Brother Compactronic I

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Brother printers often fail to connect due to a faulty or broken USB port. For those using a wireless printer, it`s vital that both the device you`re using and the printer are connected to the same Wi-Fi network. However, if your Wi-Fi connection is poor, then it`s worth considering going elsewhere to sort the issue.
An error in the cartridges, the heads clogged by dry ink, a very low level in your consumables, a bad connection between the computer and the printer, a damaged cable, a jam in the print queue…, there are many reasons why your Brother printer may stop printing or print poorly even though you have not jumped the ink …
Check and repair your wireless connection. Make sure your Brother machine is correctly connected to the network. The network connection between your computer and the wireless router may be unavailable or set up incorrectly.
Among the more common technical issues that may bring down a printer are disconnected cables, malfunctioning routers, and low ink levels. Moreover, software problems such as interrupted connections or incorrect settings in your system`s drivers can also cause your printer to show up as offline.
Brother printer error

The Drum Error is another common error experienced by users of Brother printers. Both the error message “Drum Error” and “Clean Drum Unit” mean that the drum unit of your machine is dirty. The dirt may be caused by dust or by loose toner.

Do a hard reset on your printer. To do this you just need to turn off your printer, unplug for a few minutes and then plug the printer again. If that still doesn`t work, try turning the printer and your computer off, and then start it back up again. Try uninstalling and then reinstalling your printer driver.
Primary causes include grime, dust, worn rollers, or incorrect paper weight.
a misprint or misspelling in a text.
Error code 55 and the error message “Replace Laser Unit” are common for Brother printers. The error code appears on the display when the laser unit has reached the end of its life cycle. It is necessary to replace the laser unit every once in a while, because worn laser units will lead to a poor printing quality.
Do a hard reset on your printer. To do this you just need to turn off your printer, unplug for a few minutes and then plug the printer again. If that still doesn`t work, try turning the printer and your computer off, and then start it back up again. Try uninstalling and then reinstalling your printer driver.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Brother HL-2170W — 2nd sheet printing causes jam
ANSWER : I tried Angry Larry’s link to Photobucket but there’s an error message. I tried rocklobster’s link to Imageshack, but it’s for a different printer. Can someone please send me the photos to fix this issue with my Brother HL-2170W? My email is [email protected] Very much appreciated!

Read Full Q/A … :

Brother Compactronic I

Changing Language of Printer Brother MFC-J5910DW
ANSWER : I have a 2720DW from the netherlands it is a french model an it has the code 0009

Read Full Q/A … :

Brother Compactronic I

Brother MFC 8220
ANSWER : This problem is normally caused by the fuser. There’s a brown driver gear who frequently broke and you’ll be obliged to replce it to take care of the problem.

Read Full Q/A … :

Brother Compactronic I

Brother MFC-J6510DW extra paper tray.
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))

Read Full Q/A … :

Brother Compactronic I

4F displayed on Brother 990CW printer?
ANSWER : That’s a printhead error.

Read Full Q/A … :

Brother Compactronic I

Brother MFC-L2740DW maintenance mode
ANSWER : Hi,

Read Full Q/A … :

Brother Compactronic I

Brother J315W – paper misfeed
ANSWER : I have the same problem: whether printing or copying, the paper feeds almost up to the print head and then stops with a paper jam error. Can’t find any bits of paper stuck anywhere. Sure would appreciate some help. DCP-J315W

Read Full Q/A … :

Brother Compactronic I

Brother HL-2270dw Printer
ANSWER : maybe you can download here Brother HL-2270dw Driver Download

Read Full Q/A … :

Brother Compactronic I