black will not print after cleaning the nozzle head 5 times

Epson WorkForce WF-3540
black will not print after cleaning the nozzle head 5 times

Experienced technical support provide their insights in answering this question :

There’s way to clear your print head. Go to Youtube site of Jose Rodriquez. He’s got a video on just about every aspect of printing. Put something like a folded shop towel, spray it with Windex, no deodorants etc. just the original Windex, no ammonia D, and some alcohol (not rubbing alcohol but 90 percent or some such). Fold towel into a strip about and inch and a half or so and put it in the cup like trough that the print head follows when printing. Start printer. Let printer just begin. When head moves out of the dock, and unplug the printer. Now you can move head manually. Maneuver head over the towel. Leave it overnight. You may need to do this many times. I had about given up when my print head cleared up. I think you need to see Jose’s video, then you’ll understand better. If you can’t find it or you need more help, feel free to email me. There are other resources, but I wouldn’t go for commercial cleaning kits. That’s just me. And I’m leery of trying to put pressure through the head. I hope this helps. It’s kind of brief. There is a man I found who had written almost a book on the subject. He’s not anxious for his name to be given out however.

How to Identify and Fix Common printer Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If the ink level is sufficient, but the printer still does not print black ink, you may need to run a cleaning cycle. A cleaning cycle is a process that cleans the printer heads and removes any clogged or dried ink.

If you don`t see any improvement after cleaning the print head up to 4 times, turn off the printer and wait at least 6 hours. This lets any dried ink soften. Then try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or damaged and needs to be replaced.

Check you have the latest drivers installed for your printer, try uninstalling and reinstalling your printer drivers or try changing the driver settings (adjusting the paper settings has been known to solve the problem). Fully Reconfigure the Printer – If all else fails, you can try entirely reconfiguring your printer.

If your Epson printer is printing out faint images, skipping lines, or is streaking your image with lines, chances are you have a clogged nozzle–a common problem many users have with Epson printers. It`s unavoidable that print heads clog over time as small amounts of ink residue dry up and collect in the nozzles.

Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.

Dried Ink Buildup on the Printhead

If the print cleaning cycle doesn`t work, dried ink may be the culprit. Take the printhead out and wipe the nozzles clean to remove any buildup. Depending on the model of your printer, this may be difficult—some printheads are harder to remove than others.

If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.

If the quality of your printouts remains poor even after repeatedly cleaning and aligning the print head, one or some of the ink cartridges may be old or damaged and should be replaced. To replace an ink cartridge before the Status Monitor notifies you that the cartridge is empty, see Replacing an Ink Cartridge.

Material stringing, missing layers, clicking sounds in your extruder gears, and inconsistent extrusion patterns—specifically thin layers—are all symptoms of a partially clogged nozzle. And if no filament is coming through your extruder onto the build platform, you could be dealing with a fully clogged nozzle.

Even if your cartridge is full and ready for action, it may have become slightly dislodged and no longer in full electrical contact with the printer. The easiest way to rectify this potential problem is to simply remove and reinstall the cartridges.

There are numerous possible causes for a printer that`s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.

Tip #1: Run print head cleaning cycles. Quite often, running several print head cleaning cycles will unclog a nozzle, when perhaps one or two cycles will not. Run up to five cycles in sequence. Print a nozzle check pattern after every one or two cleaning cycles to see if you have made any progress.

Note: After a Power Cleaning, you must turn off the product and wait at least 12 hours before printing a nozzle check pattern and running another Power Cleaning or Print Head Cleaning.

Printhead cleanings can take about 1 or 2 minutes and they do use some ink to run through the cleaning process. Once complete, print out a test page to compare print quality. If the print results look good, you can continue printing.

Print head cleaning uses both color and black ink. To avoid wasting ink, clean the print head only if print quality declines (for example, if the printout is blurry or the color is incorrect or missing).

The printer will not operate if a black ink cartridge is expended or any cartridge is removed. If a color cartridge is expended, you may be able to continue printing temporarily with black ink. It`s best to always have extra cartridges on hand.

There are chips inside the original cartridges to record how many pages were printed and they cannot be reset. As a result the printer reads the chips and tells you that the cartridges are empty, even though they are not. This is why you are getting the “ink low” message even though the ink tank is at full capacity.

HP printhead lifespans can vary significantly. We`ve seen a printhead that prints 40,000 pages and have also seen some print only 2,000 or less. The HP`s one-time use cartridge should last at least ten refills, but it sometimes fails before that.

Ink cartridges can dry out over time. If they are sitting in your machine for an extended period, they will eventually dry up and become unusable. The simplest way to combat this problem is by printing more frequently or running regular cleans and ink tests to ensure the nozzles remain clean.

Reasons for Epson printer will not print from computer

Jammed paper. Ink cartridge issue. No paper is installed. Outdated printer driver.

If the nozzle check page does not print satisfactorily, you may need to repeat the head cleaning and print the nozzle check pattern again. If print quality hasn`t improved after repeating this procedure four or five times, turn the printer off and leave it alone overnight.

After a Power Cleaning, you must turn off the product and wait at least 12 hours before running another Power Cleaning. Turn off the product.

There may be several reasons behind the issue, such as empty ink cartridges, Clogged Print Head Nozzles, and Incorrect Print Settings. There may be a fault in the settings of Color Management as well. You can fix it via Running a Nozzle Check or enabling the Print Settings to Color or Replacing the Ink Cartridges.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

black will not print after cleaning the nozzle head 5 times

ANSWER : There’s way to clear your print head. Go to Youtube site of Jose Rodriquez. He’s got a video on just about every aspect of printing. Put something like a folded shop towel, spray it with Windex, no deodorants etc. just the original Windex, no ammonia D, and some alcohol (not rubbing alcohol but 90 percent or some such). Fold towel into a strip about and inch and a half or so and put it in the cup like trough that the print head follows when printing. Start printer. Let printer just begin. When head moves out of the dock, and unplug the printer. Now you can move head manually. Maneuver head over the towel. Leave it overnight. You may need to do this many times. I had about given up when my print head cleared up. I think you need to see Jose’s video, then you’ll understand better. If you can’t find it or you need more help, feel free to email me. There are other resources, but I wouldn’t go for commercial cleaning kits. That’s just me. And I’m leery of trying to put pressure through the head. I hope this helps. It’s kind of brief. There is a man I found who had written almost a book on the subject. He’s not anxious for his name to be given out however.

Read Full Q/A … :

Epson WorkForce WF-3540

Epson Artisan 835 print head cleaning question

ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :

Epson WorkForce WF-3540

changing from printing in photo black to black ink

ANSWER : You can change the black ink cartridge and choose either Matte Black or Photo Black.You will need to use the Black Ink Conversion Kit that came with your printer. The kit includes three conversion cartridges (yellow, magenta, and cyan), which are used to reduce the amount of ink consumed in the conversion. dissertation writing service

Read Full Q/A … :

Epson WorkForce WF-3540

Canon i560 Will not print black

ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.

Read Full Q/A … :

Epson WorkForce WF-3540

Black line on printed copy

ANSWER : Have absolutely no idea what kind of machine you have so here’s the generic answer. Big copy glass, little copy glass to the left of it. Take window cleaner, put it on paper towel, clean little glass.

Read Full Q/A … :

Epson WorkForce WF-3540

black cartridge not printing

ANSWER : https://www.youtube.com/watch?v=thrZtvAhKm0

Read Full Q/A … :

Epson WorkForce WF-3540

print heads

ANSWER : Try this: http://support.hp.com/us-en/document/c04293162

Read Full Q/A … :

Epson WorkForce WF-3540

PRINTER FAILS TO PRINT BLACK TEXTS/IMAGES

ANSWER : https://www.youtube.com/watch?v=f57jOGj-G5s