EPSON 3000 rejects film Ulano brand only

Epson Stylus Color 3000

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

All cartridges must be installed with ink for printing and printer maintenance. For print quality, some ink remains in replaced cartridges. Designed for EPSON cartridges only: Other brands of ink supplies are not compatible and, if described as compatible, may not function properly or continuously.

Epson Printer Doesn`t recognise a new cartridge

This is to ensure it has clicked in place properly. If this doesn`t work, remove and inspect the cartridge chips. Clean away any dirt or ink that may be preventing it from being recognised. Refit and check if this has solved the problem.

Make sure the Black/Grayscale or Grayscale setting is not selected in your printer software. Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. The ink levels may be low and you may need to refill the ink.

You can use plain paper; however, for the best results, you`ll want to use one of Epson`s special inkjet papers. Note: Inkjet transparencies and vellum paper are not supported. You can load one sheet of binder paper with holes on one of the long edges.

Ensure Proper Ink Cartridge Insertion

There is a possibility that it didn`t properly click into the designated slot. If this is the case, you should lift the cover and double-check in order to verify that the cartridge is clicked into place. Otherwise, it would not be possible for the printer to detect it.

Yes, you can use a compatible or third-party brand of ink in your printer. Lower priced printer cartridges from third-party companies are available for almost every popular printer model and can save printer users thousands on printing costs every year.

Epson does not recommend refilling or using 3rd party ink cartridges. Using these products will not void the product`s original warranty, however, if these 3rd party products cause a failure, the repair of that failure will not be covered under warranty.

Incompatible cartridge errors may appear when there is a communication breakdown between the printer and the chip on the cartridge. If your printer is turned on, disconnect the power cord from the printer. Keep the power plug unplugged for 60 seconds, reconnect the power cord to the wall, and turn on the printer.

Step 1: Unplug your Epson printer. Step 2: Use your computer to process a printing job before turning your printer on again. Step 3: Plug in your Epson printer. Step 4: This process will override the ink cartridge settings and print out the document.

Clean the printheads: Sometimes the issue why you are unable to print in color is because our printheads are clogged with ink. Clean the printheads and then print a document to check if color printing works. Some printers also have in-built programs that can clean themselves so remember to check for that.

Select Print Settings from the pop-up menu. Select plain papers or Envelope as the Media Type setting. Select the Grayscale check box. Click Print to close the Print dialog box.

You can use plain paper; however, for the best results, you`ll want to use one of Epson`s special inkjet papers.

After opening the lid, hold the ink button down. When you find the ink holer is moving to its position, then open the cartridge`s lid which is having no ink. Close it again without removing the cartridge. Close the lid and start to print.

The ink cartridges may not have been installed using the correct procedure, or they may not be seated correctly. Follow the instructions below to correctly install and reseat the ink cartridges. Note: This product is designed to use only genuine Epson-brand ink cartridges.

An Epson Printer can work best with an original Epson ink cartridge, but it can be coaxed to print using cloned or third party inkjet cartridges.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson Stylus Color 3000

ANSWER : Hi i’ve a problem with my espon 3000… i’ve didn’t use it for a while (maybe 3 years) and now i bought new compatible cartridge but the printer doesn’t print anything… maybe the printhead is blocked or anything else.. can you help me?

Read Full Q/A … :

Epson Stylus Color 3000

Need help for Epson Stylus color 3000 print head?

ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.

Read Full Q/A … :

Epson Stylus Color 3000

Epson printer can't recognize Epson ink cartridge

ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson Stylus Color 3000

Epson 7880 ink pump sucking ink

ANSWER : Not ink pump, but air pump, to put the ink feed under pressure.

Read Full Q/A … :

Epson Stylus Color 3000

Epson Artisan 835 print head cleaning question

ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :

Epson Stylus Color 3000

Epson Artisan 700 Ink Reset — Any Other Way

ANSWER : I really need the utility but How do I send you a message? I dont see your address

Read Full Q/A … :

Epson Stylus Color 3000

Epson R3000 Inkjets Clogged

ANSWER : If you haven’t yet destroyed your printer or turned it into a paper weight, check this out:

Read Full Q/A … :

Epson Stylus Color 3000

Epson Stylus PX810FW

ANSWER : You could have air in the tubing/print head.