Epson Stylus C42

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

You can also tell which cartridge is empty by checking the speed at which the error light flashes when the print head moves to the ink cartridge replacement position. See the table below. Replace the black ink cartridge if the error light flashes at the same speed as the power light.
The printer will not operate if a black ink cartridge is expended or any cartridge is removed. If a color cartridge is expended, you may be able to continue printing temporarily with black ink. It`s best to always have extra cartridges on hand.
Step 1: Unplug your Epson printer. Step 2: Use your computer to process a printing job before turning your printer on again. Step 3: Plug in your Epson printer. Step 4: This process will override the ink cartridge settings and print out the document.
The quick answer is: Yes, you can (if you own a printer model that allows it) — but you shouldn`t keep printing with an empty cartridge for too long. Why? Because running on an empty cartridge for too long can cause your printhead to overheat resulting in irreversible printer damage.
Click the start menu and search for `Devices and Printers`. Select devices and printers in the search bar. This will allow you to see the printers connected to the computer. Click the printer you want to check, and you`ll see the ink levels at the bottom of the devices and printers section.
Recycle in-store

Many places accept your used ink cartridges for recycling. Several of the major “big box” retailers have ink disposal containers near where they sell their ink. Office supply stores also have recycling boxes or stations that accept almost every type of inkjet and toner cartridge.

Ink cartridges can dry out over time. If they are sitting in your machine for an extended period, they will eventually dry up and become unusable. The simplest way to combat this problem is by printing more frequently or running regular cleans and ink tests to ensure the nozzles remain clean.
Until the print head wears out you can continue to recycle your empty cartridges. Generally, you can expect to refill your empty OEM cartridge between 2-6 times.
Hey, you can reset Epson ink cartridge without resetter! As shown above, you can reset Epson chips by pressing and holding the button above the chip with a bent paper clip for 10 seconds.
Do not try to remove the plastic square covering the round ink port located at the bottom front. This plastic square will be punctured by the printer head when you put the cartridge into the proper slot.
When color ink is expended and black ink still remains, you can continue printing for a short time using only black ink. However, you should replace the expended ink cartridge(s) as soon as possible.
If an ink cartridge is unopened or not used, so long as it`s kept away from humid environments, it should last at least 2 years.
Ink cartridges can last about two years if they`re properly packed and stored. After two years, you may still be able to use them. But, they can begin drying out and cause some potential issues if you use them on printers, such as getting a dried printhead. An opened ink cartridge can only live for about six months.
Faint, streaky or spotty prints are all common signs of a clog but a simple cleaning can usually get your HP ink cartridges working again. Printheads clog due to infrequent cartridge use. If you regularly go a few weeks without printing, your cartridges will eventually dry out and need to be replaced.
To improve print quality for an integrated ink cartridge, you may need to clean the nozzle plate and/or rear electrical contacts. Using an isopropyl alcohol dampened lint-free moist cloth, gently blot the nozzle plate until some ink is drawn out and absorbed into the cloth.
Black – 5000 pages & color 7000 pages @ standard coverage area.
To maintain print quality, you must do the following: Shake the White ink cartridges at the start of every working day. Shake the color ink cartridges at least once a month.
DURABrite Inks are featured in the Epson printers and all-in-ones designed for dedicated productivity. DURABrite Inks are water-, smudge-, and fade-resistant on all supported papers—plain, matte, and glossy.
Install the bottle cap tightly; otherwise, ink may leak. Refill the ink tank with the correct color ink up to the upper line on the ink tank. If any ink remains in the ink bottle after filling the ink tank, place the bottle cap tip securely on the bottle cap and store the ink bottle upright for later use.
While toner cartridges are commonly refilled with results reported to be good, in at least some cases refilling without full remanufacturing may leave waste toner from each print and paper debris in the cartridge, potentially causing backgrounding problems and producing contamination in the refilled cartridge.
There are chips inside the original cartridges to record how many pages were printed and they cannot be reset. As a result the printer reads the chips and tells you that the cartridges are empty, even though they are not. This is why you are getting the “ink low” message even though the ink tank is at full capacity.
Press the left or right arrow button to select Maintenance > Reset Ink Level. Press the start button, the OK button twice, and then the start button again. Press the right or left arrow button to highlight the ink tank you refilled and press the OK button to select it. Repeat for each ink tank color you refilled.
The chip resetter tool is a self-contained unit that contacts the cartridge chip to get it to its electronic full setting, telling the printer it is full of ink and ready to print. It is generally used when re-inking a cartridge, because the cartridges must be removed from the printer to complete the process.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson Stylus C42

Epson, sudden cannot recognise cartridges error
ANSWER : Hi, I have exactly the same problem than you, I’ve been trying to solve it since 6 months. I have an Artisan PX730 WD, and the genuine cartridge can’t be recognized all together. And status monitor indicates same thing than you.

Read Full Q/A … :

Epson Stylus C42

Tell me the best aleternative option of Epson Expression XP-400 ink cartridges ?
ANSWER : I’ve had good success with www.ccs-digital.com products

Read Full Q/A … :

Epson Stylus C42

Epson R300 ink cartridge cannot be recognized HELP
ANSWER : Hi Donna

Read Full Q/A … :

Epson Stylus C42

Epson ink cartridge leaking?
ANSWER : Posting this cause it worked for me. I have an Artisan 837 that was leaving pools of blue on the page. I tried Epson’s recommendation of cleaning the print path by pressing the copy button on the control panel (with nothing on the flatbed). Printed 5 pages and the last 2 were clean. Did a test print and the problem was back. Repeated a few times with the problem reocccuring. Switched out the cartridge. no better and now the printer doesn’t recognize its own brand cartridge. Yet, it accepts the 3rd party one.

Read Full Q/A … :

Epson Stylus C42

Epson RX620 Ink cartridges cannot be recognized
ANSWER : Hd snapping the ink cartridges in better, as per other people’s instructions, and no go. I got all frustrated, banged the printer’s side, and reposed in and out the dang cartridges and nada. Got all pissy and told the printer to Proceed with low Levels. I clicked Print and then when the epson printer icon came on, I clicked on settings and Ink supply levels. In here, it said my YELLOW ink was low, and yet on my epson printer screen, it kept saying my black levels were low. wtf. i had an extra yellow as I hadn’t changed it out with the cyan and blue and yep, all working now. geez. try your computer instead of the printer!!

Read Full Q/A … :

Epson Stylus C42

run with empty ink cartridge
ANSWER : The only way is to buy a chip resetter and reset the chip on the cartridge. You can find them online for about $5. You just hold it against the cartridge until the light turns green. You do run the risk of damaging the printhead due to overheating because of no ink in it.

Read Full Q/A … :

Epson Stylus C42

Epson R3000 Inkjets Clogged
ANSWER : If you haven’t yet destroyed your printer or turned it into a paper weight, check this out:

Read Full Q/A … :

Epson Stylus C42