Epson WorkForce WF-2520
won’t line up so it will print

How to Identify and Fix Common printer Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If your printouts are slanted, try these solutions: Slide the edge guides against the edges of the paper. Select a higher print quality setting in your printer software. Align the print head.
Your Epson printer may have failed to recognize the new ink cartridge, or its ink level system has read it as empty. For numerous Epson printer models, there`s a way to bypass this built-in ink checking system through a quick cartridge reset. Raise the printer`s top cover and then hold the Ink button.
If you notice white or dark lines in your prints (also called banding), try these solutions before you reprint: Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. Make sure the paper type setting matches the type of paper you loaded.
If paper dust builds up on the rollers, they may lose traction and become unable to feed paper properly. Clean the paper guide. If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary. Then reload the paper.
If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or light horizontal bands, you may need to align the print head. You can align the print head automatically from the control panel or your computer, or align it manually from the control panel.
Print head alignment corrects the installation positions of the print head and improves deviated colors and lines. This machine supports two head alignment methods: automatic head alignment and manual head alignment. Normally, the machine is set for automatic head alignment.
If your printouts are blurry or smeared, try these solutions: Make sure your paper is not damp, curled, old, or loaded incorrectly in your product. Slide the edge guides to the edges of the paper. Use a support sheet with special paper, or load special paper one sheet at a time.
Do not perform any other operations until the printer completes the printing of the print head alignment pattern. This takes about 6 minutes. If the automatic adjustment of the print head position has failed, the Alarm lamp flashes. Refer to “Eleven flashes:” of [ Alarm Lamp Flashes Orange ].
Partial prints are a common issue with printers and there are several main reasons it can occur: Problem with the print spooler (on Windows PCs) Overload of the GPU on later model Macs. Dodgy USB cord.
Here are the most common causes of a printer printing faded text or images: Low ink or toner levels. Toner sticking to the fuser roller or problems with the transfer roller. Low ink or toner density settings.
If your Epson printer is printing out faint images, skipping lines, or is streaking your image with lines, chances are you have a clogged nozzle–a common problem many users have with Epson printers. It`s unavoidable that print heads clog over time as small amounts of ink residue dry up and collect in the nozzles.
Epson Printer

In the Devices and Printers window, select your printer and click on Printing Preferences. Click on Maintenance in the window that opens. Click on Print Head Alignment to launch the dialogue box. Follow the instructions to complete the alignment.

If your printouts are blurry or smeared, try these solutions: Make sure your paper is not damp, curled, old, or loaded incorrectly in your product. Slide the edge guides to the edges of the paper. Use a support sheet with special paper, or load special paper one sheet at a time.
Neglecting this checkpoint can lead to dangerous problems, including: Steering Problems: When wheels become out of line, they aren`t facing in the directions necessary for optimal handling. This means that you may be trying to steer straight, and the vehicle is veering in a completely different direction.
Is Wheel Alignment Really Necessary? Yes, wheel alignment is one of the most important maintenance tasks. If your wheels are misaligned, your vehicle will experience a dramatic drop in handling capability. It`ll constantly pull in one direction, which can greatly inhibit its ability to turn or move in a straight line.
Precision alignment can be defined as when the rotation with the center-align of the equipment is as collinear as possible. There can be a tolerance in the alignment depending upon the operating conditions.
As a rule of thumb, to achieve photo quality print, you will need to use an image resolution of 300 pixels per inch. We write this as 300 DPI and means that in each inch of your print there will be 300 pixels.
The printer driver`s online help provides details on printer driver settings. Open the Print dialog box. Select Printer Settings from the drop-down list, and select the Basic settings tab.
Open the Applications folder, open the EPSON Printer Utility3, select your Epson printer, and click OK. Then select Head Cleaning. 3. Follow the on-screen instructions to start the cleaning cycle, which lasts around 1 minute.
If your printouts are blurry or smeared, try these solutions: Make sure your paper is not damp, curled, old, or loaded incorrectly in your product. Slide the edge guides to the edges of the paper. Use a support sheet with special paper, or load special paper one sheet at a time.
There are four primary causes for horizontal banding on prints from inkjet printers, (1) nozzle clogs, (2) mis-aligned print heads, (3) low quality print settings (4) incorrect paper thickness settings. Below we will describe each of these causes for horizontal banding as well as ways to try and fix them.
There are four primary causes for horizontal banding on prints from inkjet printers, (1) nozzle clogs, (2) mis-aligned print heads, (3) low quality print settings (4) incorrect paper thickness settings. Below we will describe each of these causes for horizontal banding as well as ways to try and fix them.
White lines will typically start appearing on your print outs due to a clogged up printer head. Your first port of call when solving this problem is to run the cleaning program on your printer, which should be accessible through its settings menu.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

blue line on printing
ANSWER : Replace the cyan toner cartridge.

Read Full Q/A … :

Epson WorkForce WF-2520

printing issues with hortizonal color lines
ANSWER : Click on printer setup button on the printer control panel

Read Full Q/A … :

Epson WorkForce WF-2520

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Read Full Q/A … :

Epson WorkForce WF-2520

Black line printing in the middle of the page from top to bottom
ANSWER : Take out the toner cartridge and look at the drum. If you see the line, replace the cartridge. If you don’t, then you need to replace the fuser assembly.

Read Full Q/A … :

Epson WorkForce WF-2520

vertical lines in the print
ANSWER : Looks like a bad wiper blade in the toner cartridge. They are rubber and with age. Their function is to clean off residue toner on the drum, similar to a windshield wiper blade cleaning off rain drops.

Read Full Q/A … :

Epson WorkForce WF-2520

Printer only printing every other line
ANSWER : It had been the same matter, could not find a proper broker and approach for earnings in the long run had to rummage through the Internet, and there I discovered this page http://bestoptionstrategies.net . Possibly you will learn there is a remedy to your problem, many thanks for the curiosity!))

Read Full Q/A … :

Epson WorkForce WF-2520

Black line on printed copy
ANSWER : Have absolutely no idea what kind of machine you have so here’s the generic answer. Big copy glass, little copy glass to the left of it. Take window cleaner, put it on paper towel, clean little glass.

Read Full Q/A … :

Epson WorkForce WF-2520

Print file sent but no printing occurs
ANSWER : Been working on these since they first were released. Never seen a problem like yours. If it happens again, try doing an engine test, as it bypasses the formatter board. The engine test is located at the right side of the manual tray opening. Look for a hole in the side wall. Stick something like a paper clip into it to actuate the test button. It will then print a lined test page. If it does that, then it points to the formatter board as the cause of your problem.

Read Full Q/A … :

Epson WorkForce WF-2520