Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

A blue or green light indicates the printer is operating correctly, while a red light indicates an error has occurred.
Status Indicator light glows solid red

The printer is in an error state. Disconnect the power cord or power bank from the printer, and then wait 30 seconds. note: A reset does not clear any personalized settings, such as custom names or colors.

When your printer displays a solid red LED light this might indicate the paper failed to pass through the first sensor or paper feed area. Use the steps to resolve paper jams in the tray. Open the paper tray. If jammed paper is visible, gently remove jammed paper.
Blinking Red LED —- Indicates [Near end], [Ink end] or [Expiration], ink expiration date is approaching.
Print blemishes after inserting a new cartridge. Slow print times. Abnormal noises. Paper jams and ripped paper.
that is the touchpad button… the pin hole is the button… if you tap it twice the color will change…. that turns the touchpad on or off… On my DV7 that switch turns off the touchpad. If you use a wireless mouse you can turn it off. I have an HP G62 laptop fyi.
Most of the time, the flashing red light indicates that you are running low on paper. If the paper is not running low, make sure that the roll is pushed all the way to the back of the printer.
Reconnect the cable (network or USB) to the printer and try to print out a label. If the LED lamp flashes in red, try another cable or another network outlet or USB port of the computer. Try to uninstall the printer driver and then reinstall it.
The charge indicator will light red while the battery pack is charging. It will change to green when the charge is complete. After charging, unplug the battery charger and remove the battery pack.
The average lifespan of a printer is around 3-5 years. With proper upkeep and maintenance, some printers can last longer, but eventually your machine will need an upgrade.
A pointing stick (or trackpoint, also referred to generically as a nub or nipple) is a small analog stick used as a pointing device typically mounted centrally in a computer keyboard.
Red light and sleep

The theory is that red light wavelengths stimulate the production of melatonin. Melatonin is a naturally occurring hormone that helps you sleep. Your brain releases more melatonin as darkness falls and tends to release less when you`re exposed to light.

On a solid red light, most people understand they must wait until the light turns green to proceed through the light. But in contrast, a flashing red light allows the driver to proceed through the light when it is clear and safe to do so. This way, a flashing red light functions more like a stop sign.
Sometimes a printer will indicate a red light when the readjust paper bar is not in its ideal place. Here you have to ensure that it is appropriately placed and you can also establish the change bar for the density of the paper. After securing the right position of bar press “push the paper” button.
In the majority of cases, printers` self-cleaning mechanisms clean blocked printer heads by flushing the nozzles with air. The air works to dislodge dry ink inside the cartridge channels and also push it out. The intensity of the self-cleaning process of printers is usually not very strong.
The optical sensor calibrates the printer to the specific ink cartridges and print heads, which eliminates the need for customers to manually calibrate the printer. The sensor also ensures the printer is properly calibrated to the print head nozzles to deliver optimal print quality.
A red light on the Blink Mini shows when the camera is not connected to the internet. As a first step, unplug and plug-in the Mini camera. If the Mini was already connected to your network, the red LED changes to solid blue and blinking green lights as the Mini reconnects.
Press the [ ], [ ] buttons or turn the [ ] dial to select the [ – 3 ] tab. Press the [ ], [ ] buttons or turn the [ ] dial to choose [AF-assist beam (LED) firing] and then press the [ ] button. 4. Press the [ ], [ ] buttons or turn the [ ] dial to choose [Disable], and then press the [ ] button.
Connect the positive lead from the car battery charger to the positive terminal on your battery. This will likely be red with a plus sign. Connect the negative lead from the car battery charger to the negative terminal on your battery. This will likely be black with a minus sign.
For healthier print heads and more efficient ink consumption, however, it`s better to leave your printer on. Constantly switching your printer off and on will decrease your printer`s lifespan, so try to keep the off/on to a minimum.
For inkjet printer owners, a dormant printer can quickly be a problem if you forgo printing for even a short period of time. Printer cartridges can dry out, the printhead can clog, and inevitably, you have to invest in a new set of pricey replacement cartridges.
Here`s a little-known fact about printers: Almost all printers built in the last 30 years or so have built-in memory. In fact, most printers have many of the same features found in computers and mobile devices—hard drives, system memory, operating systems and applications.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT

Read Full Q/A … :
Unknown Printer

Xerox Phaser 3250 solid red light with no apparent reason
ANSWER : I found the problem to be a fuser. For $150 you can fix this issue. Cheaper to buy a new unit.

Read Full Q/A … :
Unknown Printer

Red Status light stays on
ANSWER : I’ll add that it’s hooked up to a winXP laptop via USB, with the factory-supplied disc installed, and I have the crossover net cable for it, also.

Read Full Q/A … :
Unknown Printer

the indicator lamp below the ink indicator sign bottom is lighting red in colour rapidly.
ANSWER : We have free Trial Reset Key.

Read Full Q/A … :
Unknown Printer

Red Light – Please help!
ANSWER : Here is the vid:

Read Full Q/A … :
Unknown Printer

Just installed new epson ink and have red light on
ANSWER : t60 fatal error

Read Full Q/A … :
Unknown Printer

Epson Stylus C90 (Red Light Continuously Blinks)
ANSWER : It looks like General Error occurs. Check for foreign objects inside the printer which may block the movement of printhead carriage, paper feed, etc.

Read Full Q/A … :
Unknown Printer

Epson Stylus Photo R200 – flashing red lights
ANSWER : The R800 will flash the ink and paper lights alternately when the ink pads are assumed to be full from extensive head cleaning. Sometimes, if not always, the head will lock into place on the right side above the ink head cleaning sponges that release ink to the lower ink pads.To correct the problem you need to clean the sponge area, I use cotton swabs. If the head is locked to need to release the carriage lock with a screwdriver. This will require removing the cover, but not necessarily the bottom of the unit.There is a 179 page service manual available for download for $16.50. There are free downloads of this manual, but usually are missing the 100 pages.You can remove the cover by:1. Remove the three screws on the rear housing (One to the left of the power plug, one on the opposite side and one in the lower middle bottom.2. Remove the three screws inside the upper housing (Just under the lid where the hinge is).3. Remove the screw under the left and right side in back below the vents.4. In the back pull the white ribbon closest to you out of the block, do not try to remove the block itself.5. Place a screwdriver into the slot both on the right and lift of the bottom corners on the back to release the hooks that hold the upper unit.6. Lastly, put a screwdriver into the notches on the bottom of the printer located in the front right and left, they are spring loaded.7. Remove cover.8. The head lock release screw is in the right side of the printer and is partially covered by the lower housing. I drilled a half inch hole into the side as to be able to insert a screwdriver. Turn the screw to the left and the head will rise out of the locked position. You only need to turn enough to release the head.9. Clean the sponges and any areas you see with excess ink.10. Place the cover on the unit enough to plug the white ribbon back in and turn the unit on.If the printer lights stop flashing then you are all set.

Read Full Q/A … :
Unknown Printer