How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
It means there is an incorrect parameter in the paper size. This happens mostly with the wrong print driver in use, or when an application overrides the driver. So make sure it is the right print driver, and make sure that the Application is not set to an odd size.
024-747 The specified combination of parameters (stored file size, paper size, paper tray, duplex command, output tray) cannot be executed or continued. Load Paper in Trays 1-4. Make sure that the paper size, paper tray, duplex settings, and output tray settings are correct for the job.
Press the Machine Status button on the Control Panel. Select the Tools tab on the Touch Screen. Select Troubleshooting. Select Resets.
Fault Code 027-777: SMTP Server Does Not Support SMTP Authentication. This fault code occurs when the connection to the SMTP Server fails as SMTP Authentication is unsupported or not enabled on the server. NOTE: The Scan to Email Feature is only available on the Copier/Printer model.
Streaking, smudging, black lines, and double images are all symptoms of a bad fuser. When you notice these printing defects and experience problems, such as paper jams or wrinkles, this is a good sign to replace the fuser kit.
Restoring the factory-set defaults returns most of the settings to the factory defaults. It will not reset the page count, tray size, or language.
The default password will be 1111 on most printers or the serial number of the machine. The password on most devices is case sensitive, so if your serial number contains letters, please use the correct case.
a misprint or misspelling in a text.
I will be glad to help. An E2 error occurs when the printer attempts to print a single-page or multi-page print job, and the paper length selected in the print settings does not match the length of the loaded paper.
Make sure the paper are using is within specifications for the paper tray. Clean the Fuser Stripper Fingers. If clearing the paper path does not clear the fault code,Power the Printer Off and On.
Fault Code 010-333: Fuser Center Thermistor Over Temperature or Overheat Error.
Try the following: Clear all paper jam messages, then power the printer off and on. For additional information, refer to How To Power the Printer Off and On.
This fault indicates that the paper did not turned on the feed out sensor at the correct time. Perform the following: Check for paper handling failure due to obstacles on the paper path.
The fuser unit or fuser is a critical part of any laser printer. Using pressure and heat, it fuses the toner powder onto the page to create a print, and without it, the printer cannot operate.
Resetting your office PC to factory settings removes any applications and files installed on the system as well as any third-party device drivers and personal settings.
Select Start , then select Settings > Devices > Printers & scanners . Under Printers & scanners, find the printer, select it, and then select Remove device. After removing your printer, add it back by selecting Add a printer or scanner.
Unable to scan, copy, or send a fax or Scanner System Failure error displays. The error displays for scanner hardware or power issues, such as a scanner bar jam or calibration issue, low scanner bulb temperature, or an internal or external electrical problem. It is not related to network or USB connection issues.
Press the Machine Status button and select the Tools tab. 4. Select System Settings > Common Service Settings > Screen/Button Settings.
What does error 0x80070005 mean? Windows update error 0x8007005 indicates that the system user lacks permissions or the system update does not contain critical files needed to install the update.
Error message “0x0000052e” indicates the following error: “Logon failure: unknown user name or bad password.”
Some of the most common printer problems that most of us have experienced include paper jamming, slow printing, uneven printing, and wrong colour output. If you use your printer frequently, we know how annoying it can be to have persisting problems with the printer.
1: Check Printer Power, Cables, and Paper
Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.
The print server is not connected to the network properly
Make sure that the print server and network are connected by a LAN cable properly. Make sure that the network settings for the print server are appropriate.