There is a chip resetter if you can find someone who sells it. http://apexmic.info/how-to-reset-chip-dell-1250c.h…Otherwise, do a google search on dell 1250c reset chips. There are lots of suppliers.
How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
OEM toner cartridges are made by the company that makes the printers they fit in while generic toner cartridges are toner cartridges that third party manufacturers make for branded printers. Generic toner cartridges are actually cartridges that are compatible to the brand of printer you`re using.
How They Work. Toner chips read levels by monitoring your cartridge`s droplet count, or the number or ink droplets that have been used so far when printing. Chips are programmed for specific toner designs and will provide warnings and stop printing once a certain number of droplets have been used.
Restoring the factory-set defaults returns most of the settings to the factory defaults. It will not reset the page count, tray size, or language.
Using a Paperclip
You can use a paper clip to reset your Epson cartridge chip if there`s a single pinhole on the small green microchip on the bottom or side of the cartridge. If there are two round metal contacts at the top or bottom of the chip, you`ll actually need two paperclips.
However, there can be a difference between price and value. A compatible toner may be inconsistent and have a shorter lifespan. This means that while you pay less initially, you may end up buying more cartridges because they don`t last as long.
If your new compatible toner cartridge came without a chip, you will have to re-use the chip from the original HP toner that came with your printer in order to use the compatible toner. The cartridge will work fine EXCEPT the printer will not read the toner levels.
If a toner cartridge lacks a chip, it just means that the cartridge will be unable to communicate with the rest of the printer directly. Generally speaking, only third-party manufacturers make toner cartridges that lack a sensor chip.
Toner Recycling: What Gets Reused
Once a cartridge uses up all of its toner, no amount of recycling is going to produce new toner out of the plastic shell. Other parts that may be replaced during the remanufacturing process include the microchip that detects cartridge toner levels.
The toner collection unit is designed for a single use. Do not attempt to empty the toner collection unit and reuse it. Doing so could lead to toner being spilled inside the product, which could result in reduced print quality. After use, return the toner collection unit to HP`s Planet Partners program for recycling.
Reset. Resetting the printer stops printing and clears the current print job received from the active interface. You may want to reset the printer when there is a problem with the print job itself and the printer cannot print successfully.
Power down the printer and then unplug the power cord from the printer and the wall. Wait for a minute, then plug the printer back in. The printer will reset and turn on.
The chip on a printer cartridge helps monitor the ink levels in your cartridge so the printer can notify you when a cartridge is running low.
Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
Step 1: Unplug your Epson printer. Step 2: Use your computer to process a printing job before turning your printer on again. Step 3: Plug in your Epson printer. Step 4: This process will override the ink cartridge settings and print out the document.
Remove the cartridge indicated in the error message, and then insert the new cartridge into the slot. Repeat these steps to replace any other cartridges indicated in the error message. Close the door or lid to the cartridge access area, and then follow any instructions to align the printer.
Make sure the cartridge chip is clean, free of ink smear and debris. Verify that the cartridge is seated in the printer securely. Push it down hard until you hear a click.
4. Can you use generic ink in HP printers? Yes, you can use generic ink in HP printers. Try to disable the HP Cartridge protection as this will help with preventing the printers from being blocked with updates.
Genuine toner cartridges are higher quality products and come at higher price tags as a result. However, when you factor in the improved durability and higher page yields of genuine toners, they often turn out to be more cost effective over time.
As the name suggests, ink cartridges use liquid ink to create images and text on printed pages. Whereas toner cartridges use powder, which is heated to create printed documents. Much like the quality of petrol you put in your car, the ink and toner you use in your printer will help it run better for longer.
The difference in a toner to an ink cartridge is that toners contain colour powder instead of liquid ink. These are what are used in laser printers. A laser printer projects the document onto a part called the drum.
In the simple terms, original ink or toner cartridges are manufactured by the company who built your printer whereas a compatible cartridge is one that has been manufactured by a third party.
On your computer, in the Windows Notification Area (bottom-right corner of your Windows desktop), right-click the printer icon. In the printer menu, select the Properties or Preferences option. In the printer settings window, the ink or toner levels are displayed for the currently-installed cartridge(s).