Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The machine may be configured incorrectly. Check the Printing Preferences to ensure that all of the print settings are correct. The printer driver may be incorrectly installed. Uninstall and reinstall the machine`s driver.
If the printer shows offline or status is not available then the computer and printer are not communicating with each other. If the printer is connected with USB, try the following: Make sure the printer is powered on. Make sure the USB cable is fully inserted into both the computer and printer.
Start by checking your hardware

If you`re using a wired printer, make sure that the printer cable is properly connected from the printer to your PC. For wireless printers, check the wireless connection. Make sure the printer`s wireless option is turned on and available.

The printer could be dirty. Solution: Arrange to have your printer cleaned. The toner cartridge may be nearly empty. Solution: Replace the toner cartridge.
Some of the most common printer problems that most of us have experienced include paper jamming, slow printing, uneven printing, and wrong colour output. If you use your printer frequently, we know how annoying it can be to have persisting problems with the printer.
Among the more common technical issues that may bring down a printer are disconnected cables, malfunctioning routers, and low ink levels. Moreover, software problems such as interrupted connections or incorrect settings in your system`s drivers can also cause your printer to show up as offline.
Paper Jams

This is a common laser printer problem. Primary causes include grime, dust, worn rollers, or incorrect paper weight. The most basic way to prevent paper jams is simply through regular cleaning of your printer. Also, replace parts as needed.

If a corresponding LED is solid red, along with a blinking red status light, check the following: A small amount of toner might remain in the toner cartridge. A minor error might have occurred.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Samsung clx-3305 transfer belt changed, and still problems
ANSWER : You will need to enter Technician Mode on the printer.

Read Full Q/A … :
Unknown Printer

Print problem with Canon MP620
ANSWER : Open the front of the printer.

Read Full Q/A … :
Unknown Printer

Chatter from toner cartridges before printing
ANSWER : The video may have the answer you want

Read Full Q/A … :
Unknown Printer

Clean Printing
ANSWER : Simply look at the drum and the belt. If there is still a latent image on either one, that is what you should replace.

Read Full Q/A … :
Unknown Printer

Printing Problems
ANSWER : http://www.fixyourownprinter.com/posts/34513

Read Full Q/A … :
Unknown Printer

problems with printing
ANSWER : Check your settings to make sure they are Left to Right print order. If they are then reinstall printer driver. If that doesn’t correct problem uninstall printer, reboot computer, and reinstall printer.

Read Full Q/A … :
Unknown Printer

Printing problem
ANSWER : Either the cartridge carousel jumped out of alignment or the carousel brake solenoid is sticking. Both issues have been covered on the forum before. Do a search.

Read Full Q/A … :
Unknown Printer

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Read Full Q/A … :
Unknown Printer