Epson WorkForce WF-2530
By the way my wf-2630 is not listed above..The machine will not answer incoming calls.

Experienced technical support provide their insights in answering this question :
On the Epson WF all-in-ones you can set the FAX to automatically answer, answer after a certain number of rings (in case you have an answering machine), or to manually answer. Chaeck to make sure it is not set to manually answer…my WF reset to that and I spent a while trying to find out what was wrong with the cables, etc.

How to Identify and Fix Common printer Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Make sure your printer is on. Check if the cable is properly connected from the computer to your Epson printer. If you are using wifi, check if the devices are connected to the same network. Check for ink levels or paper jams.
Make sure the mobile device`s Bluetooth is turned on. Check to see if the printer`s Bluetooth light is pulsing. If not, enable Bluetooth on the printer and try pairing with the printer again. Check if the printer is communicating with another mobile device.
Do a hard reset on your printer. To do this you just need to turn off your printer, unplug for a few minutes and then plug the printer again. If that still doesn`t work, try turning the printer and your computer off, and then start it back up again. Try uninstalling and then reinstalling your printer driver.
Restart your printer, router, and mobile device

Turn off the printer, and then turn it on again. Disconnect the power cable from the router, wait ten seconds, reconnect the cable, and then wait for the internet connection to complete. Turn off your phone or tablet, and then turn it on again.

The interface cable may not be plugged in securely. Check both ends of the interface cable between the printer and the computer. You may not be using the correct interface cable. If you are using the USB interface, use a Revision 1.1 or 2.0 cable.
You can connect a mobile device directly to the printer without a wireless router or access point. Note: Make sure the Epson Smart Panel app is installed on your mobile device before connecting to the printer. Press the home button, if necessary. Use the arrow buttons to select the icon and press the OK button.
It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.
The printer driver`s online help provides details on printer driver settings. Open the Print dialog box. Select Printer Settings from the drop-down list, and select the Basic settings tab.
Some of the most common printer problems that most of us have experienced include paper jamming, slow printing, uneven printing, and wrong colour output. If you use your printer frequently, we know how annoying it can be to have persisting problems with the printer.
Open the Windows Control Panel and navigate to Hardware and Sound | Devices and Printers. This screen will show you all of the printers that are installed. Right-click on the printer that is experiencing problems, and then select the Troubleshoot command from the shortcut menu.
The answer: A) Print a Windows Printer Test Page

Before making any changes, it`s always important to completely assess the scope of the problem.

Check cables or wireless connection

Make sure that the printer`s USB cable is properly connected from the printer to your PC. If your USB isn`t recognized, see Automatically diagnose and fix Windows USB problems. Check the wireless connection (for wireless printers).

Click the start button, and then select Epson Software > Epson Printer Connection Checker. Enter the application name in the search charm, and then select the displayed icon. Click the start button, and then select All Programs > Epson Software > Epson Printer Connection Checker.
To print from an iPhone or iPad with a printer that can`t connect wirelessly, you`ll have to use a piece of hardware as the go-between. You`ll need a USB cable and a USB OTG (on-the-go) adapter that connects your iPhone to the USB cable.
Hold down the network status button for about seven seconds to print a network status sheet. Use your computer or wireless device to select the Wi-Fi network name (SSID) and password listed in the Wi-Fi Direct section of the network status sheet.
Resetting and configuring your Epson printer is an effective way to start from scratch and troubleshoot lingering printer issues.
The reset key is a single use key and once used cannot be used again. All EPSON printers have inbuilt counters that count up the number of pages a printer produces, the number of head cleans executed and various other attributes. Once a critical level is reached the printer will enter its service mode.
This error occurs if the firmware update procedure is interrupted, e.g. an accidental powering off of the product, cables being removed, or the installation being canceled. To recover from this error, Epson will instruct customers to update their printers with the latest version of the firmware.
If you set a Epson Web Control password and forgot the user ID or password, try entering the following: User ID: EPSONWEB. Default password: admin.
Scan the QR code with the camera app on your device and follow the instructions on your device. Press the OK button. For Android devices, select Android and press the OK button. Open the Epson iPrint app on your device and select the product you want to connect to.
You first need to make sure your printer is within Bluetooth range, and then go to your phone`s settings and select `Bluetooth. ` It`s as simple as selecting your printer, and you`re done. By opening the file and selecting `Print`, you can print any document or photo stored on your device.
Do one of the following: Windows 10: Right-click and select Control Panel > Hardware and Sound > Devices and Printers. Right-click your product name and select Printer properties.
Windows 10: From the Start button, click All apps → Brother → Label & Mobile Printer → Printer Setting Tool. Windows 8, Windows 8.1: On the Apps screen, click Printer Setting Tool.
Select Start > Settings . Go to Devices > Printers & scanners > select a printer > Manage. Then select Set as default. If you don`t see the Set as default option, the Let Windows manage my default printer option may be selected.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

WF-2630 will not answer incoming calls
ANSWER : On the Epson WF all-in-ones you can set the FAX to automatically answer, answer after a certain number of rings (in case you have an answering machine), or to manually answer. Chaeck to make sure it is not set to manually answer…my WF reset to that and I spent a while trying to find out what was wrong with the cables, etc.

Read Full Q/A … :

Epson WorkForce WF-2530

HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr

Read Full Q/A … :

Epson WorkForce WF-2530

spring with wheel.what is it called
ANSWER : So we are supposed to know what you are talking about when we have no idea what printer you have and can’t see the part.

Read Full Q/A … :

Epson WorkForce WF-2530

Brother HL-1650 Service Call Error E50
ANSWER : Thanks to vikas on Sep 15, 2005 at 9:09am

Read Full Q/A … :

Epson WorkForce WF-2530