How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
This error refers to the Laser unit, which is responsible for all printing procedures. It does not have to do with the scanner or ADF. So, yes, you will have to replace the Laser unit to fix it. If you found this post helpful, you can let others know by clicking the “Accept as Solution” button.
The 52 Scanner error indicates that the printer has experienced an internal hardware error. Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket.
52.00 is laser error, there is nothing end user can do, the printer needs to be professionally serviced. The possible solutions are: Turn the device off, and then turn the device on. Reseat the connectors between the laser/scanner and the DCC, (DC controller), (J801 and J321).
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
An invalid path in the System. CFG file causes this error.
52 Scanner Error
The product has experienced an internal hardware error. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket.
52.00 ERROR
Verify that the scanner motor connector and the ribbon cable from the ECU are firmly seated on the laser/scanner assembly. 2. Verify that the scanner motor connector is firmly seated in connector J402 on the ECU. You might have to remove the main cooling fan to see this connection.
Check the cabling carefully, you may have damaged the Flat flexible cable that plugs into the scanner or pinched the wires that run across the front of the scanner. Also the codes are usually 52.
The four standard cartridges would be present attached to a rotating device called Carousel under the printer cover. The issues with the carousel rotation and the misplacement of the cartridges upon the printer devices would result in issues with the printer device called as printer error 54.2.
Open Settings -> Devices -> Printers and Scanners (or run a quick access URI command: ms-settings:printers ); Select a printer you want to remove and click Remove Device; Confirm the printer removal.
This error has the following causes and solutions: A statement refers to a file with a file number or file name that is: Not specified in the Open statement or was specified in an Open statement, but has since been closed. Specify the file name in an Open statement.
Error 52 is related to a filename trying to be opened that does not conform to standards of the operating system. Make sure the directory name where GP is installed isn`t too long, and the Report ID doesn`t have any special odd characters in it that aren`t compatible with naming a file in Windows.
Go to device manager to update the driver for the problem device. Or you can also try Driver Easy for updating drivers automatically. That`s it.
Error 52 in this case directly maps to AIX/Linux errno 52 STALE FILESYSTEM. This condition can result when a SAN or iSCSI attached block device that serves as the backend storage for the failing directory/filesystem disconnects from the host briefly.
Laser printer fusers adhere toner powder to a page using a combination of heat and pressure. Error 50.5 occurs when the fuser fitted physically but the printer has specifically identified it as wrong.
52.00 ERROR
Verify that the scanner motor connector and the ribbon cable from the ECU are firmly seated on the laser/scanner assembly. 2. Verify that the scanner motor connector is firmly seated in connector J402 on the ECU. You might have to remove the main cooling fan to see this connection.
52.00 ERROR
Verify that the scanner motor connector and the ribbon cable from the ECU are firmly seated on the laser/scanner assembly. 2. Verify that the scanner motor connector is firmly seated in connector J402 on the ECU. You might have to remove the main cooling fan to see this connection.
Err 50, Err 52 –
Inverter overload, Inverter peak current If the over current trip level is continuously exceeded, the inverter will shut down: wait 30 seconds and then restart. The Inverter can supply more power than the nominal power level for a short time. If the time is exceed the inverter stops.
The HP Color Laserjet CP2025 10.100 Supply Memory Error is normally the result of a chip error on one of the cartridges. First you should check that each cartridge has a chip, it could have just fallen out.
Err 50, Err 52 –
Inverter overload, Inverter peak current If the over current trip level is continuously exceeded, the inverter will shut down: wait 30 seconds and then restart. The Inverter can supply more power than the nominal power level for a short time. If the time is exceed the inverter stops.
The HP Color Laserjet CP2025 10.100 Supply Memory Error is normally the result of a chip error on one of the cartridges. First you should check that each cartridge has a chip, it could have just fallen out.
The HP Color Laserjet CP2025 10.100 Supply Memory Error is normally the result of a chip error on one of the cartridges. First you should check that each cartridge has a chip, it could have just fallen out.