HP Color LaserJet CM1312NFI
I brought a none hp toner however when trying to print the paper just comes out white NO Print on it can someone help me

How to Identify and Fix Common printer Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Here are the most common causes of a printer printing faded text or images: Low ink or toner levels. Toner sticking to the fuser roller or problems with the transfer roller. Low ink or toner density settings.
Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Reasons why your HP printer has ink but won`t print

This may seem obvious, but it sometimes happens: first make sure your paper tray has paper in it. Misalignment, clogged printheads, faulty data communication or insufficient ink levels can also be sources of the problem.

Common causes include dust and grime, worn rollers, or inappropriately weighted paper. Prevent paper jams by regularly cleaning your printer and replacing parts as needed. Check the weight of paper that your printer is rated for as well. The printed product is faded.
Paper Jams

This is a common laser printer problem. Primary causes include grime, dust, worn rollers, or incorrect paper weight. The most basic way to prevent paper jams is simply through regular cleaning of your printer. Also, replace parts as needed.

Right-click the printer that you want to use, and then click Printing preferences. Make your choices, and then click OK. Under option Print color select color , then the OK button. Now the printer is set to print in color.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
Click the Scan tile on the HP Smart app home screen. Select an option from the top menu bar. Scanner: Place the original on the printer scanner glass or into the automatic document feeder (ADF). Select scan job type, size, color, and resolution settings, and then click Scan in the lower right corner.
Click Start, go to Devices and Printers, right-click on the icon for your printer and select “Printing preferences.” There should be a “Color” tab. Look at that and make sure that “Print in Grayscale” is not selected. Click OK. The figure below is from a different HP printer, buy yours should be similar.
Click Start, go to Devices and Printers, right-click on the icon for your printer and select “Printing preferences.” There should be a “Color” tab. Look at that and make sure that “Print in Grayscale” is not selected. Click OK. The figure below is from a different HP printer, buy yours should be similar.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Print file sent but no printing occurs
ANSWER : Been working on these since they first were released. Never seen a problem like yours. If it happens again, try doing an engine test, as it bypasses the formatter board. The engine test is located at the right side of the manual tray opening. Look for a hole in the side wall. Stick something like a paper clip into it to actuate the test button. It will then print a lined test page. If it does that, then it points to the formatter board as the cause of your problem.

My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

'wont print
ANSWER : http://www.brother-usa.com/FAQs/Solution.aspx?FAQI…

wont print black when all commands tell it to do so
ANSWER : Awesome..You have clearly explained …Its very useful for me to know about new things..Keep on blogging..

Prints blank pages, won't print from computer
ANSWER : Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.

HP Deskjet 640c wont print??
ANSWER : yes

wont print
ANSWER : Since you provide no model, it’s difficult to troubleshoot. Assuming it is an Epson, they are famous for heads drying up after sitting unused for a week or more.