Epson Stylus Photo R2400
When I send a print job the paper feeds, but it does not stop when it reaches the print head, and the printer does not begin sweeping the heads back and forth. Instead the paper continues to feed until it is fully ejected. The power light blinks and the paper light is on solid. This light combination is not in the documentation (at least that I can see.)
Experienced technical support provide their insights in answering this question :
I was able to get it to print the internal test page by holding down the sheet paper feed button while turning the machine on — then continuing to hold the sheet paper feed button. It took several attempts, feeding a page straight through, but eventually it caught the sheet and printed. So it may be a timing issue as others have mentioned. It could still mean that the feed rollers are worn out. The back side of the large D-shaped feed roller has visible abrasion on it. The abrasion is difficult to see as the roller does not stay with the flat side exposed.
How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Make sure your paper meets the specifications for your product. If paper dust builds up on the rollers, they may lose traction and become unable to feed paper properly. Clean the paper guide. If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary.
There are a few things that could be the cause of this problem, including: Empty ink or toner cartridges that need replacing. Ink or toner cartridges that have become dislodged from their proper place. The wrong paper size loaded in the input tray.
Select > Paper Setting > paper source > Print Adjustments > Paper Feed Adjust. Select one of the following: Auto: automatically adjusts the paper feed setting (takes 9 to 35 minutes to complete); Epson recommends running this option first.
The printer will not operate if a black ink cartridge is expended or any cartridge is removed. If a color cartridge is expended, you may be able to continue printing temporarily with black ink. It`s best to always have extra cartridges on hand.
If your printer keeps jamming, you should know that the most common cause of a jam is misalignment of the paper. Paper needs to load in smoothly, completely flush with the tray. Overfilling the tray is a great way to ensure you will be spending some personal time getting to know the inside of a printer.
The printer`s laser projects your print onto a drum. A drum then uses static electricity to attract the dry toner to the drum`s cylinder. The drum then rolls the toner onto the paper to create your print. The toner powder is melted and pressed onto the paper with heat from the fuser as it goes through a set of rollers.
Document specifications. The Automatic Document Feeder (B81321 ) allows you to automatically load multi-page documents into your scanner. This is useful for OCR (optical character recognition) scanning, or for creating an image database or PDF files.
Push down the release lever to slightly raise the feeder mechanism and release the paper. Then slowly pull the jammed paper out of the feeder mechanism. (Be careful not to pull too hard; the paper may tear, making it more difficult to remove.) If paper is still jammed inside the mechanism, open the cover to remove it.
The ADF loads your first document page, then Epson Scan prescans it and displays it in the Preview window. The ADF then ejects your first page. Place your first page on top of the rest of the pages, then load the entire document into the ADF.
You can also tell which cartridge is empty by checking the speed at which the error light flashes when the print head moves to the ink cartridge replacement position. See the table below. Replace the black ink cartridge if the error light flashes at the same speed as the power light.
The Cause of Clogs
Printheads clog because nozzles get blocked by either air or ink. Clogs usually happen when: You keep printing with depleted ink cartridges. Using empty ink cartridges can result in air bubbles that can clog your cartridge and/or printhead.
Make sure the USB cable is connected securely at both ends and meets the requirements. Run a printer check. If the test page prints, make sure your software is installed correctly. Make sure the printer cover is closed.
The Cause of Clogs
Printheads clog because nozzles get blocked by either air or ink. Clogs usually happen when: You keep printing with depleted ink cartridges. Using empty ink cartridges can result in air bubbles that can clog your cartridge and/or printhead.
Make sure the USB cable is connected securely at both ends and meets the requirements. Run a printer check. If the test page prints, make sure your software is installed correctly. Make sure the printer cover is closed.
Reasons for Epson printer will not print from computer
Not properly connected to the electrical supply. Not set as a default printer. Low ink levels. Jammed paper.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.
Read Full Q/A … :
Epson Stylus Photo R2400
Paper feeds straight through without printing on an Epson R2400
ANSWER : I was able to get it to print the internal test page by holding down the sheet paper feed button while turning the machine on — then continuing to hold the sheet paper feed button. It took several attempts, feeding a page straight through, but eventually it caught the sheet and printed. So it may be a timing issue as others have mentioned. It could still mean that the feed rollers are worn out. The back side of the large D-shaped feed roller has visible abrasion on it. The abrasion is difficult to see as the roller does not stay with the flat side exposed.
Read Full Q/A … :
Epson Stylus Photo R2400
Epson R2400 printer paper jam reports all the time
ANSWER : I would like to second this question. I have the same issue with the media not being detected by the printer. The forwarding wheels squeak more than I would expect. I wonder where the sensor is that it uses to decide if there is paper or not. If I can figure it out I will post the saga here.
Read Full Q/A … :
Epson Stylus Photo R2400
Epson R2400 flashing top two lights.
ANSWER : right..i had thisroblem and have fixed it..take rear cover off .looking from back..there is a small black sensor that had come loose.. reafix..and all working good
Read Full Q/A … :
Epson Stylus Photo R2400
Weird Problem: Epson R2400 Printer won't power on
ANSWER : I just had exactly the same thing happen. The printer is usually on, but now is off and will not power on. Anybody know what is going on? Is there a fuse blown? Where would that fuse be?
Read Full Q/A … :
Epson Stylus Photo R2400
Need help for Epson Stylus color 3000 print head?
ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.
Read Full Q/A … :
Epson Stylus Photo R2400
Epson TM-U220 no test printing, troubleshoot nada
ANSWER : My TM U220 also not printing, it appears that windows do not recognise it. The internal test sugested above does not work either. Any suggestion would be welcome.
Read Full Q/A … :
Epson Stylus Photo R2400
EPSON Stylus NX400 Vista Print Problem
ANSWER : I have the similar issue. The browse button would not open the connection listing the shared printer. How can I fix it? Please respond to this post or contact me via buy essays. Thank you in advance!
Read Full Q/A … :
Epson Stylus Photo R2400