Series II fixes

An Er/02 error message indicates the toner cartridge access door is not closed completely. Close the toner cartridge access door completely.

An Er/02 error message indicates that the toner cartridge door is open or not closed completely. To resolve the error, open the toner cartridge door, and then close it completely.

HP introduced the mass-market laser printer, the LaserJet series II, in March 1987.

If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.

Quick fix. Error code e02 occurs due to overheating of the printhead or when the paper is not correctly placed into the input tray and therefore the paper feed rollers are unable to pick up the paper from the paper tray.

System error 02:10

A problem has occurred with the carriage assembly. Turn the printer off and allow a few minutes for printer to cool. Turn the printer on and attempt to verify functionality. If the problem persists, click on Support at the top of the page for additional HP support and contact options.

An E2 error occurs when the printer attempts to print a single-page or multi-page print job, and the paper length selected in the print settings does not match the length of the loaded paper. The printer then prints out the first page with errors.

The “Error Code 02” or “01” means that there is a problem with the software on the unit.

The E2 error code is an AUTO-STOP PROTECTION indicating a short or open circuit in the indoor pipe sensor. Unfortunately, there is not any troubleshooting to resolve this error. The unit will require a repair service.

Requirements: Operating System – Windows 7, Windows 8, Windows 8.1, Windows 10.

Among the more common technical issues that may bring down a printer are disconnected cables, malfunctioning routers, and low ink levels. Moreover, software problems such as interrupted connections or incorrect settings in your system`s drivers can also cause your printer to show up as offline.

a misprint or misspelling in a text.

There is a communication failure with the imaging drum. Turn the printer off and then on. If the error persists, replace the imaging drum. If the error still persists, contact HP. 10.000X Supply memory error or 10.100X Supply memory error.

The Print Spooler is software built into the Windows operating system that temporarily stores print jobs in the computer`s memory until the printer is ready to print them. In some circumstances you may need to stop and/or restart the service.

Solution. Error 2 is a network error code produced by Windows NT that generically translates to: “The system cannot find the file specified.”

An Er/02 error message indicates the top cover is not closed completely. Close the top cover completely, and then lower the scanner assembly.

If you have NOT recently replaced the fuser or moved the printer around, then the 50.2 fuser error indicates you may have an actual fuser failure and the fuser needs replacing.

What happens? The most common causes of System Error Code 2 are typically either corruption or damage to the registry or device driver conflicts. Some other causes might be: Hardware problems. Virus Infection.

Error code 2 means: The system cannot find the file specified.

Errors 2 & 3 are generally associated with one of the thermistors (temperature sensing components) and are either because: The system has become too hot.

The most likely reason for this error code (14-2) is that the Mixed Reality display and composition stack failed to initialize. Your PC`s graphics card may not be compatible with Windows mixed reality. Try uninstalling the graphics driver and installing the latest one from the graphics card manufacturer`s website.

Exit code 2 signifies invalid usage of some shell built-in command. Examples of built-in commands include alias, echo, and printf.

Alfa-02 Error Code explained

Ubisoft support staff on the support forums describe it as a “connectivity error“, and the suggestion is that you should visit their connectivity troubleshooting page and work your way through the solutions there.

Check for the Version of the Facebook and iOS System

Sometimes the outdated version of the application and device operating system can also cause the error code 2. So, you can try to fix the Facebook error code 2 by checking and updating the version of the Facebook and device`s operating system.