Brother MFC 3100C
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
If one or more of the colours are missing from your printed document, the ink cartridges may not be installed correctly or nozzles in the print head may be clogged up. To solve this issue, do the following: Check the print quality and clean the print head. Install a new genuine Brother ink cartridge.
If one or more color ink cartridges are low but not at the end of their usable life and you want to minimize the use of color ink, change the settings in the Brother software to print with black ink only (grayscale). If you print with black ink only, the other ink cartridges must have ink for the printer to print.
No, the orange plastic underneath the drum is not supposed to stay in the machine. This is a protective cover that should be removed before installation. Your drum will not fit properly into your machine if you try to install the drum with the orange plastic cover still on.
If the cartridge is in the wrong position the tube will fill with the wrong color. To resolve this issue you will need to clean the print head. NOTE: It may require 10 to 15 cleanings to clean the ink tubes and print head.
You can now create beautiful printouts with award-winning, affordable, state-of-the-art, black-and-white or color laser printers from Brother.
There are a few things that could be the cause of this problem, including: Empty ink or toner cartridges that need replacing. Ink or toner cartridges that have become dislodged from their proper place. The wrong paper size loaded in the input tray.
Some printer driver settings use cyan (C), magenta (M), yellow (Y) for monochrome printing. In such cases, you will not be able to print without the cyan (C), magenta (M) or yellow (Y) toner.
Many printer models require at least some ink in all cartridges to keep printing. However, if you`re lucky, your software may allow you to squeeze out the rest of your color ink without using black.
You should not unplug the machine when it is not in use. When the machine is off, it will still periodically clean its print head to maintain print quality. To prolong the length of the print head, provide better ink efficiency, and maintain print quality, you should keep your machine plugged in at all times.
To maintain good print quality, the machine automatically cleans the print head when needed. If there is a print quality problem, start the cleaning process manually. Clean the print head if there is a horizontal line or a blank space in the text or graphics on printed pages.
If you can see missing short lines in any of the four color blocks press 2 (NO) and repeat the quality check and cleaning process. Repeat this procedure at least 5 times if print quality remains a problem. If short lines are still missing after the fifth cleaning and test print, replace the necessary ink cartridges.
By tweaking the values of each ink, a printer is able to produce countless colors. Inkjet printers work via subtractive color mixing. As different colors of ink are combined, each ink absorbs (subtracts) its characteristic colors and amounts of light.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Click the start menu and search for `Devices and Printers`. Select devices and printers in the search bar. This will allow you to see the printers connected to the computer. Click the printer you want to check, and you`ll see the ink levels at the bottom of the devices and printers section.
This is due to several factors such as poor quality ink being used, tanks not being mixed often enough causing sediment to gather at the bottom of the tanks or not being used often enough. All of these factors can cause the black ink or the colours not to print.
Certain printers can print with an empty cartridge, while others require that all cartridges have some ink. Identify your cartridge type for details.
Laser printers use toner powder instead of ink to produce prints in both monochrome and color. The key to how laser printers work is understanding the drum, a cylindrical, photosensitive component that allows the laser to pick up toner through static electricity.
When color ink is expended and black ink still remains, you can continue printing for a short time using only black ink. However, you should replace the expended ink cartridge(s) as soon as possible. See the following section to continue printing temporarily with black ink.
It is one of the four colors of ink used in color printing by an inkjet printer, along with yellow, cyan, and black to make all other colors. The tone of magenta used in printing, printer`s magenta, is redder than the magenta of the RGB (additive) model, the former being closer to rose.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
i. When the paper type is set to Plain Paper, the machine will only use black ink to print. ii. If the paper type is set to Inkjet Paper or any other media, all four (4) colors will be used to print in grayscale.
i. When the paper type is set to Plain Paper, the machine will only use black ink to print. ii. If the paper type is set to Inkjet Paper or any other media, all four (4) colors will be used to print in grayscale.
This is due to several factors such as poor quality ink being used, tanks not being mixed often enough causing sediment to gather at the bottom of the tanks or not being used often enough. All of these factors can cause the black ink or the colours not to print.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
BROTHER MFC 490CW/ MFC 210C
ANSWER : The industry says that at least once a month you should print something, even a test print page to avoid the ink drying up in the print heads. Most printers including Brother will turn themselves on occasionally to clean themselves. I do not recommend refilling your ink cartridges yourself. You can buy ‘non-OEM compatible refilled’ ink cartridges for you printers very cheaply but not all that make/sell these are of the same quality. So if this is of interest to you then you need to shop around until you find a good & reputable compatible non-OEM ink seller.
Read Full Q/A … :
Brother MFC 3100C
Brother MFC-5440CN 'Unable to Clean'
ANSWER : PRINTER MODEL MFC-J410W: PAPER JAM CLEARED, STILL WON’T PRINT–“UNABLE TO CLEAN 50” IS DISPLAYED. TRIED BOTH PURGE AND FLUSH–NEITHER WORKED. ANY OTHER IDEAS?
Read Full Q/A … :
Brother MFC 3100C
Brother MFC-J6510DW extra paper tray.
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))
Read Full Q/A … :
Brother MFC 3100C
brother mfc 7420 toner life end message
ANSWER : Thanks a million. I tried all the other tricks and nothing worked. This worked perfectly on my MFC 8810. I wich I would have known this a long time ago
Read Full Q/A … :
Brother MFC 3100C
brother mfc 9440 cn
ANSWER : I was able to fix the same problem with scotch tape on the selinord with removing it
Read Full Q/A … :
Brother MFC 3100C
MFC 8440 Brother 5 in 1
ANSWER : I have the same problem except both left and right hinges are broke. I’ve removed the and it does work but I’d still like to order the parts and replace them. Where would I find the parts for ordering.
Read Full Q/A … :
Brother MFC 3100C
Brother MFC 8220
ANSWER : This problem is normally caused by the fuser. There’s a brown driver gear who frequently broke and you’ll be obliged to replce it to take care of the problem.
Read Full Q/A … :
Brother MFC 3100C
Brother MFC-9840CDW Print Unable 32 Error
ANSWER : That is caused by a sticking solenoid. It’s not that hard to fix, I’ve done a bunch of them. Here is a video that shows how. https://www.youtube.com/watch?v=6Bob34TLrPQ
Read Full Q/A … :
Brother MFC 3100C