HP OfficeJet G55

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

23 or 30.03. 45 Scanner Errors. The resolution for either error is to, if preferred to send a firmware update, then replace the flatbed scanner assembly. It has been found that it is in most cases the internal lamp that has failed, but is not available through HP as a replaceable part.
When a 30.03. 23 Error Alignment Calibration Failure appears on the control panel, it indicates there is an issue calibrating the scanner. If there is also a copy or scan quality issue you will see a stripe of lines from the leading edge to the trailing edge of each page.
A missing or outdated scanner driver can cause your HP scanner not to work, so you should update your scanner driver up to date. There are two ways to update your scanner driver: manually and automatically.
However, there are a few common reasons that pop up the most: Loose or damaged cables: If the wires are worn out, it might prevent you from connecting to your scanner. Missing drivers: Your computer can`t properly “talk” to your scanner if the right drivers aren`t installed.
The error may occur when there is a communication issue between the formatter and the scanner. Turn the printer off and then back on to clear the error message.
The 52 Scanner error indicates that the printer has experienced an internal hardware error. Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket.
When a 30.03. 23 Error Alignment Calibration Failure appears on the control panel, it indicates there is an issue calibrating the scanner. If there is also a copy or scan quality issue you will see a stripe of lines from the leading edge to the trailing edge of each page.
Normally a 30.01 error is a paper jam in the document feeder. Id check the ADF sensors and look for anything that could be causing a false alarm by the printer. and here: /t5/Multifunction-and-All-in-One/HP-CLJ-CM4730-MFP-30-01-34-scanner-failure/td-p/5963917#.
Go to Solution. This error indicates a RAM failure. The specific memory is internal memory not one of the dimm slots. You can try removing any additional memory first to see if the device will boot but likely this is a failure of the formatter and you would need to replace the formatter.
Method 1: Update your HP scanner driver using Device Manager

2) Type “devmgmt. msc“, then press Enter on your keyboard. 3) Double click Imaging devices. Right click you scanner, then click Update driver.

If a Firewall on your computer is active, it may be rejecting the necessary network connection needed for the network scanning software to operate properly. Disable the Firewall on your computer and try the network scanning again. Temporarily change your firewall/security settings to allow network connection.
Install or add a network, wireless, or Bluetooth scanner

Here`s a way to do it manually. Select Start > Settings > Devices > Printers & scanners or use the following button. Select Add a printer or scanner. Wait for it to find nearby scanners, then choose the one you want to use, and select Add device.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

scanner failure
ANSWER : That is a pretty old machine. You won’t be able to get any parts for it. Time to get a new one.

Read Full Q/A … :

HP OfficeJet G55

Black ink in HP G55 casing
ANSWER : Hope someone can help me with a HP Officejet G55 “problem”. I took my G55 apart and cleaned the service station as explained here on this site as it was obviously full of ink “goo” and the printer had refused to print in the middle of a printing, displaying a remove black cartridge etc message even though the HP45 cartridge itself showed it was not even half empty. I had no major problems with the cleaning procedure, but after putting it back together there was “the problem”! The Carriage with the ink cartridges gets stuck just before its about to enter its “home base” over the service station and I get a “fix carriage jam and then push enter” on the screen. I can see and hear that it is the service station that gets stuck just before the “cycle run” of the carriage is about to end. You can hear the service station motor gear slip on the plastic gear mechanism of the service station, not being able to move it any further but tries for a moment with a grinding noise and then stops. Is there some sort of time alignment I need to do between the carriage, service station mechanism and service station motor? Like service station pushed to the back, carriage to the far left etc etc. Ive tried a few “scenarios” but the carriage allways gets stuck in the same place with the grinding noise from the service station/motor “gears”! If I move the carriage by hand it goes from the far right to the far left without any problem. Its just when the service station/motor etc is engaged, that this happens. Hope someone can help me with this problem. Thank you.

Read Full Q/A … :

HP OfficeJet G55

hp 2510 all in one
ANSWER : my paper won’t feed in my all in one Hp2510 printer

Read Full Q/A … :

HP OfficeJet G55

HP psc 2110 all-in-one won't turn on after power o
ANSWER : left the printer on now i cant get the printer to go on

Read Full Q/A … :

HP OfficeJet G55

Hp 3110 ink system failure
ANSWER : Well I just solved my issue with my hp 3310 displaying the ink error code. I held the OK cancel black and color buttons down at same time. And while holding those down hit the power button when machine shut off I released buttons hit power button on it came on and shut off. Hit power button again and it will reset machine and run a maintainace program. When all is done run a print report. Mine works fine. Good luck.

Read Full Q/A … :

HP OfficeJet G55

HP PSC 1210 Service Manual?
ANSWER : Hi Abe,

Read Full Q/A … :

HP OfficeJet G55

HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr

Read Full Q/A … :

HP OfficeJet G55

HP P1007 Printer Engine Scanner Error
ANSWER : My hp laserjet p1007 printer shows a massage that engine communication error

Read Full Q/A … :

HP OfficeJet G55