expressed like this: C=74 M=89 Y=27 K=13.
Here are the most common causes of a printer printing faded text or images: Low ink or toner levels. Toner sticking to the fuser roller or problems with the transfer roller. Low ink or toner density settings.
Trick the printer.
Low ink doesn`t mean no ink. Remove the cartridge, wipe it with a lint-free cloth and reinsert it. This process can fool your printer into “thinking” you`ve put in a new cartridge and may help it eke out a few more pages.
If documents that you have scanned are printing with a blue background, you will need to calibrate the machine from within the printer driver. Click here for instructions on how to calibrate the machine. Follow the instructions below for your operating system.
If you`re still experiencing quality issues or printhead errors, then there may be other problems at play. Before taking any other actions, it`s recommended that you clean the printhead and ink cartridges four or five more times.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Clean the printheads: Sometimes the issue why you are unable to print in color is because our printheads are clogged with ink. Clean the printheads and then print a document to check if color printing works. Some printers also have in-built programs that can clean themselves so remember to check for that.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.
Read Full Q/A … :
Epson Stylus Color 1520
Need help for Epson Stylus color 3000 print head?
ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.
Read Full Q/A … :
Epson Stylus Color 1520
Epson Stylus Pro 9000 print head problems
ANSWER : Shot in the wind. I have an Epson 9000 Stylus Pro. Have had it for a long time and take extremely good care of it. I run maybe a dozen or two 2X3 posters a year on it. I am very careful about dust and clean the machine often.
Read Full Q/A … :
Epson Stylus Color 1520
Print head sponges
ANSWER : Yes, but Epson won’t sell them to you. If you can figure out how to get to them, you can just take them out and wash them in hot water. Otherwise, Google how to reset the warning message on your model. The tanks hold much more ink than the warning permits.
Read Full Q/A … :
Epson Stylus Color 1520
can't align print head horizontally despite running program
ANSWER : Don’t call that number, it’s a phishing scam number as far as I can tell. Last thing you want to do is have them remote into your computer (they may try hacking you in the background to try & steal bank info/saved passwords) or give them a CC number for tech help since they are not directly affiliated with Epson. As far as Epson’s site shows there is no toll free tech line, only 2 800s listed on their site and 1 is presales other is for supply orders.
Read Full Q/A … :
Epson Stylus Color 1520
What fluid to clean epson head?
ANSWER : There’s only 1 left, so better hurry. http://www.rjettek.com/jiecr-ocp-rinse-epson-blue/
Read Full Q/A … :
Epson Stylus Color 1520
Epson TM-U220 no test printing, troubleshoot nada
ANSWER : My TM U220 also not printing, it appears that windows do not recognise it. The internal test sugested above does not work either. Any suggestion would be welcome.
Read Full Q/A … :
Epson Stylus Color 1520
EPSON Stylus NX400 Vista Print Problem
ANSWER : I have the similar issue. The browse button would not open the connection listing the shared printer. How can I fix it? Please respond to this post or contact me via buy essays. Thank you in advance!
Read Full Q/A … :
Epson Stylus Color 1520