Apple StyleWriter I

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

To change the orientation to Landscape, go to the File menu – Print – Print then click on the Show Details button and from Orientation choose the second option.
To change the default paper size for printing, click the Apple menu → click System Preferences → click Printers & Scanners → click the Default Paper Size menu and choose your new size.
Click Start, point to Settings, and the click Printers. Right-click the appropriate printer, and then click Properties. Click the Paper tab, and then click the paper size you want to use in the Paper Size box.
Place the “Zero” end of your ruler at one end of your print (the “Zero” end is usually on the left side of the ruler). Make sure the end of your ruler is flush (in line) with your print. Adjust your ruler so that it is aligned with your print. Move to the opposite side of the print you are measuring and read the ruler.
Change the page orientation when you are ready to print

, and then click Print. In the Print dialog box, click Properties. In the printer properties dialog box, in the Layout tab, under Orientation, click Portrait or Landscape, and click OK. When you are ready to print, click Print.

4×6 prints are perfect for framed photos, cards and for a physical backup of any of your favorite digital images. 5×7: A slightly larger format than standard 4×6 images, 5×7 prints have a higher aspect ratio than 4×6 prints, so cropping your image to your personal specifications is important!
On the Page Layout tab, in the Page Setup group, click Margins. Do one of the following: To use predefined margins, click Normal, Wide, or Narrow.
2) Go to File -> Print… and then change the Scale (%) so that the image is the desired size. If you do not see the place to change the Scale, you may need to press the Show Details button. Safari will show you a preview of how the image will appear on each page, so you can see how big the resulting image will be.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Print file sent but no printing occurs
ANSWER : Been working on these since they first were released. Never seen a problem like yours. If it happens again, try doing an engine test, as it bypasses the formatter board. The engine test is located at the right side of the manual tray opening. Look for a hole in the side wall. Stick something like a paper clip into it to actuate the test button. It will then print a lined test page. If it does that, then it points to the formatter board as the cause of your problem.

Read Full Q/A … :

Apple StyleWriter I

PGBK printing only half a band
ANSWER : You can try flushing the head under hot tap water. Take the print tanks out and flip the plastic release lever to the right of the assy. up. That will release the head. Reach in and pull it out and take it over to the sink. Run the water through the screens and flip it over and run it on the heads. Repeat several times and reinstall.

Read Full Q/A … :

Apple StyleWriter I

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Read Full Q/A … :

Apple StyleWriter I

vertical lines in the print
ANSWER : Looks like a bad wiper blade in the toner cartridge. They are rubber and with age. Their function is to clean off residue toner on the drum, similar to a windshield wiper blade cleaning off rain drops.

Read Full Q/A … :

Apple StyleWriter I

Prints blank pages, won't print from computer
ANSWER : Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.

Read Full Q/A … :

Apple StyleWriter I

Darker (not black) vertical band about 3/8" wide 3 1/2" from left edge only on odd sheets and only in duplex mode
ANSWER : If you are using letter sized paper, then this is a horizontal band since the paper feeds in landscape mode. Either way it is a really odd problem. There is no way it could be either the fuser or the toner as both of those would consistently do the problem, not intermittently. Also, does the band go all the way across the page or does it have borders on either end.

Read Full Q/A … :

Apple StyleWriter I

PGBK shows no band on test print;
ANSWER : Take out all the inks. On the right side of the cartridge assy. you will see a plastic lever. Lift it up and reach inside and remove the printhead assy. Take it over to the sink and run hot water into the black screen on top to flush out the dried ink. Then flip it over and run hot water on the print heads. Do it for about a minute for each side and then repeat. Blot it dry with a paper towel. Reinstall and try it again.

Read Full Q/A … :

Apple StyleWriter I

Magenta bands (wide) on Epson R1800 6×4 prints
ANSWER : These printers are meant to be good for the fashion and it could be more meaningful for the people and they can use it for many purpose. Jack peralta black jacket

Read Full Q/A … :

Apple StyleWriter I