Xerox WorkCentre Pro 416S

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The toner cartridge is the container that holds the toner powder. The drum unit is an electrically charged cylinder that fuses that toner powder onto paper to create text and images. Both of these components are essential for producing a print.
Found within any laser printer, a toner drum is a component which transfers the toner powder stored within the cartridge onto the paper. It comes in the form of an electrically-charged cylinder. The printer will take toner powder from the cartridges and apply it on to the drum unit`s roller.
But the replacement of a drum unit is vital to laser printers` health. A degraded drum unit can cause streaks, smudges, and blank spots on your printed page even if you just inserted a new printer toner. While a broken drum unit won`t break your printer, it will just fail to stop printing at a certain point.
The message `Replace Drum` will appear if the drum unit is at the end of its rated life. Brother recommends that customers use only genuine Brother drum units and/or toner cartridges.
The drum rolls the toner onto the paper in the form of your print. The toner is melted & pressed onto the paper by heat from a fuser as it passes through its rollers. Your print comes out of the printer.
Buying extra drums for your office laser printer saves money and time, but the components do have a shelf life. Shelf life is a period of time the components can be stored and still be suitable for use. A laser printer drum`s shelf life is approximately two years if the drum is still in its protective bag.
There are many factors that determine the actual drum life, such as the temperature, humidity, type of paper, type of toner used and so on. Under ideal conditions, the average drum life is estimated at approximately 15,000 pages.
What is a printer drum? Printer drums are a part of laser printers. A printer drum is a cylinder that is electrically charged and is responsible for transferring toner onto the paper via heat and pressure. The image lines drawn on the drum are created by laser beams, and contain electrical charge.
The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced. The drum counter must be reset manually.
You`ll know the drum is dirty if you notice that the print quality has become blurry and features blank spots or oddly-colored spots despite having full toner cartridges. Horizontal lines across the printout when the paper passes over a dirty area are another sign that it`s time for some maintenance.
The fuser unit or fuser is a critical part of any laser printer. Using pressure and heat, it fuses the toner powder onto the page to create a print, and without it, the printer cannot operate.
Streaking, smudging, black lines, and double images are all symptoms of a bad fuser. When you notice these printing defects and experience problems, such as paper jams or wrinkles, this is a good sign to replace the fuser kit.
The drum unit and toner cartridge shelf life is 2 years if the protective bag is unopened or 6 months after the protective bag is opened. Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges.
You can extend the drum life and keep it clean by occasionally cleaning the corona wire. You can simply do this by sliding the little plastic piece attached to the corona wire back and forth a couple of times. After you replace your drum, don`t forget to reset it.
Printer is an output device, which is used to print information on paper.
All laser printers require a toner cartridge and a drum unit to produce a print. However, some printers only need you to replace the toner cartridge, and others require that you regularly replace both the toner cartridge and the drum unit. Most printers use toner cartridges with the drum unit built into the cartridge.
They recommend always changing your drum heads before you start recording. Otherwise, if you`re just practicing and playing normally, you should find yourself replacing heads every six months or so. Six months isn`t a hard rule, and for some could be a risky amount of time to wait.
Replace your drumheads if there is pitting and/or tearing. Replace your drumheads if they don`t stay in tune. This usually means the drumheads are stretched to their limits. Bass drum batter side heads can be replaced much less often when using a bass drum patch.
So, the toner cartridge is the container that holds toner particles while the drum unit is the component that holds the image that needs to be printed.
Drum heads wear out!

Drummers who practice a lot should probably change heads once every six months. Drummers who own their own drums can probably change the heads without any problem, but if it is the first time, it might be a good idea to have someone at the drum shop, or an experienced drummer, teach you.

When the printer`s Error light flashes, an ink cartridge is low on ink. This is a good time to make sure you have a new cartridge handy. When the Error light stays on, a cartridge is empty and you need to replace it.
You can refresh the drum to improve print quality if streaks or white spots appear on printed images. Consult your service representative before using this function. Do no printing operations while the drum is being refreshed.
1 Prepare cleaning material. For cleaning, HP recommends using HP Equipment Cleaning Wipes, but you can use an HP-approved lint-free wipe and deionized or distilled water. Note: If dark spots appear on back side of prints, clean drum screen.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

hp 8600 pro when power on, paper jam message appear but there is no paper jam in the tray
ANSWER : Hp 8180 Photosmart All In One code keeps says paper jam and carriage jam when neither are jammed. I followed all the recommended things to do. I live in Raleigh NC any place to take this or any suggestion.

Read Full Q/A … :

Xerox WorkCentre Pro 416S

Xerox 7760 Wrong paper size error when trying to print to A4
ANSWER : At first you could try to print using the Multifunction/Bypass Tray on the left side of your printer.

Read Full Q/A … :

Xerox WorkCentre Pro 416S

paper curl problem
ANSWER : Paper curling is caused either by excess heat or toner on the fuser that sticks to the page. I’ve seen it also caused by heavy bands of printing too close to the top of the page.

Read Full Q/A … :

Xerox WorkCentre Pro 416S

stylus pro 9000 Printing garbage ( letters and characters)
ANSWER : OK I think the Main Board has gone bad. Does anyone know how difficult it is to replace it? Is it just an R&R situation? or is there more to it?

Read Full Q/A … :

Xerox WorkCentre Pro 416S

Epson Stylus Pro 9800 Service / Repair Materials
ANSWER : service call error 00010005 . how to solve?

Read Full Q/A … :

Xerox WorkCentre Pro 416S

Xerox 6180: Can I force continued cartridge use?
ANSWER : There is no workaround to ‘fool’ the printer into continuing printing.

Read Full Q/A … :

Xerox WorkCentre Pro 416S

I bought a used Stylus Pro 3880 that needs some service or repair.
ANSWER : You’ll want to search online for the service manual for that unit, it will list the service req codes, and give you a quick expl

Read Full Q/A … :

Xerox WorkCentre Pro 416S

Xerox Color Qube 8570 Error Code
ANSWER : From Service Manual

Read Full Q/A … :

Xerox WorkCentre Pro 416S