Resurecting a an epson stylus color 3000

There may be several reasons behind the issue, such as empty ink cartridges, Clogged Print Head Nozzles, and Incorrect Print Settings. There may be a fault in the settings of Color Management as well. You can fix it via Running a Nozzle Check or enabling the Print Settings to Color or Replacing the Ink Cartridges.

The Cause of Clogs

Printheads clog because nozzles get blocked by either air or ink. Clogs usually happen when: You keep printing with depleted ink cartridges. Using empty ink cartridges can result in air bubbles that can clog your cartridge and/or printhead.

If the printer is printing black only, the Ink option in the printer driver may be set to Black instead of Color or a setting in the software may be set to print black only. Also, the print head nozzles may be clogged.

If the color is still not coming through, let the printer sit for about 10 minutes before running a second cleaning, this allows the ink to soak on the printhead. It might take a couple of cleanings to get a cartridge properly primed, especially if the printer has been sitting for a while.

Clean the printheads: Sometimes the issue why you are unable to print in color is because our printheads are clogged with ink. Clean the printheads and then print a document to check if color printing works. Some printers also have in-built programs that can clean themselves so remember to check for that.

Make sure the document is set to print in color and enable the color printing feature on your printer. Check the ink level and replace the ink cartridge if necessary. Clean the print head. Most printers have an automatic cleaning feature now.

Go to Control panel and then Devices and Printers. Find and right-click on your printer and click on Printing Preferences. Go to Quick Setup tab and then select Grayscale.

Kindly go to Start > Settings > Update and Security > Troubleshoot > Printer > select Run Troubleshooter. You may also check the print settings to ensure that the option for black and white/grayscale is not selected.

You can visually inspect the remaining cartridge levels on your printer. If they are full but you still cannot print properly, check the cartridge`s expiry date. Expired ink cartridges often dry up which causes problems in the print results.

Hey, you can reset Epson ink cartridge without resetter! As shown above, you can reset Epson chips by pressing and holding the button above the chip with a bent paper clip for 10 seconds.

Check the ink levels

Sometimes, the printer may not print black ink because it is low or empty. You can check the ink levels on the printer`s display, or by using the software that came with your printer. If the ink level is low, replace the cartridge or refill it according to the manufacturer`s instructions.

Select Start > Settings . Go to Devices > Printers & scanners > select a printer > Manage.

If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.

The easiest remedy for this is to open the box and stand the cartridge upside down for a few minutes before using. Next, get a damp paper towel, fold it into quarters and the set cartridge print head down onto it, holding it there for three minutes. This will help to prime the print head and pull the ink out.

The easiest remedy for this is to open the box and stand the cartridge upside down for a few minutes before using. Next, get a damp paper towel, fold it into quarters and the set cartridge print head down onto it, holding it there for three minutes. This will help to prime the print head and pull the ink out.