Xerox Phaser 8200DP

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Usually a quick paper setting adjustment will clear up a ghosting issue right away. Run a cleaning – Most printers have a cleaning function built into the machine. Run this a couple of times to attempt to clear up the printing issue. Inspect the drum – Sometimes excess toner powder can stick to the drum.
Ghost prints happen when the drum or fuser unit within your printer become faulty. Because a fault with this element won`t heat the particles of the toner to a high enough temperature, the marks being made on the paper are much lighter in colour and appear more faded than typical documents.
Check the Auto Power Off setting. If this setting is set to On, the printer will automatically power off after the Low Power Timeout, Sleep Timeout, and Auto Power Off Timeout complete. To prevent the printer from automatically powering off, disable the Auto Power Off feature.
The terms “double printing,” “ghost printing,” or “ghosting” may all refer to a printing defect where an image or text block from a previous print is repeated onto the current page. Usually, ghosting happens due to a mechanical defect in the printer.
Wipe clean the cartridge carriage where the cartridge connects to remove any dried ink (make sure the printer is off and unplugged). If the printhead is built into the printer, clean where the ink comes out with a damp cloth. Re-install cartridges and run a print head cleaning process.
If a fuser unit is not heating the toner powder correctly, ghost images can appear when printing. You can check to see if the fuser unit or drum unit is causing the ghosting by having a look at the ghosted images.
There are numerous possible causes for a printer that`s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.
Check Cables and Printer USB Ports

Check all cable connections (including the power cord) on the printer side. If the printer does have power and you`ve properly connected the communication cable, but the printer is still not recognized, try switching to a different USB port on the PC.

Most copiers last between three to five years, under average circumstances. This figure is often surprising to business owners, who expect copiers to last for much longer. If your copier is giving you trouble, consider when you purchased the machine.
You can lay another sheet of soaked and blotted printmaking paper on the sheer layer of remaining ink on the plate, and either run it through the press, or rub it with a spoon for a hand transfer to pull a ghost print.
Ghost printers are printers that continue to appear in Windows although they have not been used or installed on your system in a long time, which may have been years.
By pressing fewer keys simultaneously, you can prevent ghosting. You may have to adjust your typing technique; some people instinctively press multiple keys at once when typing. Once you get into the habit of pressing fewer keys simultaneously, though, you should experience fewer instances of keyboard ghosting.
A person ghosting typically has little acknowledgment of how it will make the other person feel. Ghosting is associated with negative mental health effects on the person on the receiving end and has been described by some mental health professionals as a passive-aggressive form of emotional abuse or cruelty.
Even if your cartridge is full and ready for action, it may have become slightly dislodged and no longer in full electrical contact with the printer. The easiest way to rectify this potential problem is to simply remove and reinstall the cartridges.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
In some respects, the signs that your printer has been infected with malware are similar to the general signs of a malware infection on your computer, the signs include unusual behaviour by your printer, such as not responding to your commands, printing unauthorised print jobs and refusing to install security updates.
Restoring the factory-set defaults returns most of the settings to the factory defaults. It will not reset the page count, tray size, or language.
A software reset clears the temporary files from the System and the Network Controller. A power off and on sequence shuts down the printer and clears any data in the Volatile Memory.
As print quality goes down over time, this will be a reason to replace the color printer. We find a black and white printer can sometimes last 10 years or more and most color laser printers are replaced every 3 to 5 years.
Based on verified reviews from real users in the Managed Print Services in the Distributed Workplace market. HP has a rating of 4.4 stars with 172 reviews. Xerox has a rating of 4.6 stars with 128 reviews.
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
The Print Spooler is software built into the Windows operating system that temporarily stores print jobs in the computer`s memory until the printer is ready to print them. In some circumstances you may need to stop and/or restart the service.
Ghost Paper* is a new type of notebook. Instead of printed lines, all structure is embossed/debossed. Its patented design allows for a faint rule that disappears in direct light.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Xerox Phaser 3250 solid red light with no apparent reason
ANSWER : I found the problem to be a fuser. For $150 you can fix this issue. Cheaper to buy a new unit.

Read Full Q/A … :

Xerox Phaser 8200DP

xerox phaser 6100
ANSWER : This post is from nearly a decade ago, so don’t know if the thread is still active. I have this printer in my rural WV classroom and am searching for a fuser unit for the Phaser 6100. Anybody know where I can still purchase one ?

Read Full Q/A … :

Xerox Phaser 8200DP

How to reset page counter on Xerox Phaser 3160N
ANSWER : http://apexmic.info/how-to-reset-chip-xerox-phaser-3160.html

Read Full Q/A … :

Xerox Phaser 8200DP

Xerox Phaser 7750 – FUSER delima
ANSWER : Thanks! On my printer, one of the magnets did dislodge and was stuck on the other side. I finally figured out what it was from your advice. The magnet was not broken and popped right back in to place. Keeping my fingers crossed that was the only issue.

Read Full Q/A … :

Xerox Phaser 8200DP

Xerox 6180: Can I force continued cartridge use?
ANSWER : There is no workaround to ‘fool’ the printer into continuing printing.

Read Full Q/A … :

Xerox Phaser 8200DP

Phaser Jams every time code: 0,006.74
ANSWER : http://www.support.xerox.com/support/phaser-8560mfp/support/enus.html

Read Full Q/A … :

Xerox Phaser 8200DP

Xerox 7760 Wrong paper size error when trying to print to A4
ANSWER : At first you could try to print using the Multifunction/Bypass Tray on the left side of your printer.

Read Full Q/A … :

Xerox Phaser 8200DP

Fault
ANSWER : That error indicates that the expected voltage from the power supply is not being drawn – if printer is plugged into surge protector it can get that error message as well. Printer should be plugged directly into an outlet.

Read Full Q/A … :

Xerox Phaser 8200DP