Xerox DocuPrint N17
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
This issue is usually caused by the PostScript language not being installed on the device. NOTE: There are two ways to confirm if Postscript is enable on the Printer. Locate installed languages on the configuration report.
A printer`s heads, nozzles, and other components can become dirty or clogged, which could show up as white lines running across your page. Your printer may have a head-cleaning feature available through your device software located on your computer or from the control panel on the printer itself.
If your printer is spitting out pages full of strange characters, symbols, or strange formatting, your inkjet printer drivers may be outdated, incompatible with your operating system or corrupt. Drivers are important to the proper function of your inkjet printer and it is best to check for updates regularly.
On the print screen, go to Page Scaling. Step 5: Under Page Scaling, select none.
Depending on when the device was manufactured, the default administrator password may be the device serial number or 1111. Click on Connectivity > Setup . Click on Edit to the right of WSD (Web Services on Device). Select or deselect the WSD Enabled check box to enable or disable the option.
Click on [Port Settings]. Next to LPD, select the [Enabled] or [Disabled] check box. NOTE: Disabling LPD will affect clients printing to the printer over TCP/IP using the LPR printing port.
Usually a quick paper setting adjustment will clear up a ghosting issue right away. Run a cleaning – Most printers have a cleaning function built into the machine. Run this a couple of times to attempt to clear up the printing issue. Inspect the drum – Sometimes excess toner powder can stick to the drum.
Clean the Feed Rollers
- Power the printer off. …
- Remove Paper Tray 1.
- Locate the Feed Roller at the back of the tray.
- Gently push out on the clip to unlock the roller, rotate the roller up, and then pull the roller off.
- Wipe the roller with a clean, lint-free cloth, moistened with water.
13 janv. 2016
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Xerox 7760 Wrong paper size error when trying to print to A4
ANSWER : At first you could try to print using the Multifunction/Bypass Tray on the left side of your printer.
HP LaserJet keeps on printing garbage characters
ANSWER : Solved. The same problem started with my HP LaserJet 4000 a few days ago. I tried unplugging, changing the print driver, re-installing the print driver, checking if print jobs were stuck and it was clear. Finally, I decided to go into the printer’s settings and reset the printer back to factory settings. It worked! That reset cleared out whatever the problem was and now it’s working perfectly. Wish I had thought of that sooner.
ANSWER : Call Printers Online Support Staff 1 855 777 1707 Toll Free Helpline.
stylus pro 9000 Printing garbage ( letters and characters)
ANSWER : OK I think the Main Board has gone bad. Does anyone know how difficult it is to replace it? Is it just an R&R situation? or is there more to it?
Xerox 6180: Can I force continued cartridge use?
ANSWER : There is no workaround to ‘fool’ the printer into continuing printing.
Xerox Color Qube 8570 Error Code
ANSWER : From Service Manual
when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?
Print file sent but no printing occurs
ANSWER : Been working on these since they first were released. Never seen a problem like yours. If it happens again, try doing an engine test, as it bypasses the formatter board. The engine test is located at the right side of the manual tray opening. Look for a hole in the side wall. Stick something like a paper clip into it to actuate the test button. It will then print a lined test page. If it does that, then it points to the formatter board as the cause of your problem.