Xerox Phaser 8400 error code: 07,010.43:73937

Fault Code 07-110: Paper Jam or Tray Empty Fault.

Xerox Phaser is the brand name for a line of color and monochrome printers produced and sold by Xerox. Some Phaser printers use Xerox Solid Ink.

This fault indicates that the fuser belt has walked out to its limit. If XPP trained, center the fuser belt and ensure that the belt edge actuator is on the edge of the belt and not on the surface of the belt.

Turn the printer off, wait 20 seconds and turn it back on again. Both USB and Wi-Fi connected printers require the correct and current printer driver is installed on the computer you`re printing from. Go to Xerox support, search for your printer and download the latest driver for your printer model.

The message `Fuser Error` or `Self-Diagnostic` means either the fuser has reached the maximum temperature allowed or there has been an error in detection of the correct temperature during specific times of the printing process.

Streaking, smudging, black lines, and double images are all symptoms of a bad fuser. When you notice these printing defects and experience problems, such as paper jams or wrinkles, this is a good sign to replace the fuser kit.

Fuser Units

The coating wears off and causes the toner to not fuse properly. There are replacement rollers and sleeves on the market that you can replace and turn a non-functional fuser into a good working one. Rebuilding fuser assemblies is not a new thing.

Fault Code 10-310: Fuser Temperature Adjustment, Please Wait… This error displays because the machine is adjusting the fuser temperature, please wait until correct temperature is reached. Opening the front door for a short time may help. If the problem persists, contact Support for additional assistance.

Some of the most common printer problems that most of us have experienced include paper jamming, slow printing, uneven printing, and wrong colour output. If you use your printer frequently, we know how annoying it can be to have persisting problems with the printer.

Among the more common technical issues that may bring down a printer are disconnected cables, malfunctioning routers, and low ink levels. Moreover, software problems such as interrupted connections or incorrect settings in your system`s drivers can also cause your printer to show up as offline.

Depending on the model, a typical life span on an office copier can range from three to five years. The life span of your copier largely depends on the copy volume and maintenance. Most copier models are designed to produce 1,000 copies per month at the low end, with higher-end copiers producing upwards of 50,000.

Based on verified reviews from real users in the Managed Print Services in the Distributed Workplace market. HP has a rating of 4.4 stars with 172 reviews. Xerox has a rating of 4.6 stars with 128 reviews.

This fault indicates that the paper did not turned on the feed out sensor at the correct time. Perform the following: Check for paper handling failure due to obstacles on the paper path. Check that the proper paper type is installed in the tray.

Fault Code 077-110: Jam in the Device Message – POB Sensor On Jam. The following are the top reasons why paper jams occur: unsupported paper/media is used. incorrect paper settings in the tray and/or the print driver.

Check that paper in Tray 1 is loaded correctly. Check for jammed paper in Tray 1. If the problem persists, contact Support for additional assistance.