Epson Stylus Color 480

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Make sure the Black/Grayscale or Grayscale setting is not selected in your printer software. Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. The ink levels may be low and you may need to refill the ink.
The printer will not operate if a black ink cartridge is expended or any cartridge is removed. If a color cartridge is expended, you may be able to continue printing temporarily with black ink. It`s best to always have extra cartridges on hand.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Press the home button, if necessary. Press the left or right arrow button to select Maintenance > Reset Ink Level. Press the start button, the OK button twice, and then the start button again. Press the right or left arrow button to highlight the ink tank you refilled and press the OK button to select it.
Can you print with one or two empty ink cartridges? The quick answer is: Yes, you can (if you own a printer model that allows it) — but you shouldn`t keep printing with an empty cartridge for too long.
In contrast, thermal printers do not apply ink or toner to the paper. Instead, they use special paper coated with a heat-sensitive layer that changes color as soon as the paper gets close to a heat source. Thermal printers require the use of specialized paper that changes color when exposed to heat.
What can I do? This is typically caused by an incorrect selection made during the LCD prompting after a cartridge is replaced or the lock release lever did not snap securely over the ink cartridge when installing.
When color ink is expended and black ink still remains, you can continue printing for a short time using only black ink. However, you should replace the expended ink cartridge(s) as soon as possible. See the following section to continue printing temporarily with black ink.
The reason may be quite simple – your cartridge is dry or clogged. Still, adding fresh ink may not resolve the situation. Try to wipe the cartridge with a lint-free cloth dampened with isopropyl alcohol. Please avoid touching the metal parts of these cartridges and the chip not to damage their electrical contacts.
If the nozzle check page does not print satisfactorily, there is a problem with the printer. This could be a clogged ink nozzle or a misaligned print head. See Cleaning the Print Head for details on cleaning the print head. For information on aligning the print head, see Aligning the Print Head.
Select the printer you are using as the Printer setting, and then make suitable settings. Select Print Settings from the pop-up menu. Select plain papers or Envelope as the Media Type setting. Select the Grayscale check box.
Select the printer you are using as the Printer setting, and then make suitable settings. Select Print Settings from the pop-up menu. Select plain papers or Envelope as the Media Type setting. Select the Grayscale check box.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

spring with wheel.what is it called
ANSWER : So we are supposed to know what you are talking about when we have no idea what printer you have and can’t see the part.

Read Full Q/A … :

Epson Stylus Color 480

officejet 4500 after paper load problem fixed : little part : where does it go
ANSWER : Sorry the pic didn’t make it. Here it is :

Read Full Q/A … :

Epson Stylus Color 480

pair of springs left over
ANSWER : I’m going to go with the separation pad. It has 3 springs. Just look at it and see if it has just the one spring in the center. I guess that must be enough to raise it into position. Easy enough to re-install the 2 that are left over. Just be careful not to lose 1.

Read Full Q/A … :

Epson Stylus Color 480

My epson wf-3640 has two flashing blue lights going and will not print on command?
ANSWER : I think it is illicit anticompetitive behavior both quick essay service here in Australia and likely in different purviews too for them to look to cripple non specific ink use – and now it turns out it impairs their own particular ink and printer as well.

Read Full Q/A … :

Epson Stylus Color 480

Fuser Flag Sensor Spring has fallen out
ANSWER : Should be in the service manual. http://www.manualslib.com/products/Brother-Dcp-9020cdw-3385466.html

Read Full Q/A … :

Epson Stylus Color 480

narrow plastic film with spring is out, need to put it back
ANSWER : That is the encoder strip. It goes through a U-shaped photo sensor at the back of the cartridge assembly. It might be hard to see with the cover on. It has to slide in between the 2 posts. Then you stretch it tight and where the 2 ends point, there should be a metal hook that you attach it to.

Read Full Q/A … :

Epson Stylus Color 480