stylus c80

Remove the cartridges from your printer – switch your printer off. Using a piece of damp kitchen roll, gently wipe the copper plate on the cartridge. Allow the chips to air dry. Once the chips are completely dry, re-install the cartridges into your printer and switch the printer back on.

Why is my Epson printer skipping lines when printing? Apart from a clogged printhead, one other potential culprit is the electronic connection of your cartridges with your printer. Try removing your cartridges from your printer, and then shutting your printer down.

Turn off the ink monitor by checking off the “Disable Epson Status Monitor” found within a box. And lastly, click “Save” and close the window. That`s about it the printer and the cloned ink cartridges can now start printing operation.

Using a clean, lint-free, and dry cloth, gently wipe the metallic contacts and the connection point. Make sure that all dirt and residue are wiped clean. Reload the new ink cartridge back into the printer. Turn on the printer and do a test print to see if the ink cartridge gets detected.

Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).

The most common reason a refilled ink cartridge does not work is that you didn`t reinstall the cartridge properly. Check the cartridge and make sure it is not dislodged or misaligned. If there is no visible sign of misinstallation, remove the cartridge and reinstall it.

Your Epson printer may have failed to recognize the new ink cartridge, or its ink level system has read it as empty. For numerous Epson printer models, there`s a way to bypass this built-in ink checking system through a quick cartridge reset. Raise the printer`s top cover and then hold the Ink button.

All cartridges must be installed with ink for printing and printer maintenance. For print quality, some ink remains in replaced cartridges. Designed for EPSON cartridges only: Other brands of ink supplies are not compatible and, if described as compatible, may not function properly or continuously.

Method 1 – Bypassng Ink Cartridge on Epson Printer

After opening the lid, hold the ink button down. When you find the ink holer is moving to its position, then open the cartridge`s lid which is having no ink. Close it again without removing the cartridge. Close the lid and start to print.

Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.

Reset Button Models

It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.

Select Print Settings from the pop-up menu. Select plain papers or Envelope as the Media Type setting. Select the Grayscale check box. Click Print to close the Print dialog box.

Disable the Cartridge Policy feature

In the Device Management pane, select the printers (or printer group) to configure. In the bottom navigation pane, select Config, and then select Supplies. In the Cartridge Policy section, select Off. Click Apply.