Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Error: 410, 411, 412, 413. The indicated cartridge ran out of toner. Opening and closing the output tray can resume printing for a while, but it may damage the image drum. Replace the toner cartridge with a new one as soon as possible.
This error indicates that a sensor error has occurred in the image drum. If the error is not resolved after the toner cartridge and the image drum are reset according to the guidance on the device`s Operator panel, this may be because the belt unit is not properly installed so that the image drum moves upward.
543 Toner Sensor Error after installing a new or replacement print cartridge into the printer. Check the print cartridge for the following problem before checking any other possible causes. Confirm that all shipping restraints have been removed from the print cartridge.
Error Code: 102

Something has interfered with the reading or writing of the RAM (memory) during the start-up process. Restarting your machine should clear the memory and allow it to start up properly.

Error: 410, 411, 412, 413. The indicated cartridge ran out of toner. Opening and closing the output tray can resume printing for a while, but it may damage the image drum. Replace the toner cartridge with a new one as soon as possible.
This error indicates that an unrecoverable error has occurred in the fuser unit.
This error indicates that an incompatible toner cartridge or image drum is installed to the device. An error occurs when a toner cartridge or image drum with abnormal information manufactured by a third party is installed. Install a genuine toner cartridge/image drum that is appropriate for the device.
If the message “[Colour] Toner cartridge not properly installed.” (Error: 544, 545, 546, 547) is displayed, confirm the following items. This error indicates that the toner cartridge of the indicated colour is not properly installed.
The Oki error codes 140, 141 and 142 all relate to the performance of your printers drum. The drum is crucial to the performance of your Oki printer, so you`ll need to resolve the problem before you`re allowed to print again.
In the event of a 131,132, or 133 error, reseating the LED Head Ribbon cable typically resolves this issue. You want to reseat the cable ONLY when the unit is POWERED DOWN.
If your printer is giving you an error of either 160, 161, 162 or 163 you`re experiencing a fault with a cartridge sensor. The number of the error corresponds to the cartridge experiencing the problem: 160 – Yellow Oki Cartridge. 161 – Magenta Oki Cartridge.
OKI C824 Error 263 Fuser unit jammed.
You`ll get a 406 error if the answer tries to send too many bytes outside the allowed range. Accept-encoding: This section of the header is used to compress files so they can be sent from the server to the browser fast. A 406 error code is generated when certain encoding methods and formats aren`t accepted.
The HyperText Transfer Protocol (HTTP) 410 Gone client error response code indicates that access to the target resource is no longer available at the origin server and that this condition is likely to be permanent.
ANSWER. This error occurs when this machine cannot read the information of consumables and maintenance products.
The “231: Fatal Error 03” is related to a failure of reading the RFID chip that is embedded in the toner cartridge.
ANSWER. This error is displayed when a timeout occurs while the device is receiving the print data over the network. There is a menu called [Timeout Injob] on the device. This menu sets the waiting time (sec) of the device, from when the received data process is stopped until the page is output.
If the “Paper jam has occurred. Remove and check the TRAY cassette.” message is displayed, a paper jam has occurred in a tray. The error code shows the location of the paper jam, with “391” indicating Tray 1 and “392” indicating Tray 2.
Remove the jammed paper from the output exit. Pull the front cover open lever (blue) to open the front cover. Pull the L2 lever and lift the output tray until it reaches the stop position.
If the “Paper jam has occurred. Please open the scanner unit and the output tray to check.” message is displayed, a paper jam has occurred near the fuser unit or the image drum.
A paper jam has occurred around the front cover.
04: Runaway of the Port CPU due to noise etc.
Error: 544, 545, 546, 547. A color toner cartridge indicated on the screen is not installed. Make sure that the lever on the toner cartridge is fully turned and the protective tape is removed.
ANSWER. This error indicates that the toner cartridge is not installed or not properly installed.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Which NIC and NIC F/W download and where find it OKI C511dn
ANSWER : Sorry, the right address: https://mega.nz/#F!oEkA3JKZ!YiWuhQTBl5ym-ilNRPYTaw

Read Full Q/A … :
Unknown Printer

Density Shutter Error
ANSWER : I’ve never worked on one of those printers, but I have never, ever seen 1 valid solution for printer repair on fixya.com I read the replies there when I need a good laugh. Makes me wonder what the “techs” on that forum actually do for a living. It certainly couldn’t be printer repair.

Read Full Q/A … :
Unknown Printer

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :
Unknown Printer

Error code 79 on Oki Page 12i/n
ANSWER : Open the lid of the printer and check the two cables on the right side (on the inside of the lid). Make sure both cables are introduced correctly in the plugs. This should resolve the problem. Good luck, Mark

Read Full Q/A … :
Unknown Printer

Oki error codes
ANSWER : Hi,

Read Full Q/A … :
Unknown Printer

Firmware(EEPROM) Oki C9650n.
ANSWER : Try the stuff I’ve find searching my OKI C511dn net card (still searching)

Read Full Q/A … :
Unknown Printer

Oki C5300 problem : network menu disappeared.
ANSWER : You need MuWin and your NIC firmware to upload to the host, but both things are keep under cover by OKI… Find attached old (and probably useless for you) files; check and say.. (https://mega.nz/#F!oEkA3JKZ)By the way, you should specify what firmware do you need ¿isn’t it? I don’t know yet what firmware uses my c511dn nor what NIC host it mounts… :~(

Read Full Q/A … :
Unknown Printer

Error Message 4F on MFC 210C
ANSWER : Basically this kind of error caused by loss of voltage on print head. If this is the case then I suggest to buy a new printer rather than replace print head. Print head might be too costly.

Read Full Q/A … :
Unknown Printer