Samsung CLP 300

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

– If the squealing or squeaking noise occurs, the toner cartridge is the cause. You will need to replace the toner cartridge (TN630 or TN660) to resolve this issue.
– If the grinding or clicking noise occurs, the toner cartridge is the cause. You will need to replace the toner cartridge (TN630 or TN660) to resolve this issue.
Worn, damaged or bent suspension parts, wheels or wheel hub bearings, caused by an accident or hitting a pothole or curb, can cause tread cupping, feathering or scalloped wear. Any of that can make tires squeak. A trip to your repair shop is best to diagnose and correct abnormal tire wear.
Lightly dampen a clean, lint-free cloth with bottled or distilled water, and then squeeze any excess liquid from the cloth. Press the cloth against the rollers and rotate them upwards with your fingers.
Use isopropyl alcohol or ethanol according to the manufacturer`s safety guidelines, as applicable. Wipe the roller with a lint-free cloth dipped in isopropyl alcohol or ethanol. After cleaning the roller, make sure that no lint or other material remains on the roller.
When the Filament Maker emits a cyclic, loud, squeaky noise, it indicates that the screw is touching the barrel. Beside being quite annoying for the user, this phenomenon often indicates that the Filament Maker is operating sub-optimally, and that the extrusion results are being disturbed.
Your phone or tablet may make sudden notification sounds if you have unread or snoozed notifications. You may also be receiving unwanted notifications or repeating notifications, such as emergency alerts or a noisy app.
Paper pushed too far into the input tray when it is loaded, might feed into the printer incorrectly, causing the paper to tear. Paper stacks loaded into the input tray with too many or too few sheets of paper, might feed into the printer incorrectly, causing the paper to tear.
Aside from being a nuisance, there may be a problem. If your tires seem excessively loud, you need to investigate the cause. A noisy tire is not always dangerous or fixable. In other cases, vital parts of your wheels are breaking down or damaged.
How can you stop a wheel bearing making noise? Unfortunately you can`t: the only solution to a worn, noisy wheel bearing is to have it replaced by a garage; bearings are not repairable.
Liquid Bearings, 100%-Synthetic Oil for All copiers and Printers, Keeps Them Freely Moving, loosens Sticky Components!
Use isopropyl alcohol or ethanol according to the manufacturer`s safety guidelines, as applicable. Wipe the roller with a lint-free cloth dipped in isopropyl alcohol or ethanol. After cleaning the roller, make sure that no lint or other material remains on the roller.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Samsung CLP-365W Blinking Error
ANSWER : Hi, I’ve fixed the same error installing the fw CLP365W_v3.00.02.16.exe

Read Full Q/A … :

Samsung CLP 300

Printer won't print – reassembled from an imaging unit clean..
ANSWER : You have to realize the difficulty of troubleshooting a printer that an unexperienced person has taken apart. The pickup roller issue doesn’t sound like it is a worn pickup roller. It seems more like something wasn’t quite put together and is binding the drive motor. Since I can’t hear it or see it, that would be my best guess.

Read Full Q/A … :

Samsung CLP 300

Samsung ML-1610 toner low warning need reset help!
ANSWER : in my printer shows the online error problem

Read Full Q/A … :

Samsung CLP 300

Clean Printing
ANSWER : Simply look at the drum and the belt. If there is still a latent image on either one, that is what you should replace.

Read Full Q/A … :

Samsung CLP 300

Chatter from toner cartridges before printing
ANSWER : The video may have the answer you want

Read Full Q/A … :

Samsung CLP 300

Samsung CLP-300 Image Ghosting
ANSWER : Hi there – did you resolve your issue? It exactly mirrors the issue with my Samsung CLP-310. Each print carries across to the subsequent print as a ghost/smeared image and I diagnosis has revealed the transfer belt (ITB) has smeared toner remaining post each print. I was therefore considering replacing the Transfer Belt, but fear it is not the issue as you found. Whatever should be removing the toner from the Transfer Belt post print, is not, and then I get smeared ghosting on subsequent prints of the last print. The only mitigation is to print 5 blank pages post print, then the ghosting/smearing reduces to nearly zero (proving that the toner is being removed partially at least)…. Any help gratefully received.

Read Full Q/A … :

Samsung CLP 300

replace with new imaging unit error
ANSWER : samsung clp 365w firmware

Read Full Q/A … :

Samsung CLP 300

REMOVE FUSER UNIT
ANSWER : It looks real easy. https://www.youtube.com/watch?v=fbilywC620A

Read Full Q/A … :

Samsung CLP 300