Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

When “Toner Low” is displayed, prepare a new toner cartridge. If you do not have a new toner cartridge at hand and need printing before obtaining it, you can continue printing about 20 pages(*1) by opening and closing the front cover or the output tray. Print quality is not guaranteed.
Without a microchip, the cartridge can`t communicate with the copier. This means you can expect a change to your copier`s user experience; when loading a chip-less cartridge into a Canon copier, the copier will provide you with a warning that the toner isn`t produced by Canon.
Each toner cartridge typically has a number printed on it somewhere. You can remove the cartridge from the printer to find this number. Alternatively, you can look for the cartridge number or type in your printer`s manual or online by doing a search for your printer`s model number.
The most common reason a refilled ink cartridge does not work is that you didn`t reinstall the cartridge properly. Check the cartridge and make sure it is not dislodged or misaligned. If there is no visible sign of misinstallation, remove the cartridge and reinstall it.
The ink cartridges may not have been installed using the correct procedure, or they may not be seated correctly.
Can you print with one or two empty ink cartridges? The quick answer is: Yes, you can (if you own a printer model that allows it) — but you shouldn`t keep printing with an empty cartridge for too long.
The answer is, it depends on the type of laser printer you have. But most modern laser printers will not allow you to go ahead to print in this scenario. This is because the other colors are used to give clarity to the black printout to make it more legible.
Printer damage – Refilling cartridges without taking professional help can increase the risk of causing permanent damage to your printer. It could either leak or clog your print head. And while refilling cartridges, if you break your printer by any chance, it could also void your printer warranty.
Image by Brusspup. Press the tiny reset button located beside the chip and hold for 10 seconds. Depending on the brand and model of the cartridge, you may not need to hold the button for 10 seconds, but it won`t harm the cartridge so do it anyway just to be safe.
What is a Compatible Toner Cartridge? A compatible toner cartridge a generic cartridge made by a third-party manufacturer from parts compatible with your printer. In some places, compatible toner is also called clone toner as they are essentially an off-brand copy of the OEM cartridges.
While toner lasts longer than the printing ink used in inkjet printers, a toner cartridge has a finite shelf life and should be used before it goes bad. Using toner after its expiration date has passed can have negative effects on your print jobs and the devices they`re used in.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
Missing colours, streaky prints, smudges and ink blotches are all signs that your printer ink or toner cartridge may be damaged. Some printers will actually warn you if a cartridge is damaged and will refuse to print. This includes HP ink cartridges, Samsung toner cartridges and Canon ink cartridges.
First, remove and reinstall the designated cartridge 2-3 times until it securely sits in the slot to overcome an HP printer cartridge error. Next, turn off the printer and take out all the cartridges. Gently wipe the cartridge and carriage contacts with a dry, lint-free cloth and reinstall again.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
Press the button on the chip-reset tool for several seconds until the LED light on the device goes off. Then, unlock the reset tool from the cartridge. Use the resetter with other cartridges and install them back into the corresponding slots in your printer. Voila!

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Brother toner cartridge low toner override
ANSWER : Thank you. You are a genius. Of course this is not a substitute for cartridge replacement but it is great for extending the life of the color cartridges and allowing you to continue to print until you can get new cartridges.

Read Full Q/A … :
Unknown Printer

Brother toner cartridge low toner override
ANSWER : follow these steps:

Read Full Q/A … :
Unknown Printer

Inkjet Cartridges and Toner Refilling Instructions
ANSWER : Step 1: What you require. Printer-ink. You can purchase it from a PC store. …

Read Full Q/A … :
Unknown Printer

Chatter from toner cartridges before printing
ANSWER : The video may have the answer you want

Read Full Q/A … :
Unknown Printer

Waste Toner Cartridge is empty but printer is still telling me to replace it
ANSWER : All of the ones I’ve seen are optical. Light shines through a transparent section of the waste box onto a photocell. If toner builds up past that area, it gives a warning to replace it. Possibly toner dust has gotten on the photocell.

Read Full Q/A … :
Unknown Printer

I replaced the black toner cartridge and now the printer shakes though it is fine when I set it for grayscale only prints
ANSWER : You need to unlock the carousel. Once you unlock it and remove the toners, ignore all the rest of the crap. Pick any color and align the cartridge slot on the left side like you would have it to remove the cartridge. Then pull out on the gear towards you on the right and drop it so the right slot is lined up as well. You can get it aligned pretty close by just eyeballing it visually. I’ve never seen the left side go out of alignment, just the right, so this method has worked for me everytime.

Read Full Q/A … :
Unknown Printer

Toner cartridge full, printer displays: "empty needs replacing"
ANSWER : I once went to a customer who had a similar issue. They had installed new cartridges and judging from the box, they looked OEM. Strange thing was they felt empty when lifted and they were missing the chip on the outside that tells the printer it is installed and keeps track of how many copies were printed with that cartridge. The printer has no other way of knowing if the cartridge is full or empty.

Read Full Q/A … :
Unknown Printer

paper jam under toner cartridge
ANSWER : http://www.fixyourownprinter.com/posts/76889

Read Full Q/A … :
Unknown Printer