Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The common reasons for this issue are various, for instance, the paper input tray is overloaded, dust or moisture can affect the paper feed or paper pick rollers, the printer driver is old, etc. Thus, the printer cannot detect the paper that has been inserted into the tray.
The way I solved it was to restart the print spooler. This will reset Window`s communication with the printer and Windows will no longer think the printer is out of paper. Problem solved.
Paper Trays

Printers have at least one tray — and sometimes several trays — that hold paper for printing. Simple desktop printers usually have a single tray you adjust for different sizes of paper, envelopes and other materials.

Open the Start menu, type “Settings,” and go to the Settings app that appears in the search results. Next, click on Devices and navigate to Printers and Scanners on the left pane. From there, click on Add a printer or scanner and wait for your computer to scan for available printers.
Load the paper into the paper tray before sending the data to the printer. When the printer receives data from the computer, it feeds a single sheet and begins to print.
just GOTO settings > printer properties of your printer > preferences>paper quality >change the paper to A4 size . and restart the printer.
Paper Overloading

Because many desktop inkjet printers are top-loading, it can be easy to overload the tray.

Paper that is loaded incorrectly in the input tray might prevent the tray from closing completely. Remove any paper from the input tray, and then reload the paper correctly before closing the input tray. Grasp the handle on the input tray, and then pull the tray toward you to open it.
This is often caused by the fact the pick-up roller is worn out. The layer of rubber around this plastic part overtime gets too smooth, preventing paper from feeding properly into the printer. This fix is not really hard, will take no more than half an hour and costs around 10,- (Euro or Dollar).

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.

Read Full Q/A … :
Unknown Printer

Paper jam in tray 2 (but no paper pulled from tray) also M476DN models
ANSWER : Isopropyl alcohol is not recommended for rubber rollers. It dries out the rubber and hasten it’s cracking and breaking. It will do nothing to restore the grip. Those rollers are really hard to replace. It would be easy if that dumbass secondary menu really worked. None of the techs I’ve spoke to ever got into it. Everyone I know sends a print job and listens for the roller to rotate into position where you can pull it off.

Read Full Q/A … :
Unknown Printer

Tray 1 (upper tray) paper feed problem
ANSWER : There is no way of adjusting the distance of lift. Could be that the pickup roller is worn enough that it will pick up a sheet that is higher, but not one that is lower down. You can look at the end of the roller that first makes contact and see if it is worn smooth.

Read Full Q/A … :
Unknown Printer

hp 8600 pro when power on, paper jam message appear but there is no paper jam in the tray
ANSWER : Hp 8180 Photosmart All In One code keeps says paper jam and carriage jam when neither are jammed. I followed all the recommended things to do. I live in Raleigh NC any place to take this or any suggestion.

Read Full Q/A … :
Unknown Printer

Brother MFC-J6510DW extra paper tray.
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))

Read Full Q/A … :
Unknown Printer

LJ 4250N Tray 2 Clearing Paper Path 41.3 Error
ANSWER : i saw sAme problem in my client printer hp lj 4250 . its toner problem . when i am the toner change then printer is 100% ok.

Read Full Q/A … :
Unknown Printer

Paper tray
ANSWER : Printer is a HP 1320 laser jet

Read Full Q/A … :
Unknown Printer

Printer stops pulling paper from tray 2 after a few sheets
ANSWER : Sticking pickup roller solenoid. Pretty easy fix. You need to remove the right side covers. The back one just slides off, but the top holds the front one. I usually just take the 2 right side screws off and gently lift the top enough to pop off the side panel. Open the metal door on the formatter assy. Then release the tab in the middle. There’s also a tab at the front of the panel. When putting it back on, make sure you engage the rocker switch and the metal rod before pushing it into place. When you get it open, you’ll see the solenoid at the bottom front. There’s 1 screw holding it in place. Remove it and take the top plate and spring off. Be careful not to lose the spring. Then scrape off the gooey crap on top and clean off the plate as well. I put a piece of thin sticky backed felt in place of the remnants of the disintegrating sponge that HP uses. You can find it at the hardware store used for the bottom of chair legs.

Read Full Q/A … :
Unknown Printer