Brother HL 2040
Can I use knock off toner cartridges and drums? Is it safe for my printer. I know it’s

Experienced technical support provide their insights in answering this question :
You can, but there are good knock-offs and bad ones. I’ve run into ones that come totally empty. Ones that don’t have the chips installed that identify themselves to the printer. Ones that have sat on a shelf for years and fail on installation. I could go on, but I’m sure you get the idea. I use http://directpreciseimaging.com/ Mostly because I set him up in business and he’s local to me. I have very few problems with his products.

How to Identify and Fix Common printer Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

15,000 pages (1 page/job). There are many factors that determine the actual drum life, such as the temperature, humidity, type of paper, type of toner used and so on. Under ideal conditions, the average drum life is estimated at approximately 15,000 pages.
The toner cartridge is the container that holds the toner powder. The drum unit is an electrically charged cylinder that fuses that toner powder onto paper to create text and images. Both of these components are essential for producing a print.
The toner cartridge and drum unit are different consumables. They are used in the Brother machine, and the machine requires both consumables.
The drum uses static electricity to attract powdered toner to the drums cylinder. The drum rolls the toner onto the paper in the form of your print. The toner is melted & pressed onto the paper by heat from a fuser as it passes through its rollers. Your print comes out of the printer.
The toner cartridge shelf life is 2 years if the protective bag is unopened or 6 months after the protective bag is opened.
The Brother machine will display a `Replace Drum` or `Drum Stop` message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.
All laser printers require a toner cartridge and a drum unit to produce a print. However, some printers only need you to replace the toner cartridge, and others require that you regularly replace both the toner cartridge and the drum unit. Most printers use toner cartridges with the drum unit built into the cartridge.
Laser printers use a single drum, but may have more than one toner cartridge. Monochrome models use only black toner, and color laser printers have four cartridges: black, cyan, magenta and yellow. When used in combination, the printer produces all colors, hues and shades of gray.
You should replace it when your image quality declines and does not improve even after changing your toner. Or simply replace your drum when your printer notifies you to do so. When the replace drum light or message comes on, your printer might stop working without much notice.
Use an activated toner cloth, stretched tautly, and carefully wipe down the drum exterior to remove loose toner. Then use a cotton ball saturated with 99% pure isopropyl (rubbing) alcohol. Clean any patches of stubborn toner still attached to the drum. Use toner cloth or lint-free microfiber to clean the print rollers.
As the name suggests, ink cartridges use liquid ink to create images and text on printed pages. Whereas toner cartridges use powder, which is heated to create printed documents. Much like the quality of petrol you put in your car, the ink and toner you use in your printer will help it run better for longer.
Toner cartridges use laser technology to melt toner dust onto a page in order to create an image. Toner dust is very refined plastic that is used for printing.
Standard toner cartridges print approximately 1,500 A4 or Letter-size single-sided pages. Approx. cartridge yield is declared in accordance with ISO/IEC 19752. High yield toner cartridges print approximately 2,600 A4 or Letter-size single-sided pages.
Use only a cotton swab, or a dry lint-free cloth. We recommend placing the toner cartridge and drum unit assemblies on a clean, flat surface with disposable paper underneath it in case you accidentally spill or scatter toner.
The drum unit and toner cartridge shelf life is 2 years if the protective bag is unopened or 6 months after the protective bag is opened. Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges.
The most obvious sign that you have to finally replace some of your drums, drum heads, or even the entire drum kit, is that it`s simply too old and damaged, and the beats no longer sound like they used to.
The drum unit and toner cartridge shelf life is 2 years if the protective bag is unopened or 6 months after the protective bag is opened. Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges.
But the replacement of a drum unit is vital to laser printers` health. A degraded drum unit can cause streaks, smudges, and blank spots on your printed page even if you just inserted a new printer toner. While a broken drum unit won`t break your printer, it will just fail to stop printing at a certain point.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

toner cartrigdes and drums
ANSWER : You can, but there are good knock-offs and bad ones. I’ve run into ones that come totally empty. Ones that don’t have the chips installed that identify themselves to the printer. Ones that have sat on a shelf for years and fail on installation. I could go on, but I’m sure you get the idea. I use http://directpreciseimaging.com/ Mostly because I set him up in business and he’s local to me. I have very few problems with his products.

Read Full Q/A … :

Brother HL 2040

Brother toner cartridge low toner override
ANSWER : Thank you. You are a genius. Of course this is not a substitute for cartridge replacement but it is great for extending the life of the color cartridges and allowing you to continue to print until you can get new cartridges.

Read Full Q/A … :

Brother HL 2040

oki c511 drum reset, toner reset, turkey chip reset
ANSWER : If you switch off toner control, you should keep an eye on your prints, and we aware of ink quality, so filling colours as they’re emptying. Nevertheless, it’s an small disturb for the a,ount of money you’re saving ┬┐isn’t it?

Read Full Q/A … :

Brother HL 2040

RESET OKIDATA TONER DRUM
ANSWER : Hi guys

Read Full Q/A … :

Brother HL 2040

Toner drum blades.
ANSWER : http://www.partsmart-corp.com/wb-bx-wiper-blade-hp4vcanonbx/28395

Read Full Q/A … :

Brother HL 2040

reset toners and image drum life
ANSWER : They both have chips that need to be replaced. There are videos on YouTube that show how to refill the toners and how to replace the chips.

Read Full Q/A … :

Brother HL 2040

RESET OKIDATA TONER DRUM
ANSWER : HI there, oki image drums contain a fuse. You can reset them if they are working/printing ok by replacing the fuse. Hope this helps. The fuse is located inside the unit so is a bit fiddly.

Read Full Q/A … :

Brother HL 2040

Toner dots fused to drum
ANSWER : You can try alcohol on a cotton pad to remove the toner. Wipe dry afterwards. If the drum does not have nicks in the coating, it should be OK.

Read Full Q/A … :

Brother HL 2040