Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If you install the wrong ink cartridge in your printer, you will likely receive an error message on your printer display that prevents you from using the printer. Printers are smart and most will be able to tell right away if the wrong cartridge is installed.
Open Printer Setup Utility. From the Printer Setup Utility menu, choose `Reset Printing System`. Click `Reset`.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
The cartridges are not interchangeable, so be sure to put the correct cartridge in it`s corresponding slot. Insert the new cartridge into the slot and pull the latch back over the cartridge so it is secure.
This is because of the chips on the ink cartridge, each chip is programmed to allow inks to only work with certain printers. Therefore, you are unable to use a different number ink in your printer which is not compatible with your printer. Check your printer manual to see what numbers your printer takes.
Can you print with one or two empty ink cartridges? The quick answer is: Yes, you can (if you own a printer model that allows it) — but you shouldn`t keep printing with an empty cartridge for too long.
This error message is usually the result of a cartridge that is not firmly seated in its designated slot. To troubleshoot the problem, begin by completely removing the cartridge from its port. Reinstall the cartridge by positioning it so that it snaps into place and is securely fastened in its slot.
Clean the Cartridge Contacts: one of the most common reasons you might get a cartridge problem error when your cartridges are new and full is the contacts on the cartridge might be dirty or otherwise obscured from making good contact with the electronics in the printer head carriage.
Clean the Cartridge Contacts: one of the most common reasons you might get a cartridge problem error when your cartridges are new and full is the contacts on the cartridge might be dirty or otherwise obscured from making good contact with the electronics in the printer head carriage.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

How to reset ink cartridge Canon Pixma MG6320
ANSWER : Your post is a bit confusing. You don’t reset the chip, you pull off the old one and replace it with the one they gave you.

Read Full Q/A … :
Unknown Printer

Get Canon printer technical support service experts
ANSWER : What you will get is separated from your money. Just Google the phone number and read about all the scams they perpetrate. Definitely don’t call it.

Read Full Q/A … :
Unknown Printer

Canon IP1200 and IP1600 Cartridge Not Recognized
ANSWER : Cara mengatasi ink cartridge cannot be recognized printer canon – Printer Canon Pixma Ip 2770 yang telah diinfus dan mengalami kendala pada saat akan menggunakannya kendalanya tersebut ditandai dengan pesan error, “INK CARTRIDGE CANNOT BE RECOGNIZED” Ini adalah trik untuk mengatasinya: Trik menangani masalah “INK CARTRIDGE CANNOT BE RECOGNIZED” Printer anda bermasalah? Blinking 5-7 x orange? Dan muncul pesan “The following ink cartridge cannot be recognized” pada monitor anda ? permasalahan bukan pada catridge nya dan tidak perlu ganti baru, berikut cara nya – Buka cover printer – Cabut cartridge (yang bermasalah) – Tutup cover printer – Matikan printer dan cabut kabel power – Tunggu beberapa saat (kira-kira 5-10 menit) – Hidupkan printer dan langsung buka cover printer – Pasang cartridge (yang tadi anda lepas) – Matikan printer dan cabut kabel power – Hidupkan kembali – Jalankan test print Jika masih bermasalah pastikan tempat catridge anda tertutup dengan benar,jika masih bermasalah juga sebenar nya permasalahan pada infus lubang catridge warna anda, untuk memastikan cobalah anda memasang catridge warna anda yang terdahulu tidak ada masalah,jika tidak ada masalah dengan dengan catridge warna terdahulu,cobalah lepas infusan pada catridge warna anda, jika ternyata bisa tanpa dipasang selang infus catridge warna, maka dipastikan tempat catridge terlalu menekan catridge warna anda.Yang anda butuhkan adalah melakukan coakan pada tempat catridge/dekat per pegas (lihat gambar yang diberi merah dibawah ini)

Read Full Q/A … :
Unknown Printer

Canon PIXMA ip4000 Cartridges
ANSWER : It had been exactly the same subject, couldn’t discover an appropriate broker and method for earnings ultimately had to rummage through the Web, and there I ran across this website http://optioninvest.org.Probably you will find there is a remedy to your trouble, many thanks for the fascination!))

Read Full Q/A … :
Unknown Printer

Canon MP600 died
ANSWER : hey guys I found this on the net check it out maybe somebody can make something out of it cuase they omitted this part on the service manual that I attained cause I have the same problem hope this helps.

Read Full Q/A … :
Unknown Printer

Canon Printer reset tool for MP100 MP400 series
ANSWER : Thanks a million for this. I have just managed to get my MP460 Ink levels reset having tried lots of other sites and failed.

Read Full Q/A … :
Unknown Printer

Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.

Read Full Q/A … :
Unknown Printer

Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.

Read Full Q/A … :
Unknown Printer